ingeborgdot Posted March 19, 2014 Posted March 19, 2014 I have been out of the loop for such a long time now. I have been very busy and have had no real need to go into my isy. I decided today to do a little bit with my isy but I can't get in anymore. I can if I put the ip address but can't do it from my computer like I normally did to get into the admin console. It seems to be a java issue. Can anyone tell me what I need to do? Thanks.
Xathros Posted March 19, 2014 Posted March 19, 2014 See: http://forum.universal-devices.com/viewtopic.php?p=108831#p108831 Hope this helps. -Xathros
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 Here are the instructions it tells me to follow Windows: Open the Windows Control Panel Double click the Java control panel applet. Click the Security tab Click the “Edit Site List…†button. Click the “Add†button and enter the URL for your ISY-99i series controller. Click “OK†and close the Windows Control Panel†But I don't see an edit site list. All I see is manage certificates. And when I go into that it has no add buttons. It has export, import, remove, and details. I don't know for sure now.
Xathros Posted March 19, 2014 Posted March 19, 2014 OK. We should probably start with an update to the latest Java 1.7.51 from Java.com Then, follow those directions to add the ISY to the exception list. Then: Goto http://your.isy.ip.address/admin/admin.jnlp and save the resulting download to your downloads folder. Go to your downloads folder and double click the admin.jnlp file that you just downloaded. This will recreate the desktop shortcut. Double click the desktop Admin icon. -Xathros
Xathros Posted March 19, 2014 Posted March 19, 2014 Good. See additional info in my previous post. -Xathros
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 It still does not work. What do I do now? I put in the ip address of the isy. Is there something I am missing? Oops, missed post above. I will look at it and get back to you.
Xathros Posted March 19, 2014 Posted March 19, 2014 Did you substitute your isy's ip address for the beginning of that link? -Xathros
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 I got the url to work finally. I must have put it in wrong in java.
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 Did you substitute your isy's ip address for the beginning of that link? -Xathros Yes, and it says unable to launch the application after I went through that.
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 I can get in through my bookmarks but not through the shortcut if that makes sense. I will hopefully figure it out.
Xathros Posted March 19, 2014 Posted March 19, 2014 Try adding http://your.isy.ip.address/admin and http://your.isy.ip.address/admin/admin.jnlp to the java exception list as well. -Xathros
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 I can get my shortcuts to work only if I go into java and move the dial down to medium. Is that safe and if not, what am I doing wrong? Thanks.
Xathros Posted March 19, 2014 Posted March 19, 2014 Not sure what the block is. I have access to my Admin with just the URL for the isy in the exception list and the slider set to the center setting. Are you getting an error message? what exactly happens when you double click the Admin icon on your desktop? What Windows version? -Xathros
Xathros Posted March 19, 2014 Posted March 19, 2014 Is the location shown the same as what you entered in the Exception list? Try clearing the java cache (including applications) then go to the security tab in the java control panel, click manage certificates and remove any listed from Universal devices. Then start again by double clicking the admin.jnlp file in your downloads to create a new desktop icon. Accept any certificate prompts along the way. -Xathros
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 I figured it out. I just had to go in and put in the exceptions that were listed in the location. I had it for the bookmark location but every location I guess has to have an exception. Thanks so much for getting me where I needed to be.
ingeborgdot Posted March 19, 2014 Author Posted March 19, 2014 Can I ask one more thing? My isy just does not seem to keep time. What is the best server to use or what do you do to keep time properly. It is over 2 hours behind. Thanks.
Xathros Posted March 19, 2014 Posted March 19, 2014 Excellent! Glad you got it going. Works for me. -Xathros
Recommended Posts