SpaceCowboy Posted May 25, 2008 Posted May 25, 2008 Question: I think if I understood this right is if I 'start linking' with an Insteon device that has links to the rest of the network, that the ISY should crawl those links and build a device table - is that right? Will it crawl device to device if it finds a link? I used Powerhome in the past to setup and manage my linking. I'm not getting that behaviour competely. I had a 3way setup and pointed to one switch and it found the scene and other partner switch. But I know all my switches are linked back to my PLC (and controlinc) but it doesn't seem to find anything. The discovery dialog runs for about 5 minutes. Is there anything I can check? Change? Turn up logging somehow? What for? I've also tried to add a device manually, the controlinc, but it won't add it. I'm using FW 2.6.4, Java 1.6 update 5 (build 1.6.0_05-b13), and disabled web protection on my PC-cillan software. All other functions seem to be working for me.
SpaceCowboy Posted May 25, 2008 Author Posted May 25, 2008 Here's a snap of the log (level 2) when I try to add a device: 2008/05/25 09:37:12 : ---- Initializing the linked devices ---- 2008/05/25 09:37:12 : ---- Add remaining devices ---- 2008/05/25 09:37:13 : [ 6 82 E 1] Reading all links 2008/05/25 09:37:29 : [ 6 82 E 1] Adding device to ISY 2008/05/25 09:37:53 : LINK:6 82 E 1 : 0FF8 : 0 : Adding device 00D16300 2008/05/25 09:37:53 : LINK:6 82 E 1 : 0FF0 : 1 : Adding device 502F600 2008/05/25 09:37:53 : [ 6 82 E 1] Finding linked devices 2008/05/25 09:37:53 : [ 6 82 E 1] Node added to ISY 2008/05/25 09:37:54 : [ 0 D1 63 1] Reading all links 2008/05/25 09:38:03 : [ 0 D1 63 1] Adding device to ISY 2008/05/25 09:38:26 : [ 0 D1 63 1] ** Not Added ** Restore node Failed 2008/05/25 09:38:26 : [ 5 2 F6 1] Reading all links 2008/05/25 09:38:50 : [ 5 2 F6 1] Adding device to ISY 2008/05/25 09:39:14 : [ 5 2 F6 1] ** Not Added ** Restore node Failed 2008/05/25 09:39:14 : ---- All Remaining Device Added ---- 2008/05/25 09:39:14 : ---- Start: Generate Scenes from links ---- 2008/05/25 09:39:14 : ---- End: Generate Scenes from links ---- What does ** Not Added ** mean?
SpaceCowboy Posted May 25, 2008 Author Posted May 25, 2008 Here I added another device and it sees the links but doesn't look like it crawls them or adds them. 2008/05/25 09:44:19 : ---- Initializing the linked devices ---- 2008/05/25 09:44:19 : ---- Add remaining devices ---- 2008/05/25 09:44:19 : [ 6 F9 C7 1] Reading all links 2008/05/25 09:44:52 : [ 6 F9 C7 1] Adding device to ISY 2008/05/25 09:45:08 : [ Time] 09:45:12 1(0) 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FF8 : 0 : Adding device 00D16300 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FF0 : 1 : Adding device 0069E300 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FE8 : 2 : Adding device 00D16300 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FE0 : 3 : Adding device 0502F600 2008/05/25 09:45:17 : [ 6 F9 C7 1] Finding linked devices 2008/05/25 09:45:18 : [ 6 F9 C7 1] Node added to ISY 2008/05/25 09:45:18 : [ 0 D1 63 1] Reading all links 2008/05/25 09:45:27 : [ 0 D1 63 1] Adding device to ISY 2008/05/25 09:45:51 : [ 0 D1 63 1] ** Not Added ** Restore node Failed 2008/05/25 09:45:51 : [ 0 69 E3 1] Reading all links 2008/05/25 09:50:47 : [ 0 69 E3 1] Adding device to ISY 2008/05/25 09:51:09 : [ 0 69 E3 1] ** Not Added ** Restore node Failed 2008/05/25 09:51:10 : [ 5 2 F6 1] Reading all links 2008/05/25 09:51:34 : [ 5 2 F6 1] Adding device to ISY 2008/05/25 09:51:58 : [ 5 2 F6 1] ** Not Added ** Restore node Failed 2008/05/25 09:51:58 : ---- All Remaining Device Added ---- 2008/05/25 09:51:58 : ---- Start: Generate Scenes from links ---- 2008/05/25 09:51:58 : ---- End: Generate Scenes from links ----
Michel Kohanim Posted May 25, 2008 Posted May 25, 2008 Hello SpaceCowboy, Apologies for the problems you are experiencing. C7 1] Node added to ISY 2008/05/25 09:45:18 : ve 2.6.4, you can use Tools->Event Viewer to see the same messages and thus no longer do you need DBG 2. From what I see here, the problem is that ISY cannot crawl the devices linked to 6.F9.C7. Usually, in these cases, the problem could be caused by the following: 1. Signal does not get from ISY to the linked devices and therefore ISY cannot read their databases (it tries 3 times configurable in the shell) 2. It is an unknown device Would you be kind enough to try adding one of the linked devices instead? If the problem is signal related, you might want to put the PLM next or close to another INSTEON device. Or, maybe the PLM is not on the same phase as the linked devices. With kind regards, Michel Here I added another device and it sees the links but doesn't look like it crawls them or adds them. 2008/05/25 09:44:19 : ---- Initializing the linked devices ---- 2008/05/25 09:44:19 : ---- Add remaining devices ---- 2008/05/25 09:44:19 : [ 6 F9 C7 1] Reading all links 2008/05/25 09:44:52 : [ 6 F9 C7 1] Adding device to ISY 2008/05/25 09:45:08 : [ Time] 09:45:12 1(0) 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FF8 : 0 : Adding device 00D16300 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FF0 : 1 : Adding device 0069E300 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FE8 : 2 : Adding device 00D16300 2008/05/25 09:45:17 : LINK:6 F9 C7 1 : 0FE0 : 3 : Adding device 0502F600 2008/05/25 09:45:17 : [ 6 F9 C7 1] Finding linked devices 2008/05/25 09:45:18 : [ 6 F9 63 1] Reading all links 2008/05/25 09:45:27 : [ 0 D1 63 1] Adding device to ISY 2008/05/25 09:45:51 : [ 0 D1 63 1] ** Not Added ** Restore node Failed 2008/05/25 09:45:51 : [ 0 69 E3 1] Reading all links 2008/05/25 09:50:47 : [ 0 69 E3 1] Adding device to ISY 2008/05/25 09:51:09 : [ 0 69 E3 1] ** Not Added ** Restore node Failed 2008/05/25 09:51:10 : [ 5 2 F6 1] Reading all links 2008/05/25 09:51:34 : [ 5 2 F6 1] Adding device to ISY 2008/05/25 09:51:58 : [ 5 2 F6 1] ** Not Added ** Restore node Failed 2008/05/25 09:51:58 : ---- All Remaining Device Added ---- 2008/05/25 09:51:58 : ---- Start: Generate Scenes from links ---- 2008/05/25 09:51:58 : ---- End: Generate Scenes from links ----
Recommended Posts