On 3/29/2022 at 11:21 PM, garybixler said:

Hi

Hi, Just wondering if there would be any interest in creating a Somfy node server on PG3. I think the info can be found here:

somfysystems.com/en-us/somfy-synergy-api

 

Thanks Gary

Sure if someone builds it.   

1 minute ago, DennisC said:

For PG3 Nodeserver upgrades, just stop and restart the Nodeserver. The newer version will install itself with no impact to programs.

 

For that matter, if you delete and then reinstall the same Nodeserver in the same spot your programs are also not impacted.

Got it, so next time I see a new version number in the store I just stop and then restart the node server and it will auto upgrade. Got it.  Will try it next version release. Thanks all, I knew I was missing something.

Question on PG3.  How do I upgrade a Node Server like I do in PG2?  Let me explain.  In PG2 if a new version of a Node Server is released, the button in the node server store says Upgrade (or something like that).  Makes it easy to upgrade and keeps any programs intact I have written in the ISY with the Node Server.

 

In PG3 I don't get an upgrade option.  If the developer publishes a new version of the Node Server to the store, I only get an Install option, I then need to Delete the old/existing Node Server (destroys any programs written in the ISY interacting with that Node Server) and then I need to Install it and Configure the new version.

 

Its a pain, so wondering if I am missing something here?  ps Using the Dyson Node server on PG3 where this is happening but I believe this is a PG3 thing not a specific Node Server thing. 

Got it.  There are so many forks of the 'unofficial' API given Dyson doesn't support anything but their app.  I know xKing supported oscillation in his PG2 version which stopped working when the second factor authentication was introduced.  Either way will look out for updates and happy to test anything you need on a PH02 if helpful. 

 

To Close this out, Gordon corrected the problem and the node server is up and running.  Thank You.  Working well.

 

@glarsenNot big concerns but thought I would ask:

1. I have a Dyson Pure Humidify+Cool Cryptomic (PH02) so selected it as a DEVICETYPEPUREHUMIDIFYCOOL = "358".  Assume that is the right device type?

2. The Node Server shows the current humidity percentage but there is nowhere to control humidity:

   • On/Off

   • Auto/manual

   • If Manual the Target relative humidity

3. For Oscillation only allows you to set it at On or Off not  Off, 45, 90 or Breeze per the remote

 

@glarsen, done and much thanks in advance.

15 hours ago, Jimbo said:

each NS has a sub forum https://forum.universal-devices.com/forum/326-st-inventory

Sent from my Pixel 6 Pro using Tapatalk
 

Is that true for all node servers? Cannot find the PG3 Dyson Node Server sub forum.  

@Bumbershoot Thank You for pointing me in the right direction.  Will wait to hear from @glarsen

 

For future enhancements on PG3 would be great if there was a link in the node server store to the prefered contact method of the Node Server developer.  Would also be nice to eventually have a space for folks to rate (1 to 5 stars) and also comment  on node servers so one can look at the community feedback before buying a node server.  Understand this is still Alpha, just some future suggestions, if UDI really wants this to scale, this is key, as I am sure UDI doesn't want to be doing customer service and support for the 100s of node servers. @bpwwer

 

Appreciate everyone's hard work on this, this is an awesome step forward with PG3.

So what do we do if a Node Server we paid for doesn't work and there is no (obvious) way to contact the developer?  Not sure how to even contact the DysonPureCool Node Server owner (Gordon Larsen)?  Is he on this forum?  Right now it doesn't install.  @Michel Kohanim

 

 

I don't get that option:

So finally got around to installing PG3.  I installed one of the free node servers no problem.  Then linked PG3 to my portal account and purchased the DysonPureCool node server.  So far so good.  Went to install it but it will not install (I did purchase it and $10 hit my credit card), so I know that piece worked.  This is what the log says.  Doesnt mean anything to me.  Thoughts on how I get to install this Node Server?

PS. there wasn't a PG3 DysonPureCool Node Server Forum topic so posting here.

Any help appreciated.

2/14/2022, 13:02:11 [pg3] info: [00:21:b9:02:50:a1_9] :: Creating Nodeserver 'DysonPureCool'
2/14/2022, 13:02:11 [pg3] warn: [00:21:b9:02:50:a1-9] :: NodeServer folder exists, removing... /var/polyglot/.pg3/ns/00:21:b9:02:50:a1_9
2/14/2022, 13:02:14 [pg3] error: unhandledRejection REPORT THIS!: Error: Request failed with status code 404
    at createError (/var/polyglot/node_modules/axios/lib/core/createError.js:16:15)
    at settle (/var/polyglot/node_modules/axios/lib/core/settle.js:17:12)
    at RedirectableRequest.handleResponse (/var/polyglot/node_modules/axios/lib/adapters/http.js:231:9)
    at RedirectableRequest.emit (node:events:365:28)
    at RedirectableRequest._processResponse (/var/polyglot/node_modules/follow-redirects/index.js:399:10)
    at ClientRequest.RedirectableRequest._onNativeResponse (/var/polyglot/node_modules/follow-redirects/index.js:57:10)
    at Object.onceWrapper (node:events:472:26)
    at ClientRequest.emit (node:events:365:28)
    at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:621:27)
    at HTTPParser.parserOnHeadersComplete (node:_http_common:127:17)
    at TLSSocket.socketOnData (node:_http_client:487:22)
    at TLSSocket.emit (node:events:365:28)
    at addChunk (node:internal/streams/readable:314:12)
    at readableAddChunk (node:internal/streams/readable:289:9)
    at TLSSocket.Readable.push (node:internal/streams/readable:228:10)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:190:23)
2/14/2022, 13:02:24 [pg3] debug: Sending logfile to frontend :: /var/polyglot/.pg3/logs/pg3-current.log
2/14/2022, 13:02:26 [pg3] debug: Client pg3frontend_glDkc subscribed to udi/pg3/frontend/clients/7d79c39d-8386-425e-a22a-c325e2c5c0ea/log/main
2/14/2022, 13:02:26 [pg3] debug: Starting log stream for pg3frontend_glDkc :: /var/polyglot/.pg3/logs/pg3-current.log
2/14/2022, 13:02:40 [pg3] debug: Downloading logfile :: /var/polyglot/.pg3/logs/pg3-current.log

