Silversop

Hi all, is there a way to have both the ISY portal module and the mobilinc portal module working? ​I purchased the ISY portal to be able to remote access from my PC when I am away... I use the mobilinc app on my home tablets ... Once I installed the ISY portal mod. it removed the mobilinc. Please advise. ​Regards, S

Thanks Lee and Paul... it does turn out it was the relay follows input checkbox... Been pulling my hair out and it turns out it's a freakin check box that causes that .. Thanks!

As well as my above posts.. one more odd thing .. When I open the garage door and it gets to the top my sensors come together... As soon as they do, the door closes automatically... What the hell is screwed up Here are the Level 3 logs from the event. ​ Sat 02/06/2016 08:44:32 : [iNST-TX-I1 ] 02 62 3D 51 45 0F 11 02 Sat 02/06/2016 08:44:32 : [iNST-ACK ] 02 62 3D.51.45 0F 11 02 06 LTONRR (02) Sat 02/06/2016 08:44:33 : [iNST-SRX ] 02 50 3D.51.45 2A.1C.D7 2B 11 02 LTONRR (02) Sat 02/06/2016 08:44:33 : [std-Direct Ack] 3D.51.45-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 02/06/2016 08:44:33 : [D2D EVENT ] Event [3D 51 45 2] [sT] [255] uom=0 prec=-1 Sat 02/06/2016 08:44:33 : [ 3D 51 45 2] ST 255 Sat 02/06/2016 08:44:46 : [iNST-SRX ] 02 50 3D.51.45 00.00.01 CB 11 00 LTONRR (00) Sat 02/06/2016 08:44:46 : [std-Group ] 3D.51.45-->Group=1, Max Hops=3, Hops Left=2 Sat 02/06/2016 08:44:46 : [D2D EVENT ] Event [3D 51 45 1] [DON] [0] uom=0 prec=-1 Sat 02/06/2016 08:44:46 : [ 3D 51 45 1] DON 0 Sat 02/06/2016 08:44:46 : [D2D EVENT ] Event [3D 51 45 1] [sT] [255] uom=0 prec=-1 Sat 02/06/2016 08:44:46 : [ 3D 51 45 1] ST 255 Sat 02/06/2016 08:44:46 : [D2D-CMP 0002] STS [3D 51 45 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Sat 02/06/2016 08:44:47 : [iNST-SRX ] 02 50 3D.51.45 2A.1C.D7 41 11 01 LTONRR (01) Sat 02/06/2016 08:44:47 : [std-Cleanup ] 3D.51.45-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Sat 02/06/2016 08:44:47 : [iNST-DUP ] Previous message ignored. Sat 02/06/2016 08:44:47 : [iNST-SRX ] 02 50 3D.51.45 11.01.01 CB 06 00 (00) Sat 02/06/2016 08:44:47 : [std-Group ] 3D.51.45-->11.01.01, Max Hops=3, Hops Left=2 Sat 02/06/2016 08:44:47 : [iNST-INFO ] Previous message ignored. Sat 02/06/2016 08:44:47 : [iNST-SRX ] 02 50 3D.51.45 00.00.01 CB 13 00 LTOFFRR(00) Sat 02/06/2016 08:44:47 : [std-Group ] 3D.51.45-->Group=1, Max Hops=3, Hops Left=2 Sat 02/06/2016 08:44:47 : [D2D EVENT ] Event [3D 51 45 1] [DOF] [0] uom=0 prec=-1 Sat 02/06/2016 08:44:47 : [ 3D 51 45 1] DOF 0 Sat 02/06/2016 08:44:47 : [D2D EVENT ] Event [3D 51 45 1] [sT] [0] uom=0 prec=-1 Sat 02/06/2016 08:44:47 : [ 3D 51 45 1] ST 0 Sat 02/06/2016 08:44:47 : [D2D-CMP 0002] STS [3D 51 45 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> false Sat 02/06/2016 08:44:47 : [D2D EVENT ] Event [3D 51 45 2] [sT] [0] uom=0 prec=-1 Sat 02/06/2016 08:44:47 : [ 3D 51 45 2] ST 0 Sat 02/06/2016 08:44:47 : [iNST-SRX ] 02 50 3D.51.45 2A.1C.D7 41 13 01 LTOFFRR(01) Sat 02/06/2016 08:44:47 : [std-Cleanup ] 3D.51.45-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Sat 02/06/2016 08:44:47 : [iNST-DUP ] Previous message ignored. Sat 02/06/2016 08:44:47 : [iNST-SRX ] 02 50 3D.51.45 13.01.01 CB 06 00 (00) Sat 02/06/2016 08:44:47 : [std-Group ] 3D.51.45-->13.01.01, Max Hops=3, Hops Left=2 Sat 02/06/2016 08:44:47 : [iNST-INFO ] Previous message ignored.

Oberkc, Let me ask this though... When I close the garage door, It's almost like I need to run a query to ensure the state of the device is accurate. right?

Garage Door - [iD 0002][Parent 0001] If Status 'Garage_Door_Sensor' is On Then Wait 1 minute Send Notification to 'All' content 'Garage Door Notification' $Garage_Left_Open = 1 Else - No Actions - (To add one, press 'Action')

Hi Everyone, I am really new at all of this and have some questions based on all of the discussion and also my setup... I installed an IO Linc as follows... I only have the IO Linc and not a button opener. I use the normal ones of the garage. I setup the Sensors "backward" in that... When the door is open the sensors are together (ON) and when the door is down.. the sesors are apart (Off)... I had the momentary A setup without a trigger revers for the sensors... It seems now, all of the functions are working as expected but if someone sees something out of wack with my setup let me know... Second part of this is the notifications... I want the door to notify me when open for longer than X... I open the door and close it within 30 seconds of opening it... I have X = 1 min for testing purposes. Even if the door is closed within 30 seconds.. it triggers an alert. I look at the iSY and it still shows "on" even though the door is closed... It's almost like I need a continuous query after the trigger? ​Can someone give me some examples on the proper way to do a notification in this situation? How do I almost a constant query of the door while open to ensure that it really is open or closed. Regards, S

I guess I worded it wrong stusviews, I meant other comments/opinions to the matter... I will do more research as well. Thanks for your help

Thanks for the reply. I have another question out there http://forum.universal-devices.com/topic/17902-isyz-wave-compatibility/?p=163701 that I wonder if you can give your 2 cents on Paul... I did receive one reply but looking for a little more detail than was provided. Regards, S

From a new guy in this space... Let me see if I can sum up the 2 pages of discussion covering 2 years... Hub and ISY do not play well together There is no need to have an ISY and a Hub together ISY is preferred if you want the detailed control The UI for Mobilink sucks There are no viable alternatives to Mobilink unless you want to code one yourself… Is that accurate?