Scyto Posted February 17, 2015 Posted February 17, 2015 Well what do you know, after trying some 25+ times the whole house power down seems to have got me one step closer. The ISY finally saw the lock on exclude, on include this happened: Mon 02/16/2015 18:03:07 : [uZW-CMD 1 ] Start IncludeMon 02/16/2015 18:03:07 : [ZWAVE-RX ] ACKMon 02/16/2015 18:03:07 : [ZWAVE-RX ] [0107004A0C010000]...Mon 02/16/2015 18:03:07 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:07 : Listening for Z-Wave devices to add to the networkMon 02/16/2015 18:03:34 : [ZWAVE-RX ] [0107004A0C020000]...Mon 02/16/2015 18:03:34 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:35 : Z-Wave device detected, retrieving info 2Mon 02/16/2015 18:03:35 : [ZWAVE-RX ] [010F004A0C031108]...Mon 02/16/2015 18:03:35 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:35 : Z-Wave device detected, retrieving info 3Mon 02/16/2015 18:03:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:47 : Z-Wave device detected, retrieving info 5Mon 02/16/2015 18:03:47 : [ZWAVE-TX ] [0105004A850D38]Mon 02/16/2015 18:03:47 : [ZWAVE-RX ] ACKMon 02/16/2015 18:03:47 : [ZWAVE-RX ] [0107004A0D061100]...Mon 02/16/2015 18:03:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:47 : Adding Z-Wave devices stoppedMon 02/16/2015 18:03:47 : [ZWAVE-TX ] [01030020DC]Mon 02/16/2015 18:03:47 : [ZWAVE-RX ] ACKMon 02/16/2015 18:03:47 : [ZWAVE-RX ] [01080120D34FD282]...Mon 02/16/2015 18:03:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:47 : [ZWAVE-TX ] [01030002FE]Mon 02/16/2015 18:03:47 : [ZWAVE-RX ] ACKMon 02/16/2015 18:03:47 : [ZWAVE-RX ] [0125010205001D3F]...Mon 02/16/2015 18:03:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:47 : [ZWAVE-TX ] [01030005F9]Mon 02/16/2015 18:03:47 : [ZWAVE-RX ] ACKMon 02/16/2015 18:03:47 : [ZWAVE-RX ] [0104010508F7]Mon 02/16/2015 18:03:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:47 : Exchanging data with secure Z-Wave device 17 of type 4.64.3Mon 02/16/2015 18:03:47 : Adding secure Z-Wave deviceMon 02/16/2015 18:03:50 : [ZWAVE-TX ] ...Mon 02/16/2015 18:03:50 : [ZWAVE-RX ] ACKMon 02/16/2015 18:03:50 : [ZWAVE-RX ] [0104011301E8]Mon 02/16/2015 18:03:50 : [ZWAVE-TX ] ACKMon 02/16/2015 18:03:54 : [ZWAVE-RX ] [010500130E01E6]Mon 02/16/2015 18:03:54 : [ZWAVE-TX ] ACKMon 02/16/2015 18:04:00 : [ZWAVE-ADDSECURE] Error 3Mon 02/16/2015 18:04:01 : Failed to include secure Z-Wave device 17 of type 4.64.3
Scyto Posted February 17, 2015 Posted February 17, 2015 ah spoke too soon, now the ISY is deaf again --edit-- I guess my assertion that the ISY is deaf might be wrong, I assume the lock is 0107004A0 ? If so in the state where the exclude / include generates no messages in the ISY console I do see an event log entry. Mon 02/16/2015 18:13:35 : [uZW-CMD 2 ] Start ExcludeMon 02/16/2015 18:13:35 : [ZWAVE-RX ] ACKMon 02/16/2015 18:13:35 : [ZWAVE-RX ] [0107004B03010000]...Mon 02/16/2015 18:13:35 : [ZWAVE-TX ] ACKMon 02/16/2015 18:15:51 : [ZWAVE-TX-NR ] [0105004B0504B0]Mon 02/16/2015 18:15:51 : [uZW-CMD 8 ] Cancel Include/Exclude/LearnMon 02/16/2015 18:15:51 : [ZWAVE-RX ] ACKMon 02/16/2015 18:15:51 : [ZWAVE-RX ] [0107004B04060000]...Mon 02/16/2015 18:15:51 : [ZWAVE-TX ] ACKMon 02/16/2015 18:15:51 : Removing Z-Wave devices stopped
Scyto Posted February 17, 2015 Posted February 17, 2015 Ok, I pulled the power on my jasco switch near the lock , my 3 aeon labs power strips / switches, this now gets me the include error reliably. Will keep you posted, will try full heal with devices now turned off.
