RLIKWARTZ Posted March 1, 2014 Posted March 1, 2014 Has anyone seen a problem where arbitrarily a action that seems to be like a all on occurs? It appears randomly and sporadically. Is there anyway that something could be happening in the PLM or maybe this is a device doing this. All devices will come on whether they are disabled or not.
oberkc Posted March 2, 2014 Posted March 2, 2014 I recall reading an occasional question about this, but I don't recall that there was ever a common solution, if any. I don't believe it was a systemic problem with the ISY. I do not recall any posts about any relationship between a device action and ALL ON. Rather, I thought they were more random. Perhaps there was some relationship to power outages and queries, but that is just a guess.
ELA Posted March 2, 2014 Posted March 2, 2014 Hello RLIKWARTZ, I am one that has experienced this as well. I attributed mine to an Electrostatic Discharge upsetting a device in such a way that it sent an erroneous message. LeeG explained in the thread below that a group 255 exists that could cause all devices to respond. Unknown as to why or how the device might formulate to send such a message , whether or not the checksum would be valid, or if the CRC should have prevented it from being acted on. http://forum.universal-devices.com/viewtopic.php?p=73544#p73544
Michel Kohanim Posted March 2, 2014 Posted March 2, 2014 Hello everyone, SmartHome is working on a PLM firmware that will help alleviate some of these issues. With kind regards, Michel
ferdies Posted March 3, 2014 Posted March 3, 2014 Hi, 3 weeks ago, I had to replace my PLM since it was not working (viewtopic.php?f=27&t=13627). However, with the new PLM is now exprience random "ON" for some of my Insteon devices. If there will be new firmware for the PLM, is there a way to upgrade my current PLM which is causing some problems now? Thanks.
Michel Kohanim Posted March 3, 2014 Posted March 3, 2014 Hi ferdies, If the issue is only random devices, then we are not talking about the same problem. If ALL your devices turn on randomly, then yes, you can change the PLM (once available from SmartHome). With kind regards, Michel
Brian H Posted March 3, 2014 Posted March 3, 2014 Smarthome will not let any end user update firmware in anything. It has been that way since I started with Insteon in 2005.
ferdies Posted March 4, 2014 Posted March 4, 2014 Hi ferdies, If the issue is only random devices, then we are not talking about the same problem. If ALL your devices turn on randomly, then yes, you can change the PLM (once available from SmartHome). With kind regards, Michel I have also instances wherein ALL devices turn randomly. The frustrating part was that my garage I/OLinc was also linked to a switchlinc. Thus, turning ON all devices randomly also opened my garage. Everything was so smooth with my old PLM until it gave up.
WayneW Posted March 4, 2014 Posted March 4, 2014 Since I upgraded back in January, I have had ALL ON happen twice. Nothing obviously weird in the ISY log, that I saw. old: ISY-99i, 3.3.10, 2412 PLM new: ISY-994i, 4.1.2, 2413s PLM & power supply
Brian H Posted March 5, 2014 Posted March 5, 2014 What is the PLM's Firmware version? That may assist in finding some answers. It can be found in the Tools, Diagnostics, PLM Info/Status choice.
ferdies Posted March 5, 2014 Posted March 5, 2014 This is now my current setup: ISY FW: v.4.1.2 PLM FW: v9B
WayneW Posted March 5, 2014 Posted March 5, 2014 My version is the same as ferdies, v9B for the PLM. Purchased 12/02/2013 from SH.
gatchel Posted March 5, 2014 Posted March 5, 2014 Smarthome will not let any end user update firmware in anything.It has been that way since I started with Insteon in 2005. Good to see that two things haven't changed much
wdconnors Posted March 11, 2014 Posted March 11, 2014 Just an update on this - I spoke with SH support today and they had no idea about this issue or a pending firmware upgrade. If the devs are aware of the issue/working on firmware, they have not informed support.
