glarsen

I'm trying to figure out how to use a routine (e.g. Alexa, Goodnight) to turn off a Group of Scenes. I have a number of scenes (3) which are exposed as devices and a device within a Group. Using the Group directly either manually or using the Alexa spoken works as expected, either turning the Group of scenes on or off as instructed. However, when using the routine none of the scenes within the Group are activated, only the single device. Is this expected behaviour? Thanks!

The background reporting appears to be working properly. Updates are occurring as expected.

Fernando, as soon as both devices, S7 and Note8, were updated, they reported "In" the geofence. I'll check the background reporting when we go out a little later to ensure all is working properly, but this is a good sign. Thanks again for the help!

I will, as soon as it is available!

Thanks for looking into this Fernando. Much appreciate the quick response.

Thanks, appreciate it!

Sorry, definitely set up as "Editor".

(Samsung Note 8 and Samsung S7) I'm not sure what you mean about settings. I've re-verified all of the permissions settings after the re-install of the app, as well as the power-saver settings. And of course, re-established the geo-fence location and size using the GPS locator pin (which does show in the correct location) after the re-installation this morning.

Sorry Michel, that doesn't help any. It doesn't explain why both worked just fine with the current settings until the latest UDI Mobile update was installed in the last couple of days. The phones are both at the latest version of firmware, one is my wife's and the other mine so they are rarely close enough to one another to be an issue, especially during the work day. Both have been re-booted, the app uninstalled and re-installed, permissions opened completely up and geo-fences removed and re-added. They both have the app set to "unmonitored" in the power saving settings so that they continue running in the background. They are both set to 10m and 1 minute inside a 250 m diameter fence. I've even tried changing the diameter to 400m and both still behave the same. The pin turns blue when i manually "Report Device Status", and then a minute later turns red again. The ISY status follows with in/true and out/false as expected. Both phones have also been deleted from and re-added to the portal so I'm at a loss. It kind of removes half the value of having the portal for me. It's disappointing because for months it all worked perfectly, and now suddenly, nothing. "

I'm experiencing an odd situation where both my Android devices (Samsung Note 8 and Samsung S7) are both reporting "Out" all of the time. This behaviour began right after updating the app to the latest version from Google Play on the 14th of August. Manually reporting device status will update correctly, but a few minutes later the status again reverts to "out". I've tried uninstalling and re-installing the app, removing and re-adding both devices to the portal and verifying app permissions are all set correctly, with no luck. Has anyone else experienced this?

Thanks for the update. BTW, when I try that link you posted to provide a review, I'm told the service isn't available in my geographic area. Otherwise, 5 stars!

Just set this up and it works fine. I notice though that when Alexa plays the notification, whatever was playing on the Alexa device (radio, prime music, etc) does not resume after the notification is played but remains stopped. Is this expected behaviour? Thanks!

I tried deleting devices and then disabling and re-enabling the skill, and then rediscovering devices and now everything works ok. Maybe that will work for you too.

I'm experiencing the same thing. All other Alexa functions work except UDI. UDI Portal access is ok too

Do you have uPNP enabled on the router? If you do maybe some other device caused it to override the static port forwarding for your isy. I've had it happen on my own router. Sent from my SM-P600 using Tapatalk

Thanks. Figured that out on the weekend!

Hi Anthony, Evidently I'm missing something critical here. I keep seeing the following in the log: Read ISY Event (Very Important) Python Script Traceback (most recent call last): Python script "14", line 5, in VarTypeNameVal = ISYPayload.split() AttributeError: 'NoneType' object has no attribute 'split' I can manually execute the Get Weather Data from WeatherUnderground and it works fine. But nothing else seems to happen. I have no experience with EventGhost, so I must be missing something here. Any ideas? Thanks, Gordon