Mecheng70

Tried that as well. More pissed at myself for not making a backup thinking that this was a minor release. Rookie mistake on my part.

Yes and yes. Rebooted and ticket is in.

@GJ Software Products I wish that was the case here. I upgraded yesterday around 4pmPST and today 9amPST system is not operational.

Upgraded to 5.5.5. almost all of my zwave devices are not communicating with the eisy. edit: in some cases, the devices are taking over 60 seconds to react.

I believe that you have to add each ISY to HA integrations.

not losing it. However, if plan on spending time going through any scripts, automations or layout elements that may change. Personally I rely on HA 99.99% and ISY .01% so I had quite a lot of updates in those elements. To add clarity: I was on the beta for the last couple of weeks and updated my system as needed to get it to run.

There are a ton of changes to the sensors. moving from sensors to numbers. May want to read up on the breaking changes.

If you click on it, is there a pop up?

Oh I have that. Out of convenience having it in a nice GUI that has scheduling capabilities is helpful. My wife doesn't use AC, she likes HA. And when I have to program the locks for the next Airbnb/VRBO/visiter, it is a pain in the butt. I'm not a fan of UD mobile GUI. It needs some HF mindset put into it. Agave was close to becoming a standard but I have invested time into HA. This is what I would hope UDM would be.

Unfortunately this relies on the zwave network created in HA and not the ISY.

I ran across this keymaster and thought I would share. Planning on playing with it later this week. Navigate to HACS > Explore & Add Repository. Search for “keymaster“ Navigate to Configuration > Integrations > Add Integration. Search for ‘keymaster‘. Seems like you have to install this integration for the number of locks that are in the system... Here is the write up (not mine) that I found: https://smarthomepursuits.com/how-to-install-keymaster-to-manage-z-wave-lock-pins-in-home-assistant/

Installing 0b7 now. Will check it out.

I have 2023.2.0b6 waiting to install.

Has anyone used the number.set_value? Have been playing with this today and noticed that it is throwing an error saying that it isn't successful but it does update on the eISY. Really cool that it updates both the variable and the init in the same command. However, HA reports an error: Logger: homeassistant.components.websocket_api.http.connection Source: components/websocket_api/connection.py:150 Integration: Home Assistant WebSocket API (documentation, issues) First occurred: 9:57:41 AM (16 occurrences) Last logged: 11:10:04 AM [140067744811040] Error handling message: Could not set s.casita_guest_code Initial Value to 4444.0 for 1.33 (unknown_error) from 172.16.5.71 (Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36) [140067744811040] Error handling message: Could not set s.casita_guest_code Initial Value to 7847.0 for 1.33 (unknown_error) from 172.16.5.71 (Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36) [140067744811040] Error handling message: Could not set s.casita_guest_code Initial Value to 78471111.0 for 1.33 (unknown_error) from 172.16.5.71 (Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36) [140067744811040] Error handling message: Could not set s.casita_guest_code to 78471111.0 for 1.33 (unknown_error) from 172.16.5.71 (Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36) [140067744811040] Error handling message: Could not set s.casita_guest_code to 7847.0 for 1.33 (unknown_error) from 172.16.5.71 (Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36) can confirm that it is updating. Logger: homeassistant.helpers.script.websocket_api_script Source: helpers/script.py:409 First occurred: 11:02:41 AM (15 occurrences) Last logged: 11:10:04 AM websocket_api script: Error executing script. Error for call_service at pos 1: Could not set s.casita_guest_code Initial Value to 4444.0 for 1.33 websocket_api script: Error executing script. Error for call_service at pos 1: Could not set s.casita_guest_code Initial Value to 7847.0 for 1.33 websocket_api script: Error executing script. Error for call_service at pos 1: Could not set s.casita_guest_code Initial Value to 78471111.0 for 1.33 websocket_api script: Error executing script. Error for call_service at pos 1: Could not set s.casita_guest_code to 78471111.0 for 1.33 websocket_api script: Error executing script. Error for call_service at pos 1: Could not set s.casita_guest_code to 7847.0 for 1.33

Look at octopi for that RPI. it has a web interface and there are android apps as well. I have been using this since the developer started. One thing to note, if you do connect the RPI to the printer, make sure that you snip the power line or insert a USB to USB module to only allow data through.

Need to get YTCed (YouTube Certified). 😁

It also depends on model and cost. I have owned 2 printers. Robo3D plus and currently the Creality CR6SE. Have only had one issue with the Robo3D and that was my impatience that damaged the bed. Lesson learned. IMHO if you spend less than $300, plan on spending more time troubleshooting. Then another $50-$100 in accessories. Mine sits for a couple months and then I have printathons, and it doesn't have any issues.

I was playing around with having it create a python code to read a file, perform data analysis and print out the top five results. It did. And the cool thing is that you can add to it and it was recode and provide the code.

I have two fan/lights that are each controlled by a single light switch. I am using these to control the fan and light separately. The ones I purchased two years ago were the no neutral ones. So if you have a current house, these should work. To turn them on, they are connected through Google home or HA or UD Mobile. ENERWAVE Z-Wave Plus Dual Relay Module, Hidden Smart Switch, Single Pole, 120-277VAC, 10A Per Relay, Neutral Wire Required, ZWN-RSM2-PLUS, Black, 2-Pack (New Version) https://a.co/d/i6hdXux

@shbatm If I did option 3 and then when the release 2023.2.0 comes out, how to I go back to stable release? Would that be a cluster or what?

https://www.printables.com/model/373306-zmatter-with-slideable-eisy https://www.printables.com/model/373301-zmatter-simple-holder-for-commando-strips-eisy https://www.printables.com/model/373300-zmatter-simple-holder-eisy

I have noticed that during the interview process, if I interact with the switch, it increased the time (ms) while I am doing that. I was able to get all non-battery except for one device. As for battery devices, only a couple are not working.

I am not sure if I have time this weekend to switch over to the dev channel to try the new changes. Definitely going to do a full backup before that

I have a ticket open. But me personally, I do not have a clue... ISY-Error-Log.v5.5.3__Tue-2023.01.17-18.03.32.txt

I am still struggling with programs not running on HA that control the eisy. Honestly think that it is the eisy. It becomes unresponsive several times a day. For instance, my program that turns on the simplisafe and internal cameras, did not turn off the living room and kitchen lights. Last night, I was trying to program the door locks from the rest command and getting a 404 error. Then the locks would disappear. I was able to reprogram the locks through AC, but then had to reboot the eisy. I reboot that thing 2-3x a day!!!!