
Moshe
Members-
Posts
207 -
Joined
-
Last visited
Everything posted by Moshe
-
LeeG / Oberkc - After replacing the PLM, everything is working perfectly. The event viewer now displays data when the G button is pressed on the Keypad, and True / False now shows correctly in summary. Thanks Moshe
-
Thanks LeeG.
-
After I replace the PLM. I know I need to do a "Restore PLM." Do I also need to do a "Restore All Devices". Moshe
-
Thanks. Moshe
-
LeeG - I finally had the chance to restore PLM, and I receive "system in safe mode". What luck. When I receive the new PLM can I still do the restore, or do I need to do something else. Moshe
-
Oberkc - On the circuit I have 3 switchlinks, one is not behaving, it will not turn load off after pressing it. I think it needs to be replaced. I replaced the keypad recently as well. I still have the query program running at 3AM. LeeG - The restore will restore from which file, or does it just reset the PLM. Moshe
-
Oberkc - I have tried plugging the PLM into different circuits, but the results do not change. I see no activity in the event viewer (# 3) at all using this Keypad. I have tried other buttons, on the same Keypad and still do not receive any results in the event viewer (Number 3). So it seems the keypad is the only device giving me communication issues. I have tried other switch links in the same electrical box and all seem to send result to event viewer. What I don't understand is why when I use the keypad I do not see any results in the event viewer, but when I use the device that the keypad controls it shows activity in the event viewer. Moshe
-
The PLM is on a circuit with alot of other computer equipment. I do have to access points confirmed. I have used this setup for years, but never tried adding vacation button on that keypad. Moshe
-
LeeG - After running diagnostics as explained above, the event viewer was blank, when I tried with a different Keypad in another location plenty of data was displayed. Oberkc - When I turn on/off the entry lights manually the admin console does not display the correct status until I query manually. Is there a way I can query the status of the keypad button so program will run correctly. Moshe
-
Oberkc/LeeG/Larryllix - Thanks for your feed back. Here are the results: Folder Conditions for 'Vacation' Add conditions to limit when programs in this folder are allowed to run. If Status 'Entry Lights / 2A.11.10.G' is 100% Then Allow the programs in this folder to run. 1. Keypad button was turned on 2. before the "from time" occurred 3. before the "to time" occurred It worked jus fine. The folder under summary went to true. I tested again: 1. Keypad was button was off 2. before the "from time" occurred 3. before the "to time" occurred Lights turned on/off even though Keypad button was off. Under summary Folder still showed true even though the keypad light was off. Any ideas. Moshe
-
Thanks Oberkc. Yes it is a dimmer. I also tried status "is not off", but it did not seem to work either. Here is how I tested: A ran the "if and then" statement for this program. If From Sunset + 1 hour and 15 minutes To 11:20:00PM (same day) Then Set Scene 'KPL Hall / Entry Lights' On Else Set Scene 'KPL Hall / Entry Lights' Off Lights never turned on. I also just tried this but received the same results. If From 10:59:00PM To 11:20:00PM (same day) Then Set Scene 'KPL Hall / Entry Lights' On Else Set Scene 'KPL Hall / Entry Lights' Off Moshe
-
I am trying to configure a button on a Keypad for vacation on/off for programs to run in a folder. When I select status for the button it shows off, 0-100%, and responding. There is no "on" option. I tried 100% for "on" but the programs would not run. I am using Version: 4.2.5. Any ideas. Moshe
-
I was creating a program that would rely on the status of the module. So if the module status was incorrect the program would not function correctly. Thanks
-
I am using an 2 OutletLink and I am noticing that the status (on/off) is not correctly displayed in the software. The version of the OutletLinks is v.42. The version of the my console is 4.2.2. Does anybody know why the OutletLinks do not show the correct status.
-
Lee - Sorry. I thought I did delete it, I will try again. What is the correct method for deleting a post.
-
Has the issue with devices showing 100% instead of On, been corrected. My devices still show 100%. Thanks
-
Michel - Thanks.
-
How do you configure encryption to SSL for the e-mail/notifications. Thanks
-
Upgraded just fine.
-
Lee - Cleared java cache. Seems to be working now. Thanks
-
Lee - Thanks. I skimmed right over that. However I still cannot access via IP/admin. This method works: http://www.universal-devices.com/99i/3.3.2/admin.jnlp Moshe
-
Installed 3.3.2 from 3.3.1. Now I am unable to gain acess to admin console via isy/admin. Need to use ip/ admin. Any ideas.
-
Upgraded to 3.2.6. Everything seems to be working perfectly.
-
Installed with no issues.
-
Installed from 3.1.17 - no problems here.