ISY Programing

[nokin]

I have a Insteon scene that includes three keypads (two 2334-2 8 button keypad dimmers and one 2487s keypad relay) controling my garage ceiling lights.  My ISY programing problem is I added a motion sensor 2842-222 to turn the lights off.  No problem turning the lights off.  However,  the individual buttond on the two 8 button keypays do not stay synced. How do I keep all buttond within the scean in sync.  The ISY programing THEN command does not allow me to change the state of the buttons on the 8 button keypads.  It only allows me to adjust the backlighting.

[apostolakisl]

To turn KPL buttons on and off you need to create a scene and put the button in the scene.  Then turn the scene off.

[nokin]

Thanks for the reply.  i am missing somthing!  I have a scene to turn the KLP buttons off.  That is how I have been keeping them Synced   The scene works fine when anyone of the buttons is pushed.  I an ubable or maybe I just don't understand how to turn the scene off usung ISY programing.   

[EricK]

Right click on the program name in the admin console and select copy to clipboard. Post the program, select code and paste in the the Pop up box.

[apostolakisl]

To turn KPL buttons on and off you need to create a scene and put the button in the scene.  Then turn the scene off.

 

If you are only getting an option to change the backlight level, then you are not tuning a scene on/off.

[stusviews]

If

        Status 'button x' is On

 

Then

        Set Scene 'button scene' On

 

Else

        Set Scene 'button scene' Off

[Banichi]

It sounds to me like the motion sensor program's "then" statement is set to control the garage lights device and not set to control the scene. That would be my guess. I don't have any motion sensors to be able to see what conditions are available in the if statement so I can't know exactly what is going on but that's what I'd guess is your problem.

But if you post the code then that would certainly help.

[nokin]

Thanks again for the help.  Everything is working property now.  I needed someone to point me in the right direction and you did.  I was trying to control a device and not the scene.  

[Banichi]

Glad I could be of help.