gages97

Ahh, so that is what Span means....

So the notifications overall works very nicely. From the way I understand it, you have to create a network resource option for every condition then trigger than resource ie relay closed send network resource w/ message valve open. I have a bunch of water sensors so I have to create an on/off network resource for each and then activate versus with notifications you can just do a send notification and it will put in the body of the email the state of the device.

I figured it out. You create some blanks by adding and setting icon to empty. Then move things around

I got the basics working, TY. When I rearrange the icons I can't seem to have 2 icons in a row, only 3. I want to get to something like the attached. But it will only let me do this

awesome, will review.

In MobileLinc Pro there is a nice feature that allows you to map a status to another word As an example for an IOLink if set to On, show as Closed if set to Off, show as Open Any way to do that w/ UD Mobile?

Any detail on the "Improved Scene Support", on the 994 w/ Zwave Module, scenes are not a thing, see discussion here: Also, will the new board provide the ability to push new firmware to Zwave devices?

Appears that if you want this level of diagnostic capability you need something like this: https://www.zwaveproducts.com/collections/zwaveproducts

Noob question on Zwave paths. ISY w/ PLM and 500 series ZWave board, starting to play w/ Zwave. Added a Zooz Scene controller and a few water sensors (Zooz) all close to the ISY. Added an Aeotec Range Extender 7. Moved a water sensor which is 20 ft above the ISY but 15 feet from the Extender, updated neighbors. All is working fine. My Q is, is there a way to see the path from the water sensor back to the ISY, ie is it going via the Extender or directly to the ISY.

Just added one on Friday - super simple, group the devices, makes it simpler to view. I also add an alert in case battery level gets <20%.

So my take here is that the people responsible for the product feature set of these offerings are not in tune with what the expected requirements of their users are, so the lack of functionality that this group is expecting, is a product management issue not a technical limitation. Example, for my Temple I had to replace their Insteon hub and 4 switches w/ something simple for various non technical users to be able to use. I looked at the new WiFi stuff like Kasa and Leviton. Certain basic concepts are missing, like the ability to schedule a scene for an on and off time (Kasa can not set an off time) or toggle a scene for multiple devices from a single action on a switch or scene controller (neither can do this). I spoke w/ Leviton about it, and it is clear that they don't think about the functionality of their smarthome products the way we are used to. So in the end, my take is this is a product management issue and not a technical limitation issue.

Based on my back and forth with them, seems like they could add an advanced setting, to have the scene buttons act as toggle buttons, ie a toggle mode.

I went back and forth w/ Zooz support. Here is what they came back with: The ZEN32 only sends the trigger to the hub, and then the hub gives you options to finalize the action. The set-up works on the main button since it's the same type of device (the outlet is an on/off device and the main switch button on the ZEN32 is an on/off device). But the small buttons on the ZEN32 are not on/off devices, they are button type devices so they won't behave like on/off device and simply grouping them with on/off devices won't work. You would need to write separate "if/ then" scenarios to control your device with any small button, and another rule to control the LED indicator based on the status of the controlled device so they stay in sync. I then asked about a “special mode” for a toggle approach This is something that the software interface could potentially provide, but it's not how ISY and some other hubs handle central scene. We're restricted by Z-Wave certification on how we can implement the functionality and ISY doesn't give us a way to influence the interface in any way as a manufacturer to make it more intuitive. On SmartThings for example, where we can provide our own handler code, we could decide how the device displays and it offers a simple menu to assign actions to each button straight from the interface. Unfortunately, there isn't a Z-Wave device type that would offer on/off functionality for monitoring only. If we displayed the buttons on the ZEN32 as on/off devices, it would display them as controllable devices, when in fact they cannot be controlled, since there's nothing connected to them. They work just like buttons on a remote control, which serve as a trigger function only. I will pass your feedback on to the Z-Wave developers, so they can perhaps create a new device type for easier programming of physical Z-Wave remote controls. -- So for now we are stuck with if then logic. @slrobins I was able to get programming working for switched on and then long press or double tap for off. Yes you can then set the indicator light status but I didn't bother, I just left it on all the time.

