You are welcome.

I didn't do a 100% inspection of my 2.1. So it is possible other components may have been used.

They say.. no news is good news?

 

 

Jon...

Not really - no news in this case merely means no news.

 

What I've gathered from the various threads on the "All On" issue is that:

- the new PLM firmware from SmartHome/SmartLabs does NOT necessarily fix the problem.

- the new PLM hardware does NOT necessarily fix the "drop-dead-at-two-year-mark" problem.

- UDI has still not been given access to a supply of PLM chips which which to build their PLM.

 

The above has a measure of speculation, but it's enough to be quite distressing (and make me build out my z-wave devices rather than insteon devices)...

 

Perhaps UDI can drop in on this thread and provide a definitive update?

In this case, no news is sad news.

Not really - no news in this case merely means no news.

 

What I've gathered from the various threads on the "All On" issue is that:

- the new PLM firmware from SmartHome/SmartLabs does NOT necessarily fix the problem.

- the new PLM hardware does NOT necessarily fix the "drop-dead-at-two-year-mark" problem.

- UDI has still not been given access to a supply of PLM chips which which to build their PLM.

 

The above has a measure of speculation, but it's enough to be quite distressing (and make me build out my z-wave devices rather than insteon devices)...

 

Perhaps UDI can drop in on this thread and provide a definitive update?

 

Good review. Spot on