flsenior

I see the progress bar operate each time I make a change. The change, however, never remains at 30% (or any other setting) it always goes back to 100%. Button A and Button G are on the same 2486 Keypad dimmer.

When I go into the scene and look under Button G the family room ceiling is set at 100%. When I move the slider to 30% the ISY writes and the slider stays at 30%. Once I go to another light switch or scene and come back, the Button G setting for the family room is back to 100%. All other lights in this scene that are also controlled by Button G operate as I set them.

I have a button "TV Lights" (button G) on an Insteon Keypad link dimmer. It is a controller for a scene "TV Lights". Included in the scene is a light "family room ceiling" (button A) which is also on the same Keypad link dimmer. When the family room ceiling (button A) is turned on the lights set at 58%. This button is set as a responder to the scene TV Lights. In the scene TV Lights the family room ceiling is set to come on at 30%. When I use the TV Light (button G) the family room ceiling comes on at 58%. If I use my iPhone and Mobilinc to turn on the scene TV lights the family room ceiling comes on at 30% (which is what I want) What is the problem with the TV Light (button G) that overrides the scene TV Lights setting for the family room ceiling?