Jimbo.Automates

For #2 add desired outputs in PG3 Elk Plugin configuration. I really wish I'd have fished wires to my garage door openers when we installed the elk and ran wires everywhere else... Sent from my Pixel 8 Pro using Tapatalk

It's in the PG3 UI, but it's updated in github as well now. Thanks.

Yes, this is the same issue reported and fixed in the other thread. Sorry I misspoke upgrade vs. update. But good you figured it out. ModuleNotFoundError: No module named 'kasa' Sent from my Pixel 8 Pro using Tapatalk

Yes, this issue was resolved. Make sure you have recently run an update packages so you have the latest release then reinstall the nodeserver. Sent from my Pixel 8 Pro using Tapatalk

The PG3 Node server for ELK Security Version 3.10.7 is released. See the Release Notes

It shouldn't matter, but you'll have to submit a bug report to UDI for @Chris Jahn and @Michel Kohanim to take a look Sent from my Pixel 8 Pro using Tapatalk

I have no control of this, it is handled by the Admin Console. Try restarting the AC. Sent from my Pixel 8 Pro using Tapatalk

Yes, I did, which is why I said it you still want/need Telegram then try to set it up again and we can see what the issue was.

I was able to fix this so 3.0.9 should now be available. Sorry for the confusion.

I figured out how to update it, so version is back to 3.0.6, please re-install in same slot to fix it. I'll enjoy Christmas better knowing that I didn't break everyone

So sorry, I just realized it was broken today. I accidentally released Harmony plugin code into Hueemulator release and I am traveling so can't fix it. I'll see if we can get it fixed. There's no rollback ability in PG3. Sent from my Pixel 8 Pro using Tapatalk

Sorry for the delay, I must have missed your post while I was traveling. Yes, the Telegram service is tricky to setup, I'd like to make it cleaner in the future when I have some time. If you really want/need Telegram then try to set it up again and PM me the file from 'Download Log Package' if you encounter issues.

Yes, "Send Sys Custom With Params" is the current recommended method to stick with, all others are legacy.

This is likely a configuration issue, but I created an issue to fix in the future: https://github.com/UniversalDevicesInc-PG3/udi-poly-notification/issues/53

Issue created: https://github.com/UniversalDevicesInc-PG3/udi-poly-notification/issues/52 Will look into it after the holidays.

Sorry for the delay, I am traveling for the holiday. I created an issue https://github.com/UniversalDevicesInc-PG3/udi-poly-kasa/issues/21 But it is also have problems communicating with many of your devices: 2023-12-21 10:55:55,534 Thread-11 udi_interface ERROR Controller:_add_manual_devices: Timed out getting discovery response for 10.100.100.170 trying to connect to 10.100.100.170 2023-12-21 10:56:00,538 Thread-11 udi_interface ERROR Controller:_add_manual_devices: Timed out getting discovery response for 10.100.100.169 trying to connect to 10.100.100.169 2023-12-21 10:56:05,548 Thread-11 udi_interface ERROR Controller:_add_manual_devices: Timed out getting discovery response for 10.100.100.168 trying to connect to 10.100.100.168 2023-12-21 10:56:10,553 Thread-11 udi_interface ERROR Controller:_add_manual_devices: Timed out getting discovery response for 10.100.100.160 trying to connect to 10.100.100.160

DO NOT UPDATE HueEmulater to 3.0.9, it is currently broken and will be fixed after Christmas

You only need the bold line, you don't need the other 3 lines to send a message.

This indicates and error on the PG3 side, check the PG3 UI. I'll look into it when back home after the holidays. But in reality, this method is not needed anymore and was only left there for legacy users.

The Group's should be added to the list of DeviceOrGroup but I just looked at mine and it's not adding Groups, although you should have 'all' which sends to all devices. I'm pretty sure this used to work so I'll have to look into it when I'm back home after the holidays. Issue created: https://github.com/UniversalDevicesInc-PG3/udi-poly-notification/issues/52

Sorry, for the delay, I'm traveling for the holiday. Not sure what happened, but I can't upload the new version while out since I only brought my work laptop, not my personal one which has all the data needed. I'll take a look when back home after Christmas.

Did you "Refresh Store"? it shows up on my production system. Sent from my Pixel 8 Pro using Tapatalk

With the new ability to use custom content there's not much need to use the REST interface. Not sure of any other reference for pushover besides their website. Sent from my Pixel 8 Pro using Tapatalk

Yes, they are rolled each day at midnight. They still exist, but can't see them in PG3 UI. Sent from my Pixel 8 Pro using Tapatalk

That's great, but odd. Anything new in the log? Sent from my Pixel 8 Pro using Tapatalk