Techman

It's the same display for Aeotec.  In this screen shot the Aeotec firmware version is 1.10
 

You can just ignore the Binary sensor node. Sometimes extra nodes are created depending on the device and the Zwave controller.
I created a folder and move unused nodes into that folder which unclutters the device table.

The Zmatter dongle is powered by the eisy, you don't need an additional power supply

Try doing a factory reset on the switch, then a restore device.
It's also possible that there's a program that has a link to the switch. Take a look at your log to see what's happening at 3:59am

Try deleting the program, then recreating it.
Also verify that the time is set correctly in the admin console

Powercycle didn't help, ticket submitted
 
UPDATE:  Just heard back from UDI, it's a known bug. They expect a fix by the end of the week.

You can recreate the query all program.  Apparently, it doesn't migrate over.
IF
    Time is 3:00AM
Then
     Set ISY Query
Some programs don't migrate over completely, so you'll have a line of code that needs to be manually updated. If you're still having issues with a particular program post a copy of it the forum and we'll try to debug it for you.
 

The IoX Launcher supports Java 8. It may not support OpenJava (OpenJDK)
You can try clearing your java cache and downloading the IoX Launcher again
    https://isy.universal-devices.com/start.jnlp

@jdlugosh
The information you're looking for is towards the bottom of this manual.
2334-2222 Keypad Dimmer manual.pdf

Your program will only run if the time is exactly 9:00 pm and the light is switched on at exactly that time.
Change the first line to  Basement Lights STATUS IS ON
 

There's no option to make that change. Maybe in a future firmware update.

This is how it should be written..  An else statement will only run if the IF statement is false.
IF
   Status 'Second Floor / Bathroom Fan' is On
Then
   Wait 5 minutes
    Set 'Second Floor / Bathroom Fan' Off
Else
 

You could do it with a program
IF
      Motion sensor is switched on
THEN
      Turn on light
       Wait xx minutes
       Turn off light
ELSE
 

When you open the IoX Launcher, the PG3 option should be listed under the Admin options
Once you log into PG3x you will see the drop down menu for the Node store

Try clearing your java cache, including checking the box "installed applications, then download the IoX Launcher
https://isy.universal-devices.com/start.jnlp
 

UD is working on support for GBL. It should be supported in the next firmware update.

Try doing a restore device on all the devices in your scene, then do a scene test. Did that resolve the error?
Most newer devices will not respond to an all on as that function has been removed.
Are you using the same PLM that you had installed on the ISY?
Your issues are not typical, and may be related to an incomplete migration.
 

@RRoyceus
If you click on the device, and assuming that you're not using scenes, or programs to adjust the on level, you can set the on level and ramp rate. When a program turns on the light it will be to the level set in the device window. When the light is turned on, the "on" will change from "0" to the level set in the "on level"

Your device link tables are corrupted. Did you try doing a restore device?
Also do a show device link tables for the eisy. If the eisy link tables for the KPL are corrupted, then you you'll have to delete the KPL from the eisy and re-link it.

Are you able to access your programs and devices via the admin console?, If so, then power cycle the eisy. 

Are you on a PC or MAC?
Clear your java cache including checking the box "all installed applications", then download the IoX Launcher from here:
https://isy.universal-devices.com/start.jnlp
Let me know if that resolved the issue.

@ShawnW
I just ran some more tests on the Smart Switch 7 Switch 7. 
By changing Param 21 (Watt report Threshold) to 10, the switch reported the on/off load change within 2 to 3 seconds. So it will most likely work for your application.
 
 

The parts you mentioned are all that's needed. I believe that the enclosure for the Zmatter board is currently out of stock.
Instead of buying the cable kit you might want to buy a USB PLM, which is currently in stock at Insteon, either way is workable.

I rebooted after the first time it happened. I just tried a package update and reboot, so I'll see what happens going forward.
The last time it happened it triggered my siren program at 3:00 am
UPDATE:    I traced the problem back to an 8 button KPL. The link tables were mismatched/corrupted. I did a factory reset and restore which seems to have fixed the problem. 
 

Unplug you PLM, wait about 10 seconds, then plug it back in. Is the green led on the PLM lit?
In the admin console, click on TOOLS, DIAGNOSTICS, PLM STATUS, does it show the PLM as connected?