D Rock Posted July 21, 2013 Share Posted July 21, 2013 I have an exiting Insteon system, with about 7 devices being controlled by an isy99. I havent had any issues for the last 2 years. I recently wired in a Micro On/Off module that works at the point of installation but will not link up with the ISY. I have tried manually linking and auto linking with no luck. Any ideas? Link to comment Share on other sites More sharing options...
Brian H Posted July 21, 2013 Share Posted July 21, 2013 Are you using the last avilable firmware update 3.3.10 for your ISY99i? There is a good chance the 2443-222 support was added to a later revision firmware that is for the ISY994i only. Due to limitations to the firmware storage space in the ISY99i. Link to comment Share on other sites More sharing options...
LeeG Posted July 22, 2013 Share Posted July 22, 2013 What is the error? Can you post a trace from the Event Viewer at LEVEL 3? Link to comment Share on other sites More sharing options...
D Rock Posted July 22, 2013 Author Share Posted July 22, 2013 Yeah the firmware is indeed 3.3.10. I backed up and re-installed the firmware again. Still no luck. My access points wont even link up and say they are now unsupporeted devices. I have two 2443 Acces Points. Sun 2013/07/21 03:30:55 PM System -170001 [uDSockets] HTTP:28 error:6 Sun 2013/07/21 03:31:55 PM System -170001 [uDSockets] HTTP:28 error:6 Sun 2013/07/21 09:30:42 PM System -5 Start Sun 2013/07/21 09:30:43 PM System -110022 /CONF/INSTENG.OPT Sun 2013/07/21 09:30:43 PM System -110012 /CONF/INSTENG.OPT Link to comment Share on other sites More sharing options...
D Rock Posted July 22, 2013 Author Share Posted July 22, 2013 Sorre heres Level 3: Sun 07/21/2013 09:43:10 PM : [1F DB EB ] Added to list of devices to link to ISY Sun 07/21/2013 09:43:32 PM : [1F DB EB 0 ] Failed to add device Sun 07/21/2013 09:44:13 PM : [1A 72 5B ] Added to list of devices to link to ISY Sun 07/21/2013 09:44:13 PM : [1A 72 5B 0 ] May not fully support i2, reverting to i1 Sun 07/21/2013 09:44:13 PM : [1A 72 5B 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) Sun 07/21/2013 09:44:14 PM : [1A 72 5B 0 ] Failed to add device Sun 07/21/2013 09:44:43 PM : [1A 75 72 ] Added to list of devices to link to ISY Sun 07/21/2013 09:44:44 PM : [1A 75 72 0 ] May not fully support i2, reverting to i1 Sun 07/21/2013 09:44:44 PM : [1A 75 72 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) Sun 07/21/2013 09:44:44 PM : [1A 75 72 0 ] Failed to add device Sun 07/21/2013 09:44:56 PM : Start Insteon Device Linking Mode Sun 07/21/2013 09:45:07 PM : [1A.72.5B 00] Linked device type=00.0B fw=98 Sun 07/21/2013 09:45:07 PM : [1A 72 5B 0 ] Added to list of devices to link to ISY Sun 07/21/2013 09:45:23 PM : Stop Insteon Device Linking Mode, Final processing to follow Sun 07/21/2013 09:45:29 PM : [1A 72 5B 0 ] May not fully support i2, reverting to i1 Sun 07/21/2013 09:45:29 PM : [1A 72 5B 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) Sun 07/21/2013 09:45:29 PM : [1A 72 5B 0 ] Failed to add device Sun 07/21/2013 09:46:41 PM : [1A 72 5B ] Added to list of devices to link to ISY Sun 07/21/2013 09:46:42 PM : [1A 72 5B 0 ] May not fully support i2, reverting to i1 Sun 07/21/2013 09:46:42 PM : [1A 72 5B 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) Sun 07/21/2013 09:46:42 PM : [1A 72 5B 0 ] Failed to add device Link to comment Share on other sites More sharing options...
LeeG Posted July 22, 2013 Share Posted July 22, 2013 Access Points are not added to the ISY. They have no configuration, no links. Thanks for the event trace. Unfortunately it is not at LEVEL 3. Link to comment Share on other sites More sharing options...
D Rock Posted July 22, 2013 Author Share Posted July 22, 2013 Please excuse my mistaken commenst on the Access points since they dont link to the isy99. Link to comment Share on other sites More sharing options...
D Rock Posted July 22, 2013 Author Share Posted July 22, 2013 Im wondering at this point if the isy99 is just not compatible with the 2443-222. Is there any way to load a firmware that would recognize this module? Link to comment Share on other sites More sharing options...
Michel Kohanim Posted July 22, 2013 Share Posted July 22, 2013 Hi D Rock, ISY is compatible with this module as long as you have 3.3.10. I suspect the device is reporting a different cat/subcat that ISY does not know about. Do you have more of these devices? Can you go to Help | About and ensure that your firmware is 3.3.10? With kind regards, Michel Link to comment Share on other sites More sharing options...
D Rock Posted July 22, 2013 Author Share Posted July 22, 2013 This is the only Micro switch I have. Firmware shows 3.3.10 on Help/About tab Link to comment Share on other sites More sharing options...
Michel Kohanim Posted July 23, 2013 Share Posted July 23, 2013 Hi D Rock, Do you have an ISY99i AND more than 254 nodes in the navigation/device tree to your left? With kind regards, Michel Link to comment Share on other sites More sharing options...
D Rock Posted July 24, 2013 Author Share Posted July 24, 2013 Michel, I do indeed have an isy99i/IR. I only have 7 Insteon devices linked with my isy. Hope that answers the questions. Thanks Link to comment Share on other sites More sharing options...
Michel Kohanim Posted July 24, 2013 Share Posted July 24, 2013 Hi D Rock, Thanks so very much and, yes, you have answered my question. At this time, I think it would be best to contact our tech support (links below) so that we can help you more efficiently. With kind regards, Michel Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.