So it would appear that the Zooz behavior is a feature not a bug. The Scene buttons on the unit are just buttons that trigger an action (in an if then else program), their concept of scenes is not the same as what I am used to w/ Insteon. I ended up as follows: Set Scene button led lights on at all times Press 1x to turn on a device or an ISY scene Press 2x or long press to turn off a device or an ISY scene But here's the thing, the big button that controls the attached load, does act exactly like an Insteon device does in a scene, set it as a controller and it will trigger a scene and react to a scene. So I don't think this is a Zwave issue, but how Zooz thinks about things issue.

I am testing the Zen32 and am encountering similar issues, I add the scene 1 button and a 2634 (Insteon Outdoor module) both as controllers. Scene 1 button on the Zen32 will turn the scene on but not off. What I was able to do was a program that uses double tap for off so, if switched fast on then turn off insteon device(s) I opened a ticket w/ zooz

Funny, I just discovered these also http://www.wago.us/products/terminal-blocks-and-connectors/installation-connectors/compact-splicing-connectors-for-all-conductor-types-221-series/overview/ Makes life so much easier

I have a 994i with 20+ switches, outlets, keypads, mini remotes and some older X10 stuff. My setup works perfectly no issues with communications. I ran a variety of scene tests yesterday and saw what appears to be errors. How does one interpret these logs? Sun 07/30/2017 08:27:11 PM : [GRP-RX ] 02 61 13 13 00 06 Sun 07/30/2017 08:27:12 PM : [iNST-SRX ] 02 50 34.E2.F3 3D.95.7B 65 13 13 LTOFFRR(13) Sun 07/30/2017 08:27:12 PM : [std-Cleanup Ack] 34.E2.F3-->ISY/PLM Group=0, Max Hops=1, Hops Left=1 <html><font color="red">----- Front Outside Lights Test Results -----</font></html> <html><font color="red">[succeeded]</font> Outside Lights (34 E2 F3 1)</html> <html><font color="red">[Failed]</font> Front Outside Lights Switch (3E 42 3B 1)</html> <html><font color="red">----- Front Outside Lights Test Results -----</font></html> Sun 07/30/2017 08:27:21 PM : [iNST-TX-I1 ] 02 62 32 16 0B 0F 0D 00 Sun 07/30/2017 08:27:21 PM : [iNST-ACK ] 02 62 32.16.0B 0F 0D 00 06 (00) Sun 07/30/2017 08:27:30 PM : [iNST-TX-I1 ] 02 62 32 16 0B 0F 0D 00 Sun 07/30/2017 08:27:30 PM : [iNST-ACK ] 02 62 32.16.0B 0F 0D 00 06 (00) Sun 07/30/2017 08:27:34 PM : [3E CF 71 1 ] Link 4 : 0FD8 [E202281EF5010002] Writing [E202281EF5010002] Sun 07/30/2017 08:27:34 PM : [iNST-TX-I2CS] 02 62 3E CF 71 1F 2F 00 00 02 0F DF 08 E2 02 28 1E F5 01 00 02 B7 Sun 07/30/2017 08:27:34 PM : [iNST-ACK ] 02 62 3E.CF.71 1F 2F 00 00 02 0F DF 08 E2 02 28 1E F5 01 00 02 B7 06 (00) Sun 07/30/2017 08:27:43 PM : [iNST-TX-I2CS] 02 62 3E CF 71 1F 2F 00 00 02 0F DF 08 E2 02 28 1E F5 01 00 02 B7 Sun 07/30/2017 08:27:43 PM : [iNST-ACK ] 02 62 3E.CF.71 1F 2F 00 00 02 0F DF 08 E2 02 28 1E F5 01 00 02 B7 06 (00) Sun 07/30/2017 08:27:52 PM : [iNST-TX-I2CS] 02 62 3E CF 71 1F 2F 00 00 02 0F DF 08 E2 02 28 1E F5 01 00 02 B7 Sun 07/30/2017 08:27:52 PM : [iNST-ACK ] 02 62 3E.CF.71 1F 2F 00 00 02 0F DF 08 E2 02 28 1E F5 01 00 02 B7 06 (00) Sun 07/30/2017 08:27:56 PM : [3E CF 71 1 ] Link 4 : 0FD8 [E202281EF5010002] *Failed Writing [E202281EF5010002] Sun 07/30/2017 08:27:56 PM : [3E F8 55 1 ] Link 4 : 0FD8 [E2014272DB010001] Writing [E2014272DB010001] Sun 07/30/2017 08:27:56 PM : [iNST-TX-I2CS] 02 62 3E F8 55 1F 2F 00 00 02 0F DF 08 E2 01 42 72 DB 01 00 01 65 Sun 07/30/2017 08:27:56 PM : [iNST-ACK ] 02 62 3E.F8.55 1F 2F 00 00 02 0F DF 08 E2 01 42 72 DB 01 00 01 65 06 (00) Sun 07/30/2017 08:28:05 PM : [iNST-TX-I2CS] 02 62 3E F8 55 1F 2F 00 00 02 0F DF 08 E2 01 42 72 DB 01 00 01 65 Sun 07/30/2017 08:28:05 PM : [iNST-ACK ] 02 62 3E.F8.55 1F 2F 00 00 02 0F DF 08 E2 01 42 72 DB 01 00 01 65 06 (00) Sun 07/30/2017 08:28:14 PM : [iNST-TX-I2CS] 02 62 3E F8 55 1F 2F 00 00 02 0F DF 08 E2 01 42 72 DB 01 00 01 65 Sun 07/30/2017 08:28:14 PM : [iNST-ACK ] 02 62 3E.F8.55 1F 2F 00 00 02 0F DF 08 E2 01 42 72 DB 01 00 01 65 06 (00) Sun 07/30/2017 08:28:18 PM : [3E F8 55 1 ] Link 4 : 0FD8 [E2014272DB010001] *Failed Writing [E2014272DB010001]

