rick.curl

I know you haven't had the opportunity to try a real Smoke Bridge yet, so I am not surprised that there seems to be a problem...but it could be a misconfiguration on my part. I have an ISY994i and am running 4.0.1 beta. I have the Smoke bridge linked to a SCO500 Smoke /CO detector and to the ISY. When I press the test button on the smoke detector the LED on the Smoke Bridge changes from solid green to blinking red, but the ISY does not respond. I have three programs- one for smoke, one for CO, and one for low battery. The smoke program looks like this: If Control 'Smoke Alarms /23.4E.6B-Smoke' is switched On Then Send notification to 'Default' content 'Smoke Detector' Set Scene 'Living room / Living room Overhead' On Set Scene 'Bedroom / Bedroom Overhead' On Else -No Actions What should happen when I press the test button on a smoke detector? What should happen if I tap the SET button on the Smoke Bridge? (nothing is happening). Any suggestions? Thanks! -Rick

I had to make one minor tweak and now it is working perfectly. I had to change If CONTROL "whatever switch you are using" is switched on Then set "outside lamp post" on to If STATUS "whatever switch you are using" is switched on Then set "outside lamp post" on I have several 8-button keypads and it was only working from the one specified in the program above, but now it works from all of them because they are all members of the same scene. ..and now all is good. Thanks very much for the suggestion on this! -Rick

Thanks! That makes sense. When I went to set it up, it looks like I have to do it as three programs: Lamp post timer (already exists) Lamp post on (the first half of your suggestion) Lamp post off (the second half of your suggestion) Is this correct, or is it possible to combine your "ON" program with your "off" program? ...So I've got it set up and I'll wait to see if the timer still works OK. Thanks again! -Rick

I have a scene set up that turns on all of our outside lights, which are spread across five responders of different types. Only one of these lights is controlled by a program that turns the lamp post on at sunset and off at 11PM. I would like to arrange it so that if I turn on the "all outside" scene it will turn on all of the outside lights (as it does now), but when I turn off the "all outside scene" it should leave the lamp post on if it is within the time range that it should be "on" anyway. I know it can be done. but I am new to the ISY994 and while I have got everything else working exactly as I want it, I have not figured this part out yet. Thanks for any guidance! -Rick