stusviews Posted February 17, 2015 Posted February 17, 2015 I am unclear what the PLM has to do with z-wave? Also at this point of time my ISY994i is up and sending commands as usual. It is the other circuits in the house I am powering off (not the PLM / ISY circuit) Oops, I was responding to you other post http://forum.universal-devices.com/topic/15364-rf-comms-issues/page-3
Scyto Posted February 17, 2015 Posted February 17, 2015 Here is the log from an include / exclude cycle. While the lock showed me a red X the ISY recorded an exclude for device 17 (I am unclear if this is the lock or not) Inlcude didn't seem to do anything. Mon 02/16/2015 18:27:51 : [ZWAVE-TX-NR ] [0105004B013B8B]Mon 02/16/2015 18:27:51 : [uZW-CMD 2 ] Start ExcludeMon 02/16/2015 18:27:51 : [ZWAVE-RX ] ACKMon 02/16/2015 18:27:51 : [ZWAVE-RX ] [0107004B3B010000]...Mon 02/16/2015 18:27:51 : [ZWAVE-TX ] ACKMon 02/16/2015 18:27:52 : Listening for Z-Wave devices to remove from the networkMon 02/16/2015 18:28:20 : [ZWAVE-RX ] [0107004B3B020000]...Mon 02/16/2015 18:28:20 : [ZWAVE-TX ] ACKMon 02/16/2015 18:28:20 : [ZWAVE-RX ] [010F004B3B031108]...Mon 02/16/2015 18:28:20 : [ZWAVE-TX ] ACKMon 02/16/2015 18:28:20 : [ZWAVE-RX ] [010F004B3B061108]...Mon 02/16/2015 18:28:20 : [ZWAVE-TX ] ACKMon 02/16/2015 18:28:20 : Removing Z-Wave devices stoppedMon 02/16/2015 18:28:20 : [ZWAVE-TX ] [01030020DC]Mon 02/16/2015 18:28:20 : [ZWAVE-RX ] ACKMon 02/16/2015 18:28:20 : [ZWAVE-RX ] [01080120D34FD282]...Mon 02/16/2015 18:28:20 : [ZWAVE-TX ] ACKMon 02/16/2015 18:28:21 : [ZWAVE-TX ] [01030002FE]Mon 02/16/2015 18:28:21 : [ZWAVE-RX ] ACKMon 02/16/2015 18:28:21 : [ZWAVE-RX ] [0125010205001D3F]...Mon 02/16/2015 18:28:21 : [ZWAVE-TX ] ACKMon 02/16/2015 18:28:21 : [ZWAVE-TX ] [01030005F9]Mon 02/16/2015 18:28:21 : [ZWAVE-RX ] ACKMon 02/16/2015 18:28:21 : [ZWAVE-RX ] [0104010508F7]Mon 02/16/2015 18:28:21 : [ZWAVE-TX ] ACKMon 02/16/2015 18:28:21 : Device 17 excluded from Z-Wave networkMon 02/16/2015 18:29:00 : [ZWAVE-TX-NR ] [0105004AC13C4D]Mon 02/16/2015 18:29:00 : [uZW-CMD 1 ] Start IncludeMon 02/16/2015 18:29:01 : [ZWAVE-RX ] ACKMon 02/16/2015 18:29:01 : [ZWAVE-RX ] [0107004A3C010000]...Mon 02/16/2015 18:29:01 : [ZWAVE-TX ] ACKMon 02/16/2015 18:29:01 : Listening for Z-Wave devices to add to the networkMon 02/16/2015 18:29:50 : [ZWAVE-TX-NR ] [0105004A853D08]Mon 02/16/2015 18:29:50 : [uZW-CMD 8 ] Cancel Include/Exclude/LearnMon 02/16/2015 18:29:50 : [ZWAVE-RX ] ACKMon 02/16/2015 18:29:50 : [ZWAVE-RX ] [0107004A3D061100]...Mon 02/16/2015 18:29:50 : [ZWAVE-TX ] ACKMon 02/16/2015 18:29:50 : Adding Z-Wave devices stoppedMon 02/16/2015 18:29:50 : [ZWAVE-TX ] [01030020DC]Mon 02/16/2015 18:29:50 : [ZWAVE-RX ] ACKMon 02/16/2015 18:29:50 : [ZWAVE-RX ] [01080120D34FD282]...Mon 02/16/2015 18:29:50 : [ZWAVE-TX ] ACKMon 02/16/2015 18:29:50 : [ZWAVE-TX ] [01030002FE]Mon 02/16/2015 18:29:50 : [ZWAVE-RX ] ACKMon 02/16/2015 18:29:50 : [ZWAVE-RX ] [0125010205001D3F]...Mon 02/16/2015 18:29:50 : [ZWAVE-TX ] ACKMon 02/16/2015 18:29:51 : [ZWAVE-TX ] [01030005F9]Mon 02/16/2015 18:29:51 : [ZWAVE-RX ] ACKMon 02/16/2015 18:29:51 : [ZWAVE-RX ] [0104010508F7]Mon 02/16/2015 18:29:51 : [ZWAVE-TX ] ACKMon 02/16/2015 18:29:51 : [VAR 2 10 ] -1
