bocarob

Just a fyi It looks like when you combine time in the if portion of the program with a var int or state it becomes unstable the var does not seem to be read and the program is true all the time I will forward a example on the road but when i removed the var and replaced it with a device the program worked just fine. Regards Robert

Are you certain that: AlarmState = 0 Bedroom_Chill = 0 Yes.... Also, you mentioned that you call this program. Is it called from another program? I run this both ways another program calls it from a switch control is when on Or it runs just by the motion maybe the motion test should be first rather the var I will switch it and see (control then test) hmmm.... The main issue we have is that we cannot reproduce this behavior and need as much information as possible. I understand that it's quite intermittent and it may not happen all the time but the more information we have, the more the likelihood that we can perhaps figure out what's going on. Robert

well it is not state but the prob is when the program is called and it is a int the test if it is false it reads it as true and runs the then anyway the change of the int is not what is triggering the program the program is called from another program. It seems if the int is nested it does not read correctly and then the then runs no matter what .... I have tried to find a pattern but it changes every so often i run it but if i reboot the isy it runs fine for a while and then it seems to mess up .. Not easy I know I have 15 int declared for the system .... Regards Robert

Hi there and Happy Holidays to you guys. As you can see in the attached file I have many nested programs like the one above and they work fine it is not the time function but the var that seems to have a problem when nested . Regards Robert

From Sunset To 11:00:00PM (same day) I use time as the condition seems to have worked in the past just fine that is not where it fails it is the var that seems to be read wrong.. Thank you Robert

Ok since the update this program ran fine in version 3.1.12 the in version 3.1.13 became flaky and now in 3.1.15 run true then false then true the var alarmstate is set to 2 and the program still runs if i remove the main folder and place the program in the root of the tree it seems to work just fine. Just a fyi it seems if i have nested folders there seems to be a problem. Thank You Robert Folder Conditions for 'Sundown-11' Add conditions to limit when programs in this folder are allowed to run. If From Sunset To 11:00:00PM (same day) Then Allow the programs in this folder to run. If ( $AlarmState is 0 And $Bedroom_Chill is 0 ) And ( Status 'Masterbedroom / MasterBedroom:-Sensor' is On Or Control 'Masterbedroom / MasterBedroom:-Sensor' is switched On ) Then Set Scene 'Scene / Scene:MasterBed-Bright' On Set Scene 'Scene / Scene:KPL-Button-B' On Else - No Actions - (To add one, press 'Action')

I too have been having trouble with programs running when they are not turned on or timed. It seem that in my case the Variable is not being read correctly. Also I have var prob not being read but if i reboot cold boot the unit it seems to have cleared part of the prob but it seems to come back after a few hours I also check if elk is armed and not so i created a var to check the state and isy says not armed when in fact the system is armed. I also see problems in nested folders not running my programs like before the upgrade.I cannot believe that all my programs are not correct as most have been running well for well over a year... Also my notify are not being sent out in a timely fashion they seem to get bottled up and then sent in clumps or not at all..... thank you Robert

ok well i will do a factory rest it does work some times but not all the time i have to click very fast never had to before i have 2 remote links and both are behaving in the same manner..... Thanks Robert

