pdxcav Posted June 5, 2014 Posted June 5, 2014 I have had 2 IOLinc devices attached to my garage doors. Things worked fine initially & due to focus in other areas, stopped using them with my HA set-up. However, this past weekend I tried to incorporate them into some of my programs & noticed that my ISY i994 Pro does not hear any status changes on either device. However, if I manually query them from the Admin Console or Mobilinc, they correctly report their status. Both relays work perfect...garage doors are going up & down perfectly, every time. Also, in this particular house I haven't run into any communications problems that interfere with Insteon. I have debugged with the Event Viewer (Level 3) & there is no activity when I press the garage button and the door goes up (thus no change in the status). However, as soon as I query the device, I see the activity & the status is correct. I also have visually watched the LED on the side of the IOlinc flash when open/closure occurred. If this were happening with just one device, I would assume the other one flaked out. But, with both of them acting this way, plugged into different circuits, makes me think that I'm missing something. The only options that I have set are LED on TX and Momentary B. Does any one have any suggestions? Thanks in advance! BTW, I'm using 4.2.3 of the ISY software.
LeeG Posted June 5, 2014 Posted June 5, 2014 Suggest running a Restore Device on the I/O Lincs. All the items noted working do not require link records. The reporting of Sensor status change requires a link record in the I/O Linc and the PLM.
pdxcav Posted June 5, 2014 Author Posted June 5, 2014 Suggest running a Restore Device on the I/O Lincs. All the items noted working do not require link records. The reporting of Sensor status change requires a link record in the I/O Linc and the PLM. Lee - thank you so much! That did the trick!
Recommended Posts