Scyto Posted February 17, 2015 Posted February 17, 2015 Ok I did a reboot and I issue the "http://192.168.1.92/rest/zwave/node/include?power=true&nwi=true" command. I got the same as earlier, but at least I am now getting helpful messages! Mon 02/16/2015 18:42:23 : [ZWAVE-TX-NR ] [0105004AC12A5B]Mon 02/16/2015 18:42:23 : [uZW-CMD 1 ] Start IncludeMon 02/16/2015 18:42:23 : [ZWAVE-RX ] ACKMon 02/16/2015 18:42:23 : [ZWAVE-RX ] [0107004A2A010000]...Mon 02/16/2015 18:42:23 : [ZWAVE-TX ] ACKMon 02/16/2015 18:42:23 : Listening for Z-Wave devices to add to the networkMon 02/16/2015 18:42:47 : [ZWAVE-RX ] [0107004A2A020000]...Mon 02/16/2015 18:42:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:42:47 : Z-Wave device detected, retrieving info 2Mon 02/16/2015 18:42:47 : [ZWAVE-RX ] [010F004A2A031208]...Mon 02/16/2015 18:42:47 : [ZWAVE-TX ] ACKMon 02/16/2015 18:42:47 : Z-Wave device detected, retrieving info 3Mon 02/16/2015 18:43:21 : [ZWAVE-RX ] [0107004A2A051200]...Mon 02/16/2015 18:43:21 : [ZWAVE-TX ] ACKMon 02/16/2015 18:43:21 : Z-Wave device detected, retrieving info 5Mon 02/16/2015 18:43:21 : [ZWAVE-TX ] [0105004A852B1E]Mon 02/16/2015 18:43:21 : [ZWAVE-RX ] ACKMon 02/16/2015 18:43:21 : [ZWAVE-RX ] [0107004A2B061200]...Mon 02/16/2015 18:43:21 : [ZWAVE-TX ] ACKMon 02/16/2015 18:43:21 : Adding Z-Wave devices stoppedMon 02/16/2015 18:43:21 : [ZWAVE-TX ] [01030020DC]Mon 02/16/2015 18:43:21 : [ZWAVE-RX ] ACKMon 02/16/2015 18:43:21 : [ZWAVE-RX ] [01080120D34FD282]...Mon 02/16/2015 18:43:21 : [ZWAVE-TX ] ACKMon 02/16/2015 18:43:21 : [ZWAVE-TX ] [01030002FE]Mon 02/16/2015 18:43:21 : [ZWAVE-RX ] ACKMon 02/16/2015 18:43:21 : [ZWAVE-RX ] [0125010205001D3F]...Mon 02/16/2015 18:43:21 : [ZWAVE-TX ] ACKMon 02/16/2015 18:43:22 : [ZWAVE-TX ] [01030005F9]Mon 02/16/2015 18:43:22 : [ZWAVE-RX ] ACKMon 02/16/2015 18:43:22 : [ZWAVE-RX ] [0104010508F7]Mon 02/16/2015 18:43:22 : [ZWAVE-TX ] ACKMon 02/16/2015 18:43:22 : Exchanging data with secure Z-Wave device 18 of type 4.64.3Mon 02/16/2015 18:43:22 : Adding secure Z-Wave deviceMon 02/16/2015 18:43:25 : [ZWAVE-TX ] ...Mon 02/16/2015 18:43:25 : [ZWAVE-RX ] ACKMon 02/16/2015 18:43:25 : [ZWAVE-RX ] [0104011301E8]Mon 02/16/2015 18:43:25 : [ZWAVE-TX ] ACKMon 02/16/2015 18:43:35 : [ZWAVE-ADDSECURE] Error 3Mon 02/16/2015 18:43:35 : Failed to include secure Z-Wave device 18 of type 4.64.3Mon 02/16/2015 18:43:35 : [VAR 2 10 ] 1Mon 02/16/2015 18:43:36 : [ZWAVE-RX ] [010500132C01C4]Mon 02/16/2015 18:43:36 : [ZWAVE-TX ] ACK
Jimbo.Automates Posted February 17, 2015 Posted February 17, 2015 Might be a dumb question, but do you have the menu option enabled to allow including a secure device? Can't remember what it is called. Sent from my Nexus 7 using Tapatalk
Scyto Posted February 17, 2015 Posted February 17, 2015 Might be a dumb question, but do you have the menu option enabled to allow including a secure device? Can't remember what it is called. Sent from my Nexus 7 using Tapatalk Yes I do, not dumb.
Michel Kohanim Posted February 18, 2015 Posted February 18, 2015 Hi Scyto, The more we go through this the more I am convinced that the lock is doing something wrong. The errors you are getting is during security phase negotiating AES keys. There's a very systematic process for doing so and thus if any of the steps are missed withing the alloted time, the process fails. Yes, I do know that it used to work with Revolv but I am currently running out of ideas. With kind regards, Michel
Scyto Posted February 18, 2015 Posted February 18, 2015 Want me to try factory resetting the lock? --edit-- or rather I will try factory resetting it tonight and post results
Michel Kohanim Posted February 18, 2015 Posted February 18, 2015 Hi Scyto, YES please! With kind regards, Michel