 

Probably a silly question but I installed PG3 and access it via port 3000 dashboard. All fine. How do I change the PG3 default ID and password.  Not a fan leaving it with defaults. 

Just purchased a serial PLM today on the Smarthome website.  Lets see if the order gets fulfilled, but it let me buy it, didn't say 'Sold Out'.

Uninstalled app, rebooted device, rebooted ISY, reinstalled app and tried to re-sync. The sync still has same issue just sits there with spinning wheel at this stage indefinitely 

 

 

Running the latest version of UD Mobile on IOS.  Cannot sync, during the sync it just sits at "Getting NLS Objects for Family: 10. Instance: 3" with a spinning wheel.  Just sits there with spinning wheel, no error messages.  No idea how to fix it.  

Was working fine for months before the latest upgrade to UD Mobile.  Running 5.3.3 on the ISY.

Shows 0%

I have ZRTSI (z-wave version).  Fade Stop command to it is just like hitting the My button on the Remote I believe.  But works

Tried mine with a Rest. A DON of 0 closed them, and a DON of 1 or higher just opened them, including 25, 50 and 99.  Tried 1, 25, 50 and 99, no luck.

From reviewing the forum, I found that a 'Fade Stop' from the ISY will result in the shade motor going to the 'my' position.  Can confirm it works, by using UD Mobile I issued a Fade Stop command to the Shade motor and it resulted in the shade going to the 'My' position setting.  Hope that helps

Anyone out there use the Neato Botvac even if you don't have the experience to write a Node Server, just curious if I am the only person who uses a Neato Botvac versus a Roomba?

 

7 minutes ago, asbril said:

For my purpose, the App is now perfect.  The Favorites show the % of each Scene, and my case I use a Scene for each room and the display now shows me a % to indicate if lights are on in that room. If I want know more (and possible switch On or Off lights) I just click on the Scene and all the devices show with the options to change status. Very nice.

Not sure what that has to do with my suggestion and use case?

In some instances I use Programs to turn on devices as I require the program to do a number of 'checks' before turning on the device.  When adding a Program to the favorites dashboard it would be nice if we could show the status of the device that the program is turning on or off next to the Program itself.

For example, if I have a program called 'Ceiling Fan' and add that program to the favorites dashboard, when setting up the Program called 'Ceiling Fan' as a favorite it would be nice to be able to select the device to show as status on or off against that program on the favorites screen.  I know I could just put the Device itself under the program as a favorite, but given I don't want to turn the device on unless the program does the checks I would prefer not to have the device itself on the favorites screen.  Not sure if others have a need for something like this, and I am sure it would be low on the priority list but wanted to put it out there for consideration.  That and geo fence would be awesome !!!!

@Javi Appreciate the time on this app, finally something that works with node servers, awesome job.

 

Really liking UD Mobile on iOS. Great job. On iOS will UD Mobile support GEO fences? It is the only thing keeping me running mobilinc which I would like to do away with completely if I could. 
 

Thank you keep up the awesome work.  

Thanks for the suggestions.  I have a Aeotec Multi Sensor 6 kicking around, while I hate to use it for this purpose, appears there are not similar z-wave devices per OP, so will look to try the Aeotec this weekend if time permits

 

 

I have a scene that includes a homeseer dimmer switch (HS-WD200+) and a homeseer switch (HS-WS200+).  The HS-WD200+ is the controller and the HS-WS200+ is a responder.

If both devices are on / scene on, when I press the paddle to turn the HS-WD200+ off, the HS-WS200+ turns off - expected behavior

If both devices are off / scene off, when I press the paddle to turn the HS-WD200+ on, the HS-WS200+ doesn't respond / stays off - Any thoughts what's going on?  Cannot figure it out.  The ISY 'sees'  both the On and Off paddle presses of the HS-WD200+ but the HS-WS200+ just doesnt respond to it.  Is my HS-WS200+ and I should just replace it?

I can control the scene on/off and devices directly from the ISY Console with no issue, but local on taps don't trigger the scene / HS-WS200+ on.

Do I just need to replace the HS-WS200+?

I am looking for a z-wave vibration sensor, one which is battery powered and 'relatively' small.  I know there are multi-sensors out there but really prefer a single purpose vibration sensor device.  Similar to this one, which would be perfect for my needs but unfortunately its zigbee:  https://www.aqara.com/us/vibration_sensor.html  Interested if folks have seen something like this on the market for z-wave?

 

Just FYI before someone asks, I have a range hood that I would like to detect when it is operating.  Long story but I cannot get to the wiring (would evolve busting out drywall which I just don't want to deal with).  A vibration sensor like this should work well.