Thu 12/08/2011 11:01:26 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:26 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:26 AM : [ 13 EC 54 1] DON 0 Thu 12/08/2011 11:01:26 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:26 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:26 AM : Duplicate: ignored Thu 12/08/2011 11:01:26 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00): Process Message: failed Thu 12/08/2011 11:01:26 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:27 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:27 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:27 AM : [ 13 EC 54 1] DON 0 Thu 12/08/2011 11:01:27 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:27 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:27 AM : Duplicate: ignored Thu 12/08/2011 11:01:27 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00): Process Message: failed Thu 12/08/2011 11:01:27 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:27 AM : [iNST-SRX ] 02 50 13.EC.54 0C.A8.05 41 11 01 LTONRR (01) Thu 12/08/2011 11:01:27 AM : [standard-Cleanup][13.EC.54-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:33 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:33 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:33 AM : [ 13 EC 54 1] DOF 0 Thu 12/08/2011 11:01:33 AM : [ 13 EC 54 1] ST 0 Thu 12/08/2011 11:01:33 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:33 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:33 AM : Duplicate: ignored Thu 12/08/2011 11:01:33 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00): Process Message: failed Thu 12/08/2011 11:01:33 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:33 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:33 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:33 AM : [ 13 EC 54 1] DOF 0 Thu 12/08/2011 11:01:34 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:34 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:34 AM : Duplicate: ignored Thu 12/08/2011 11:01:34 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00): Process Message: failed Thu 12/08/2011 11:01:34 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:34 AM : [iNST-SRX ] 02 50 13.EC.54 0C.A8.05 41 13 01 LTOFFRR(01) Thu 12/08/2011 11:01:34 AM : [standard-Cleanup][13.EC.54-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:37 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:37 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:37 AM : [ 13 EC 54 1] DOF 0 Thu 12/08/2011 11:01:37 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:37 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:37 AM : Duplicate: ignored Thu 12/08/2011 11:01:37 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00): Process Message: failed Thu 12/08/2011 11:01:37 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:37 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:37 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:37 AM : [ 13 EC 54 1] DOF 0 Thu 12/08/2011 11:01:38 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:38 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:38 AM : Duplicate: ignored Thu 12/08/2011 11:01:38 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00): Process Message: failed Thu 12/08/2011 11:01:38 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:38 AM : [iNST-SRX ] 02 50 13.EC.54 0C.A8.05 41 13 01 LTOFFRR(01) Thu 12/08/2011 11:01:38 AM : [standard-Cleanup][13.EC.54-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:39 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:39 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:39 AM : [ 13 EC 54 1] DON 0 Thu 12/08/2011 11:01:39 AM : [ 13 EC 54 1] ST 255 Thu 12/08/2011 11:01:40 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C3 11 00 LTONRR (00) Thu 12/08/2011 11:01:40 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=0 Thu 12/08/2011 11:01:40 AM : Duplicate: ignored Thu 12/08/2011 11:01:40 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C3 11 00 LTONRR (00): Process Message: failed Thu 12/08/2011 11:01:40 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=0 Thu 12/08/2011 11:01:40 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:40 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:40 AM : [ 13 EC 54 1] DON 0 Thu 12/08/2011 11:01:40 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:40 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:40 AM : Duplicate: ignored Thu 12/08/2011 11:01:40 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00): Process Message: failed Thu 12/08/2011 11:01:40 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:40 AM : [iNST-SRX ] 02 50 13.EC.54 0C.A8.05 41 11 01 LTONRR (01) Thu 12/08/2011 11:01:40 AM : [standard-Cleanup][13.EC.54-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:45 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:45 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:45 AM : [ 13 EC 54 1] DOF 0 Thu 12/08/2011 11:01:45 AM : [ 13 EC 54 1] ST 0 Thu 12/08/2011 11:01:45 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:45 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:45 AM : Duplicate: ignored Thu 12/08/2011 11:01:45 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00): Process Message: failed Thu 12/08/2011 11:01:45 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:45 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:45 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:45 AM : [ 13 EC 54 1] DOF 0 Thu 12/08/2011 11:01:45 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00) Thu 12/08/2011 11:01:45 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:45 AM : Duplicate: ignored Thu 12/08/2011 11:01:45 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 13 00 LTOFFRR(00): Process Message: failed Thu 12/08/2011 11:01:45 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:46 AM : [iNST-SRX ] 02 50 13.EC.54 0C.A8.05 41 13 01 LTOFFRR(01) Thu 12/08/2011 11:01:46 AM : [standard-Cleanup][13.EC.54-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:47 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:47 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:47 AM : [ 13 EC 54 1] DON 0 Thu 12/08/2011 11:01:47 AM : [ 13 EC 54 1] ST 255 Thu 12/08/2011 11:01:47 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:47 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:47 AM : Duplicate: ignored Thu 12/08/2011 11:01:47 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00): Process Message: failed Thu 12/08/2011 11:01:47 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:47 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:47 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:47 AM : [ 13 EC 54 1] DON 0 Thu 12/08/2011 11:01:48 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00) Thu 12/08/2011 11:01:48 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:48 AM : Duplicate: ignored Thu 12/08/2011 11:01:48 AM : [iNST-SRX ] 02 50 13.EC.54 00.00.01 C7 11 00 LTONRR (00): Process Message: failed Thu 12/08/2011 11:01:48 AM : [standard-Group][13.EC.54-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:48 AM : [iNST-SRX ] 02 50 13.EC.54 0C.A8.05 41 11 01 LTONRR (01) Thu 12/08/2011 11:01:48 AM : [standard-Cleanup][13.EC.54-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:58 AM : [iNST-SRX ] 02 50 11.9E.B7 00.00.01 C7 11 01 LTONRR (01) Thu 12/08/2011 11:01:58 AM : [standard-Group][11.9E.B7-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:58 AM : [ 11 9E B7 1] DON 1 Thu 12/08/2011 11:01:58 AM : [iNST-SRX ] 02 50 11.9E.B7 00.00.01 C7 11 01 LTONRR (01) Thu 12/08/2011 11:01:58 AM : [standard-Group][11.9E.B7-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:58 AM : Duplicate: ignored Thu 12/08/2011 11:01:58 AM : [iNST-SRX ] 02 50 11.9E.B7 00.00.01 C7 11 01 LTONRR (01): Process Message: failed Thu 12/08/2011 11:01:58 AM : [standard-Group][11.9E.B7-->Group=1] Max Hops=3, Hops Left=1 Thu 12/08/2011 11:01:58 AM : [iNST-SRX ] 02 50 11.9E.B7 0C.A8.05 41 11 01 LTONRR (01) Thu 12/08/2011 11:01:58 AM : [standard-Cleanup][11.9E.B7-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Thu 12/08/2011 11:01:59 AM : [ 11 9E B7 1] ST 255 Thu 12/08/2011 11:01:59 AM : [iNST-ACK ] 02 62 14.20.AE 0F 11 FF 06 LTONRR (FF) Thu 12/08/2011 11:01:59 AM : [iNST-SRX ] 02 50 14.20.AE 0C.A8.05 2B 11 FF LTONRR (FF) Thu 12/08/2011 11:01:59 AM : [standard-Direct Ack][14.20.AE-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 Thu 12/08/2011 11:01:59 AM : [iNST-ACK ] 02 62 14.AD.5F 0F 11 FF 06 LTONRR (FF) Thu 12/08/2011 11:01:59 AM : [iNST-SRX ] 02 50 14.AD.5F 0C.A8.05 2B 11 FF LTONRR (FF) Thu 12/08/2011 11:01:59 AM : [standard-Direct Ack][14.AD.5F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2