Michel Kohanim Posted March 11, 2014 Posted March 11, 2014 Hi wdconnors, Definitely hasn't gotten to support yet. If you wish, please send an email to support@universal-devices.com and we'll hook you up. With kind regards, Michel
wdconnors Posted March 11, 2014 Posted March 11, 2014 Michel, Not sure what you're referring to - I was under the impression this is a firmware update that would require PLM replacement.
dstanley Posted March 11, 2014 Posted March 11, 2014 I have had my first ALL ON event the other day. Every light on and every fan running. It seemed to be triggered with my one garage door opening. My second garage door opened at the same time which was weird and when I came into the house everything was on and running. Logs on ISY did not show anything strange so I feel it was a PLM event that triggered it. Hopefully this won't occur too often. Dwight
Michel Kohanim Posted March 13, 2014 Posted March 13, 2014 Hi Guys, Yes, this requires a PLM replacement. Dwight, please contact our support so that we can hook you up with our contacts at SmartHome. With kind regards, Michel
ferdies Posted March 14, 2014 Posted March 14, 2014 Hi Guys, Yes, this requires a PLM replacement. Dwight, please contact our support so that we can hook you up with our contacts at SmartHome. With kind regards, Michel Hi Michel, You might be able to assist me as well. All ON happened just few minutes ago which also opened my garage. Luckily, I was home and I am hoping, same as Dwight, that it wont occur very often (especially in situation I am not around). Thanks
Michel Kohanim Posted March 14, 2014 Posted March 14, 2014 Hi ferdies, Steve just sent you an email. With kind regards, Michel
ferdies Posted March 14, 2014 Posted March 14, 2014 Hi ferdies, Steve just sent you an email. With kind regards, Michel Thanks, Michel!
wdconnors Posted March 17, 2014 Posted March 17, 2014 I've spoken with support (Steve) a few times, but he really just gave me info on how an all on could happen due to noise. He didn't mention any real fix and said PLM replacement/new PLM firmware is not known. This seems to contradict what Michel has said previously.
dstanley Posted March 18, 2014 Posted March 18, 2014 I put in a request with support. Included my contact information and the post here. Thanks for your help! Dwight
Michel Kohanim Posted March 18, 2014 Posted March 18, 2014 Hi Dwight, thank you. Got it and Steve should get back to you shortly. With kind regards, Michel
dstanley Posted March 18, 2014 Posted March 18, 2014 Got a call from Steve (thanks!) although it seems that it is a very rare set of events in the universe colliding to cause this problem - ha! I am wondering since a garage opening event triggered it for another user as well as me - perhaps there is something to do with 'noise' from the motors that is causing this unlikely event to happen!? I suppose the only way to really know would be to put FilterLincs on the two openers I use and see if there are any strange events happen again (although quite expensive) I did notice a strange thing happen this morning with my opener even with a new SwitchLinc installed last night. The IOLinc and Garage Opener are in the same Duplex Receptacle in the Garage Ceiling (and I have two setups). I have used this setup for quite a while now but only lately experienced problems which I thought was a SwitchLinc Timer I had for the garage ceiling light load. This is my SCENE to turn on my Garage Ceiling Lights: New Garage SwitchLinc (Load) - as Controller (replaced SwitchLinc TIMER that I thought was defective.) Foyer KPL8 Button F (LED) - as Controller Bedroom KPL6 Button D (LED) - as Responder only Then I have a program that activates this scene when the Garage IOLinc detects the door(s) opening. This morning when I opened the Garage Door #1 - the total scene came on and functioned properly (Timed to turn off in 5 minutes) Then when I opened garage Door #2 - only the SwitchLinc of the scene turned on - the KPL's did not turn on. I do not understand how only part of a scene can turn on (and only sometimes). So perhaps that is telling me that the Garage Door Opener Motor is indeed a 'noise maker'? Does anyone have an issue like that? These are your basic Chamberlain Openers from Sears. This is my Garage Ceiling Programs: Garage 1 Light Switch If Control 'Garage / Garage Door #1-Sensor' is switched On And Status 'Garage / Garage Lightswitch' is not On Then Run Program 'Garage Light Timer' (Then Path) Else - No Actions - (To add one, press 'Action') SAME AS ABOVE FOR DOOR #2 Garage Light Timer - dual purpose use through program or manual activation If Control 'Foyer / Foyer KPL8 / Foyer KPL8.F' is switched On Or Control 'Garage / Garage Lightswitch' is switched On Then Set Scene 'Garage / Garage Ceiling' On Wait 5 minutes Repeat 3 times Set 'Garage / Garage Lightswitch' 50 (Beep Duration) Wait 1 second Repeat 1 times Wait 15 seconds Set Scene 'Garage / Garage Ceiling' Off Else - No Actions - (To add one, press 'Action') Using this program as a trigger for the scene - how is it possible that the 'load' came on but the KPL's didn't!? Thanks for any help! Dwight
Recommended Posts