BitSmith Posted April 22, 2014 Posted April 22, 2014 Seems the ISY is not quite ready for the Hidden Door Sensor (HDS) yet. Here's a simple workaround: Link the HDS (as a controller) to an unused button on a KPL (as a responder). Then use that button as a controller to whatever you want to do with the ISY! And I've written a few other hopefully helpful routines; http://wiki.universal-devices.com/index ... r:BitSmith Cheers, BitSmith
tandar Posted April 22, 2014 Posted April 22, 2014 I have not had any problem linking or using this sensor. Please elaborate on the issue that are you addressing. Thanks, tandar Sent from my iPad using Tapatalk
BitSmith Posted April 22, 2014 Author Posted April 22, 2014 My first problem is that I had the device address wrong. The labels are so darn small, that even with light I got a B and 8 confused. I verified with a magnifier... So I tried again to add as either automatic or TriggerLinc [10.02] (2421) TriggerLinc I get the error: Unsupported Device:16.17 How are you able to add the device? Thanks.
Brian H Posted April 22, 2014 Posted April 22, 2014 Beta 4.2.1 lists the 2845-222 cat 10, sub cat 11, in its drop down list. Are you seeing it still being reported as a TriggerLinc?
LeeG Posted April 23, 2014 Posted April 23, 2014 Just in case the idea is lost, the cat 16, subcat 17 are decimal numbers. When looking at the New INSTEON Device list that is the same as [10.11] which are hex numbers; 0x10=16 decimal 0x11=17 decimal
BitSmith Posted April 23, 2014 Author Posted April 23, 2014 Good idea, Brian H. I'm kinda slow to check beta versions - especially right before a critical need - but I did and installed v4.2.1. So Click Link Management, Link the sensor, and there it is! Note: Once it's connected, [Options] allows for the LED to be turned off. I don't know how much battery power it will save, but certainly something. Thanks!
Recommended Posts