Insteon Thermostat Feedback

[eyeandy]

Using iRule, I am able to parse the temperature data from the rest/status feedback. However there is no humidity feedback. I did however notice that humidity feedback is available using the rest/nodes/ command, but because I have multiple thermostats, need to use the status command.

 

This is what I get in the status feedback:

 

 

and this is what I with the rest/nodes/ command where the humidity is 41.00%

 

xx xx xx xx

Temp.Humidity- Avery Rm

57363

5.10.13.0

true

0

0

0

xx xx xx xx

E03

 

Is it possible to have the humidity readings displayed on the rest/status feedback?

[Michel Kohanim]

Hi eyeandy,

 

Yes, certainly but not all thermostats support humidity and that's why it was left out of the common feedback.

 

With kind regards,

Michel

[eyeandy]

Is it too much trouble to include the line:

 

 

into the common feedback and have all the data be empty if it is not supported? I don't know if it's too much trouble but it's quite disappointing since the largest reason I bought these thermostats was to get the humidity readings into iRule.

[Michel Kohanim]

Hi eyeandy,

 

Consider it done. Should be available in 4.2.3.

 

With kind regards,

Michel

[eyeandy]

Thanks Michel!!!