It seems that double click is not reacting every time tried new bat standing closer to the link i have to click very fast and it does not get the command every time i am just changing the value of a var for a test so it is not a device problem single click works every time. So I guess program not triggering is the problem Hope that helps a little bit Robert

I guys in this version fast on and off seems to be not working on my old remote link i have uninstalled and reinstlled a few times on and of are fine...Please look into thank you Robert

Ud you guys are great love the new elk thing! What a great xmas Gift and now i can really drive my wife nuts! Now sonos! Regards Robert

Thank You Michel: Could be so kind to tell me what version I should be requesting and will there be plans to support other versions so i can decide wither to keep the device Thank you regards Robert

Just got a 2411T every time i try to add it it fails Forgot to add on the beta version 3.1.9 node not added - failed restoring device 11-D1-EE-1 -200000/-10 Please advise brand new out of the box.... Thank You Robert

Just a quick fyi it seems this version is much slower to connect with conductor and response time for actions seems slower also if that means anything over https over 4g Regards Robert

As per your request ISY port 500 https:// port 85 http:// Elk port 2601 Regards Robert

Removed elk from ISY seems better but really better when i remove is from the net I do not know what ISY is doing but it seems to clog my router and the elk when i removed ISY form my net all was well and no connection prob at all...to my other devices on my net Hmmm very strange Robert

Well I spoke way to soon first thanks and we are looking forward to the release but as per the hang prob it seems to happen again. I have to cold boot the elk and the isy to clear the hang it does not hang as long as i do not try to connect to isy vis https the min i try https to isy the elk and isy seem to hang that is having 2 connections oopen one to isy and one to elk at the same time both https. I have the isy on port 500 and the elk on 2601 I am at a loss Regards Robert

Thank You elk seems much better and isy thank you waited a long time but worth the wait....Ok one big request until we get elk isy connection can we at least have the arm disarm var so we react on the state of the elk system very basic Regards Robert

EZIO8SA the unit works fine under 2.7.15 I did try it by program and by manual control and did a refresh it just did not respond under 2.8.1 no matter what I did I was hoping it was just the console but it seems to be more than that . I do not a have a log but will work on it after I have guests for the next 2 weeks so after they leave I will look into it further maybe anew beta by then...Thank you for your offer to help.... Thanks Robert

Hi there I updated to the new 2.8.1 and everything looked great but then tried to turn on hot water heater with my ez io and nothing on off no response tried restring the device nothing. Then I down graded back to the 2.7.15 release and vavoom everything is back to the old working self