Yup, no load connected to my setup, a straight 6 scene controller would be / should be cheaper.

Set the scene up the way Lee indicated. Works great. You guys are awesome. Wish they would make a version of this switch that didn't control a load, was just a scene controller.

Nice.... OK, let me get this wired in, then will give it a try later.

OK Installed the 2487, come up as expected. For all buttons I set the non toggle to On and set the A..D buttons to be mutually exclusive. This code works fine Den Preset HT - [iD 0005][Parent 000C] If X10 'F2/On (3)' is Received Or X10 'F2' is Received Or Control 'Den 1 - On Off / Den 1 - A' is switched On Then Wait 1 second Send X10 'D4' Send X10 'K/Preset Dim (4)' Send X10 'C1/Off (11)' Send X10 'D1/Off (11)' Else - No Actions - (To add one, press 'Action') Questions: 1. When I press the Off button I want to have the A..D buttons to be set to off (cosmetic only code works fine). 2. I am going to add a 2nd 2487s to the system, when I press Off on the 2nd switch I want A..D on Switch 1 and A..D on Switch 2 to be set to off

This code works as I have some of the older PCS Scenemaster controllers which support this command set. My X10 setup is pretty solid once I finally added the ACT CR234. Right now I am in a mixed Insteon / X10 state which was working well until I moved the one circuit. As a test I put an ApplianceLinc on the same circuit and it is solid, so I figure going w/ the Insteon KeyPadLinc is the way to go.

Non dimmer model. On is fine, as I can set the dim level in the Then section of the program

The XPTs were working fine until I moved the circuit onto my generator panel and now the X10 signal is weak so I am hoping Insteon signal will be the way to go. 2487s is on the way. From this thread it appears that each button will appear as a Control and I can use in the If statement. http://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-26_INSTEON:Linking_a_KeypadLinc I think non toggle and all mutually exclusive should work for what I am doing. "Control 'KPL Test 3 - C' is switched On" - Are there other options than "switched on" or "switched off" I don't see anything in the dox.

Looking to upgrade some of my X10 controllers (in this case XPTs) to Insteon. My devices are still mostly X10. In this case 3 circuits on X10 dimmers that I want to set when I push a button on the 2487s. I am also using an older IR to X10 transmitter so I can set the lights from my home theater remote. This is my current program. How do I add a button on the 2487s to trigger? I don't believe that I can use scenes with X10 devices. When I add the 2487s as a controller will the buttons show up and be able to be used in the If, eg If button A is pushed? Den Preset HT - [iD 0005][Parent 000C] If X10 'F2/On (3)' is Received Or X10 'F2' is Received Then Wait 1 second Send X10 'D4' Send X10 'K/Preset Dim (4)' Send X10 'C1/Off (11)' Send X10 'D1/Off (11)' Else - No Actions - (To add one, press 'Action')