islandguy642

Update: It's fairly possible that the majority of problems I'm encountering are because the electrical system I'm working with here is three phase while home is single phase. I'm not too well versed in the electrical side as yet but this is progress.

I'm going to abandon the motion sensor install until I can test the electrical side of things or get 2443 access point. Until then thanks for the replies.

Okay..so it must be something wrong with that network configuration because the same motion sensor added at home. Tue 10/25/2016 08:02:03 AM : [37 9d 72 ] Added to list of devices to link to ISY Tue 10/25/2016 08:02:03 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 0D 00 Tue 10/25/2016 08:02:03 AM : [iNST-ACK ] 02 62 37.9D.72 0F 0D 00 06 (00) Tue 10/25/2016 08:02:12 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 0D 00 Tue 10/25/2016 08:02:12 AM : [iNST-ACK ] 02 62 37.9D.72 0F 0D 00 06 (00) Tue 10/25/2016 08:02:13 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 0D 02 (02) Tue 10/25/2016 08:02:13 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:13 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 10 00 Tue 10/25/2016 08:02:13 AM : [iNST-ACK ] 02 62 37.9D.72 0F 10 00 06 ID-REQ (00) Tue 10/25/2016 08:02:21 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 10 00 Tue 10/25/2016 08:02:21 AM : [iNST-ACK ] 02 62 37.9D.72 0F 10 00 06 ID-REQ (00) Tue 10/25/2016 08:02:23 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 23 10 00 ID-REQ (00) Tue 10/25/2016 08:02:23 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Tue 10/25/2016 08:02:23 AM : [iNST-SRX ] 02 50 37.9D.72 10.01.44 8B 02 44 (44) Tue 10/25/2016 08:02:23 AM : [std-Broadcast] 37.9D.72-->10.01.44, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:23 AM : [37 9D 72 0 ] Calibrating engine version Tue 10/25/2016 08:02:23 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 Tue 10/25/2016 08:02:23 AM : [iNST-ACK ] 02 62 00.00.00 00 00 00 15 (00) Tue 10/25/2016 08:02:32 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 Tue 10/25/2016 08:02:32 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 06 (00) Tue 10/25/2016 08:02:33 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:33 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:34 AM : [iNST-ERX ] 02 51 37 9D 72 32 B1 BC 12 2F 00 00 01 0F FF 01 E2 01 2B 50 C9 03 00 00 97 Tue 10/25/2016 08:02:34 AM : [Ext-Direct ] 37.9D.72-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Tue 10/25/2016 08:02:34 AM : [37 9D 72 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0FF8) Tue 10/25/2016 08:02:34 AM : [37 9D 72 1 ] Start : Adding device to ISY Tue 10/25/2016 08:02:34 AM : [37 9D 72 1 ] Finish : Adding device to ISY was Successful Tue 10/25/2016 08:02:34 AM : [37 9D 72 1 ] Link 0 : 0FF8 [E20132B1BC010001] Saving [E20132B1BC010001] Tue 10/25/2016 08:02:34 AM : [37 9D 72 2 ] Start : Adding device to ISY Tue 10/25/2016 08:02:34 AM : [37 9D 72 2 ] Finish : Adding device to ISY was Successful Tue 10/25/2016 08:02:34 AM : [37 9D 72 2 ] Link 1 : 0FF0 [E20232B1BC010002] Saving [E20232B1BC010002] Tue 10/25/2016 08:02:34 AM : [37 9D 72 3 ] Start : Adding device to ISY Tue 10/25/2016 08:02:34 AM : [37 9D 72 3 ] Finish : Adding device to ISY was Successful Tue 10/25/2016 08:02:34 AM : [37 9D 72 3 ] Link 2 : 0FE8 [E20332B1BC010003] Saving [E20332B1BC010003] Tue 10/25/2016 08:02:34 AM : [37 9D 72 0 ] Successfully added device Tue 10/25/2016 08:02:34 AM : [All ] Writing 24 bytes to devices Tue 10/25/2016 08:02:35 AM : [37 9D 72 1 ] Link 0 : 0FF8 [E20132B1BC010001] Writing [E20132B1BC010001] Tue 10/25/2016 08:02:35 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 02 0F FF 08 E2 01 32 B1 BC 01 00 01 35 Tue 10/25/2016 08:02:35 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 02 0F FF 08 E2 01 32 B1 BC 01 00 01 35 06 (00) Tue 10/25/2016 08:02:35 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:35 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:35 AM : [MNG-LNK-RSP ] 02 6F 41 A2 01 37 9D 72 10 01 44 06 Tue 10/25/2016 08:02:35 AM : [PLM ] Group 1 : Writing Responder Link matching [37 9D 72 1 ] Link 0 : 0FF8 [E20132B1BC010001] Tue 10/25/2016 08:02:36 AM : [37 9D 72 1 ] Link 1 : 0FF0 [E20232B1BC010002] Writing [E20232B1BC010002] Tue 10/25/2016 08:02:36 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 02 0F F7 08 E2 02 32 B1 BC 01 00 02 3B Tue 10/25/2016 08:02:36 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 02 0F F7 08 E2 02 32 B1 BC 01 00 02 3B 06 (00) Tue 10/25/2016 08:02:36 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:36 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:37 AM : [MNG-LNK-RSP ] 02 6F 41 A2 02 37 9D 72 10 01 44 06 Tue 10/25/2016 08:02:37 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 23 2F 00 (00) Tue 10/25/2016 08:02:37 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Tue 10/25/2016 08:02:37 AM : [PLM ] Group 2 : Writing Responder Link matching [37 9D 72 1 ] Link 1 : 0FF0 [E20232B1BC010002] Tue 10/25/2016 08:02:37 AM : [37 9D 72 1 ] Link 2 : 0FE8 [E20332B1BC010003] Writing [E20332B1BC010003] Tue 10/25/2016 08:02:37 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 02 0F EF 08 E2 03 32 B1 BC 01 00 03 41 Tue 10/25/2016 08:02:37 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 02 0F EF 08 E2 03 32 B1 BC 01 00 03 41 06 (00) Tue 10/25/2016 08:02:37 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:37 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:38 AM : [MNG-LNK-RSP ] 02 6F 41 A2 03 37 9D 72 10 01 44 06 Tue 10/25/2016 08:02:38 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 23 2F 00 (00) Tue 10/25/2016 08:02:38 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Tue 10/25/2016 08:02:38 AM : [iNST-DUP ] Previous message ignored. Tue 10/25/2016 08:02:38 AM : [PLM ] Group 3 : Writing Responder Link matching [37 9D 72 1 ] Link 2 : 0FE8 [E20332B1BC010003] Tue 10/25/2016 08:02:38 AM : [37 9D 72 1 ] Link 3 : 0FE0 [0000000000000000] Writing [00..............] Tue 10/25/2016 08:02:38 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 02 0F E7 08 00 00 00 00 00 00 00 00 D1 Tue 10/25/2016 08:02:38 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 02 0F E7 08 00 00 00 00 00 00 00 00 D1 06 (00) Tue 10/25/2016 08:02:39 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:39 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:39 AM : [37 9D 72 1 ] Link 4 : 0FD8 : Writing High Water Byte Tue 10/25/2016 08:02:39 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 0F DF 01 00 00 00 00 00 00 00 00 E2 Tue 10/25/2016 08:02:39 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 00 0F DF 01 00 00 00 00 00 00 00 00 E2 06 (00) Tue 10/25/2016 08:02:39 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:39 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/25/2016 08:02:40 AM : [iNST-ERX ] 02 51 37 9D 72 32 B1 BC 12 2F 00 00 01 0F DF 01 00 00 00 00 00 00 00 00 E1 Tue 10/25/2016 08:02:40 AM : [Ext-Direct ] 37.9D.72-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Tue 10/25/2016 08:02:40 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 0F DF 01 00 00 00 00 00 00 00 00 E2 Tue 10/25/2016 08:02:40 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 00 0F DF 01 00 00 00 00 00 00 00 00 E2 06 (00) Tue 10/25/2016 08:02:43 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2F 2F 00 (00) Tue 10/25/2016 08:02:43 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Tue 10/25/2016 08:02:44 AM : [iNST-ERX ] 02 51 37 9D 72 32 B1 BC 12 2F 00 00 01 0F DF 01 00 00 00 00 00 00 00 00 E1 Tue 10/25/2016 08:02:44 AM : [Ext-Direct ] 37.9D.72-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Tue 10/25/2016 08:02:44 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 02 0F DF 08 00 00 00 00 00 00 00 00 D9 Tue 10/25/2016 08:02:44 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 02 0F DF 08 00 00 00 00 00 00 00 00 D9 06 (00) Tue 10/25/2016 08:02:45 AM : [iNST-SRX ] 02 50 37.9D.72 32.B1.BC 2B 2F 00 (00) Tue 10/25/2016 08:02:45 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 It's not like the ISY(at other location) can't see the motion sensor..communication fails. Note I was as far as I could be from the ISY when I tested the same motion sensor home

