binaryman Posted April 16, 2013 Share Posted April 16, 2013 So I have two issues.. for the first, I updated to the newest stable version 3.31? going into the admin console, I see my 8 button keypad is missing a button, and that button has dropped from the scenes it was in (was used for the garage door). I decided to try to update to the 4.03 beta, and it's still missing.. any ideas? Also, during this upgrading I tried to do a backup. It always fails with file /conf/2 (I think it's supposed to be /conf/2.und?). I read on another post for different file to telnet in and run rf command on this file, but it errors out as well. Ideas? Link to comment
Michel Kohanim Posted April 16, 2013 Share Posted April 16, 2013 binaryman, If it's 2.und, that might explain why a button is missing. This said, it's quite unlikely that something like this would happen on its own unless you have a corrupt file system/SD Card. If you have a good backup, the first thing I recommend is restoring your backup. With kind regards, Michel Link to comment
binaryman Posted April 16, 2013 Author Share Posted April 16, 2013 I've only upgraded this new isy twice and never gotten into the file system. Don't remember seeing this error before. It was restored from a 99i (to 994i). Any backup I may have that may contain this would be very old, if I could find it, and several versions ago.. Any other options? Suggestions? Link to comment
Michel Kohanim Posted April 16, 2013 Share Posted April 16, 2013 Hi binaryman, The only thing I can recommend is right mouse click and choose | Group Devices. If that does not show the button under the main, then you might have no choice but to remove that KPL and then add it back. With kind regards, Michel Link to comment
binaryman Posted April 16, 2013 Author Share Posted April 16, 2013 Yeah tried that and didn't see it. Will re-adding it replace that file? I see the file there with ls command and says -1 next to it (if that means anything). Link to comment
Michel Kohanim Posted April 16, 2013 Share Posted April 16, 2013 Hi binaryman, Good point. Telnet to ISY and at the command prompt, type: RF /CONF/2.UND Once this is removed, then you can remove the KPL from ISY in Admin Console. With kind regards, Michel Link to comment
binaryman Posted April 16, 2013 Author Share Posted April 16, 2013 2.und does not exist but just 2 does. Is there a command to rename this file? Link to comment
Michel Kohanim Posted April 16, 2013 Share Posted April 16, 2013 Hi binaryman, Please backup your ISY and send it to support@universal-devices.com. With kind regards, Michel Link to comment
binaryman Posted April 16, 2013 Author Share Posted April 16, 2013 Done. Keep in mind it errors with "cannot retrieve file /conf/2" and "cannot create zip". It does however create a .zip which I sent Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.