GTench

LeeG, thanks, I believe that have it set up the way you mentioned. There are 8 entries for the scene "fan high" which is button C on each KPL. the scene "fan high" has 1 entry for the fan motor, 4 entries for the C,D,E,F buttons on KPL1 and 4 entries for the C,D,E,F buttons on KPL2. The 2 C button entries are controllers, the rest are responders. The 2 C entries are set to 100% and the other 6 button entries to 0% in the scene. If I click on either C button entry in the scene, it shows no entry for itself and the C button entry for the other KPL is at 100%. All other 6 button entries are at 0%. The 4 C,D,E,F buttons are set to Non-toggle (on) in each of the KPLs stusviews, yes, I have 5 scenes (light, high, medium, off, low). If I push say the high fan button © on KPL1, the C button lights and the off button (E) that had been lit goes off and the fan turns on to the correct speed. What does not happen is that the fan button © on the other KPL does not light up and the off button on the other KPL remains lit. In other words there is no synchronization between the two KPLs. I do not have for example, the C button for each KPL entered in the "fan high" scene as both a controller and responder, just as a controller... not sure if that is what you were asking thanks for your help

I have a fanlic controlled by two 8 button KPLs. Button "A" on each KPL controls the light. When I push the button on 1 KPL, the light comes on and button "A" on each KPL lights up. This is what I want. Button A on each KPL is a controller in the "fan light scene" along with the fanlinc light as a responder Buttons C,D,E,F on each KPL controls high, med, off, low The 4 buttons on each KPL C, D, E, F controlling the motor on the fanlinc are controllers for 4 scenes, high, med, off, low. Each of the scenes has two controllers (1 button from each KPL) and the other 3 buttons from each KPL are responders Scene 'high' sets button C on each KPL (controllers) to 100% and buttons D, E, and F on each KPL (responders) to 0% and the fan motor to high Scene 'medium' sets button D on each KPL (controllers) to 100% and buttons C, E and F (responders) on each KPL to 0% and the fan motor to medium etc... Each KPL operates the fan speed correctly with only 1 button out of the 4 fan speed buttons illuminated at any one time BUT does not change the corresponding button illumination on the other KPL. E.G. pressing D on KPL 1 results in the fan operating at medium speed and button D on KPL 1 being illuminated but button D on KPL 2 does not illuminate; the "off" button E on KPL 2 just stays illuminated. Am I missing something or is this not possible to do just with scenes and do I need to trigger an ISY program to change the button illumination? thanks Gary