I believe the hub is using the same carrier wave. I have the same exact setup home and the motion sensor added with no problems. There was an ESR300 WAP in the room where the motion was...

1) Barbados 2) http://www.smarthome.com/insteon-2842-222-wireless-motion-sensor.html 3) 50hz 110v

I'm not using a 2413S PLM..I'm using a hub pro modded to work as a PLM. There are dual band 2477d switches all over.

Sorry for not responding earlier. This is not my first motion sensor install just my first outside of my home network. I don't entirely understand how the motion sensors connect to the ISY. There are no dual-band devices other than the wireless routers(3). Oh I'm still getting reason 9 or reason 3 as an error depending on where i stand.

Hi; After searching the forum without success for a solution to my problem I've decide to make this post. I'm attempting to install a 2842-222 Motion Sensor but I'm getting this error but also the can't determine insteon engine error. Fri 10/21/2016 11:41:15 AM : [37 9D 72 ] Added to list of devices to link to ISY Fri 10/21/2016 11:41:15 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 0D 00 Fri 10/21/2016 11:41:15 AM : [iNST-ACK ] 02 62 37.9D.72 0F 0D 00 06 (00) Fri 10/21/2016 11:41:17 AM : [iNST-SRX ] 02 50 37.9D.72 2B.50.C9 23 0D 02 (02) Fri 10/21/2016 11:41:17 AM : [std-Direct Ack] 37.9D.72-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Fri 10/21/2016 11:41:17 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 10 00 Fri 10/21/2016 11:41:17 AM : [iNST-ACK ] 02 62 37.9D.72 0F 10 00 06 ID-REQ (00) Fri 10/21/2016 11:41:26 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 10 00 Fri 10/21/2016 11:41:26 AM : [iNST-ACK ] 02 62 37.9D.72 0F 10 00 06 ID-REQ (00) Fri 10/21/2016 11:41:35 AM : [iNST-TX-I1 ] 02 62 37 9D 72 0F 10 00 Fri 10/21/2016 11:41:35 AM : [iNST-ACK ] 02 62 37.9D.72 0F 10 00 06 ID-REQ (00) Fri 10/21/2016 11:41:39 AM : [37 9D 72 0 ] Calibrating engine version Fri 10/21/2016 11:41:39 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 Fri 10/21/2016 11:41:39 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 06 (00) Fri 10/21/2016 11:41:48 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 Fri 10/21/2016 11:41:48 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 06 (00) Fri 10/21/2016 11:41:57 AM : [iNST-TX-I2CS] 02 62 37 9D 72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 Fri 10/21/2016 11:41:57 AM : [iNST-ACK ] 02 62 37.9D.72 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 06 (00) Fri 10/21/2016 11:42:01 AM : [37 9D 72 0 ] Failed to add device, reason 9 Fri 10/21/2016 11:42:01 AM : [All ] Writing 0 bytes to devices Could the logical position of my access points be the reason?