Scyto Posted February 18, 2015 Posted February 18, 2015 Hi Michael The factory reset made no difference - I got same sort of odd sequences as the reporting above. But.... as it happens.... I have another one of these locks on the shelf (yeah I know I should have thought of this earlier, sorry, I forgot I had it). So I got that out and sat at my PC (different location to the ISY and the back door) and joined the new lock to the ISY - it worked after doing an exclude. I then swapped the locks over so the new lock was on the door. I can query the lock, set codes, unlock and lock - it does need the repeater (Node 15) powered up for this to work reliably - it seems comms to the back door is weak. I moved the 'problematic lock' to the PC location (first floor, almost directly above ISY in basement). I did an exclude and include - it worked just fine. If I had to guess (and I am a poor guesser who doesn't really know what they are talking about) I think the ISY was trying to exclude / include the lock directly but couldn't due to marginal communications (see my comment about repeater earlier in this post). I.E. the request was not being routed through the various repeaters - or was taking multiple paths? I guess next steps: 1) take the 'problematic lock' back to the back door and try again (of course it is no longer in the door) 2) exclude and include the new lock in the door and see if it has issues 3) 'give up and go home/the pub' as it is working Happy to do 1 and 2 if it will help you? --edit-- just did test 1 - the lock failed this time - so the issue is very much physical location specific, let me know if you need me to do test 2
Michel Kohanim Posted February 18, 2015 Posted February 18, 2015 Hi Scyto, Thanks so very much for the details and I am glad you had two of those locks! Please do #2. Please note, ISY is not really trying to anything: Z-Wave mesh network decides how to route packets. Another test would be to swap the repeaters. Perhaps the one next to the lock is not working properly? With kind regards, Michel
Scyto Posted February 19, 2015 Posted February 19, 2015 Michel Kohanim, on 18 Feb 2015 - 3:57 PM, said: Hi Scyto, Thanks so very much for the details and I am glad you had two of those locks! Please do #2. Please note, ISY is not really trying to anything: Z-Wave mesh network decides how to route packets. Another test would be to swap the repeaters. Perhaps the one next to the lock is not working properly? With kind regards, Michel I have had a variety of different z-wave devices marked as repeaters in the area of the lock, I have tried different combinations of having them on and off. (mainly aeon labs repeater, switches, power strips). I am thinking that the ISY can see the lock, but the lock can't see the ISY (the ISY has the better of the two antennas?) and that the marginal communication ranges means the z-wave mesh thinks it is ok for the ISY to send the message (or do messages get routed in multiple directions?)
Scyto Posted February 19, 2015 Posted February 19, 2015 Ok I did test #2 as requested - same issues. Something else, this is device #19, I started the exclude on the ISY, went to the lock and put the master code in and got a red X (i.e. not successful), on the ISY the exclude interface was still up. I cancelled the exclude. What's interesting is the log said 'device 20 excluded' which is odd because that's the lock on the bench besides me that I haven't touched since yesterday and that I excluded yesterday. I only had level 1 logging enabled (sorry) so not sure if this is just an oddity or meaningful. I stand by my guess-assumption that there is not full 2-way comms between lock and ISY. However as the lock is included and working now we can see its info - Node 19. Wed 02/18/2015 19:12:53 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:53 : [ZWAVE-RX ] [0125010205001D3F]...Wed 02/18/2015 19:12:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:53 : [ZW-SHOW ] ----------------------------------------------Wed 02/18/2015 19:12:53 : [ZWAVE-TX ] [010700800100002C]...Wed 02/18/2015 19:12:53 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:53 : [ZWAVE-RX ] [0120018008650000]...Wed 02/18/2015 19:12:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:53 : [ZWAVE-TX ] [010700800101002D]...Wed 02/18/2015 19:12:53 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:53 : [ZWAVE-RX ] [0120018008650000]...Wed 02/18/2015 19:12:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:53 : [ZWAVE-TX ] [010700800100012E]...Wed 02/18/2015 19:12:53 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:53 : [ZWAVE-RX ] [0120018008440000]...Wed 02/18/2015 19:12:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:53 : [ZW-SHOW ] Node 1 - [This ISY] has the following neighborsWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:12:54 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 11 - TV On-Off Power SwitchWed 02/18/2015 19:12:54 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:12:54 : [ZW-SHOW ]Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] [010700800200002F]...Wed 02/18/2015 19:12:54 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-RX ] [012001803C610400]...Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-TX ] [0107008002010030]...Wed 02/18/2015 19:12:54 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-RX ] [012001803C610400]...Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-TX ] [0107008002000131]...Wed 02/18/2015 19:12:54 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-RX ] [012001803C400000]...Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:54 : [ZW-SHOW ] Node 2 - Front Porch and Lanterns has the following neighborsWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 5 - Xmas LightsWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 6 - Ground LightsWed 02/18/2015 19:12:54 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:12:54 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:54 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:12:54 : [ZW-SHOW ] - - Node 19 - BackDoor DeadBoltWed 02/18/2015 19:12:54 : [ZW-SHOW ]Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] [0107008003000032]...Wed 02/18/2015 19:12:54 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-RX ] [012001801A610400]...Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-TX ] [0107008003010033]...Wed 02/18/2015 19:12:54 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:54 : [ZWAVE-RX ] [012001801A610400]...Wed 02/18/2015 19:12:54 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-TX ] [0107008003000134]...Wed 02/18/2015 19:12:55 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-RX ] [012001801A400000]...Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:55 : [ZW-SHOW ] Node 3 - Back Porch Lanterns has the following neighborsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 5 - Xmas LightsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:12:55 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:12:55 : [ZW-SHOW ] - - Node 19 - BackDoor DeadBoltWed 02/18/2015 19:12:55 : [ZW-SHOW ]Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] [0107008004000035]...Wed 02/18/2015 19:12:55 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-RX ] [0120018037610000]...Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-TX ] [0107008004010036]...Wed 02/18/2015 19:12:55 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-RX ] [0120018037610000]...Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-TX ] [0107008004000137]...Wed 02/18/2015 19:12:55 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-RX ] [0120018036400000]...Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:55 : [ZW-SHOW ] Node 4 - Front Balcony has the following neighborsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - - Node 1 - [This ISY]Wed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 5 - Xmas LightsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 6 - Ground LightsWed 02/18/2015 19:12:55 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:12:55 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:55 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:12:55 : [ZW-SHOW ]Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] [0107008005000038]...Wed 02/18/2015 19:12:55 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:55 : [ZWAVE-RX ] [012001802E210000]...Wed 02/18/2015 19:12:55 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-TX ] [0107008005010039]...Wed 02/18/2015 19:12:56 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-RX ] [012001802E210000]...Wed 02/18/2015 19:12:56 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-TX ] [010700800500013A]...Wed 02/18/2015 19:12:56 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-RX ] [012001802E000000]...Wed 02/18/2015 19:12:56 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:56 : [ZW-SHOW ] Node 5 - Xmas Lights has the following neighborsWed 02/18/2015 19:12:56 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:12:56 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:12:56 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:12:56 : [ZW-SHOW ] - Repeater - Node 6 - Ground LightsWed 02/18/2015 19:12:56 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:12:56 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:56 : [ZW-SHOW ]Wed 02/18/2015 19:12:56 : [ZWAVE-TX ] [010700800600003B]...Wed 02/18/2015 19:12:56 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-RX ] [012001801A200000]...Wed 02/18/2015 19:12:56 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-TX ] [010700800601003C]...Wed 02/18/2015 19:12:56 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-RX ] [012001801A200000]...Wed 02/18/2015 19:12:56 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-TX ] [010700800600013D]...Wed 02/18/2015 19:12:56 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:56 : [ZWAVE-RX ] [012001801A000000]...Wed 02/18/2015 19:12:56 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:56 : [ZW-SHOW ] Node 6 - Ground Lights has the following neighborsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 5 - Xmas LightsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:57 : [ZW-SHOW ]Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] [010700800900003E]...Wed 02/18/2015 19:12:57 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-RX ] [012001801F600400]...Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-TX ] [010700800901003F]...Wed 02/18/2015 19:12:57 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-RX ] [012001801F600400]...Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-TX ] [0107008009000140]...Wed 02/18/2015 19:12:57 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-RX ] [012001801E400000]...Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:57 : [ZW-SHOW ] Node 9 - Front Deadbolt has the following neighborsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - - Node 1 - [This ISY]Wed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 5 - Xmas LightsWed 02/18/2015 19:12:57 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:12:57 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:12:57 : [ZW-SHOW ] - - Node 19 - BackDoor DeadBoltWed 02/18/2015 19:12:57 : [ZW-SHOW ]Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] [010700800B000041]...Wed 02/18/2015 19:12:57 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-RX ] [0120018001180000]...Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-TX ] [010700800B010042]...Wed 02/18/2015 19:12:57 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:57 : [ZWAVE-RX ] [0120018001180000]...Wed 02/18/2015 19:12:57 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-TX ] [010700800B000143]...Wed 02/18/2015 19:12:58 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-RX ] [0120018000180000]...Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:58 : [ZW-SHOW ] Node 11 - TV On-Off Power Switch has the following neighborsWed 02/18/2015 19:12:58 : [ZW-SHOW ] - - Node 1 - [This ISY]Wed 02/18/2015 19:12:58 : [ZW-SHOW ] - Repeater - Node 12 - AV On-Off Power SwitchWed 02/18/2015 19:12:58 : [ZW-SHOW ] - Repeater - Node 13 - ZW 013 On-Off Power SwitchWed 02/18/2015 19:12:58 : [ZW-SHOW ]Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] [010700800C000044]...Wed 02/18/2015 19:12:58 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-RX ] [0120018000140000]...Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-TX ] [010700800C010045]...Wed 02/18/2015 19:12:58 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-RX ] [0120018000140000]...Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-TX ] [010700800C000146]...Wed 02/18/2015 19:12:58 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-RX ] [0120018000140000]...Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:58 : [ZW-SHOW ] Node 12 - AV On-Off Power Switch has the following neighborsWed 02/18/2015 19:12:58 : [ZW-SHOW ] - Repeater - Node 11 - TV On-Off Power SwitchWed 02/18/2015 19:12:58 : [ZW-SHOW ] - Repeater - Node 13 - ZW 013 On-Off Power SwitchWed 02/18/2015 19:12:58 : [ZW-SHOW ]Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] [010700800D000047]...Wed 02/18/2015 19:12:58 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:58 : [ZWAVE-RX ] [01200180000C0000]...Wed 02/18/2015 19:12:58 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-TX ] [010700800D010048]...Wed 02/18/2015 19:12:59 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-RX ] [01200180000C0000]...Wed 02/18/2015 19:12:59 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-TX ] [010700800D000149]...Wed 02/18/2015 19:12:59 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-RX ] [01200180000C0000]...Wed 02/18/2015 19:12:59 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:59 : [ZW-SHOW ] Node 13 - ZW 013 On-Off Power Switch has the following neighborsWed 02/18/2015 19:12:59 : [ZW-SHOW ] - Repeater - Node 11 - TV On-Off Power SwitchWed 02/18/2015 19:12:59 : [ZW-SHOW ] - Repeater - Node 12 - AV On-Off Power SwitchWed 02/18/2015 19:12:59 : [ZW-SHOW ]Wed 02/18/2015 19:12:59 : [ZWAVE-TX ] [010700800E00004A]...Wed 02/18/2015 19:12:59 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-RX ] [012001803F410000]...Wed 02/18/2015 19:12:59 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-TX ] [010700800E01004B]...Wed 02/18/2015 19:12:59 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-RX ] [012001803F410000]...Wed 02/18/2015 19:12:59 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-TX ] [010700800E00014C]...Wed 02/18/2015 19:12:59 : [ZWAVE-RX ] ACKWed 02/18/2015 19:12:59 : [ZWAVE-RX ] [012001803E400000]...Wed 02/18/2015 19:12:59 : [ZWAVE-TX ] ACKWed 02/18/2015 19:12:59 : [ZW-SHOW ] Node 14 - Front Lever Lock has the following neighborsWed 02/18/2015 19:12:59 : [ZW-SHOW ] - - Node 1 - [This ISY]Wed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 5 - Xmas LightsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 6 - Ground LightsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:13:00 : [ZW-SHOW ]Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] [010700800F00004D]...Wed 02/18/2015 19:13:00 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-RX ] [012001800F210400]...Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-TX ] [010700800F01004E]...Wed 02/18/2015 19:13:00 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-RX ] [012001800F210400]...Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-TX ] [010700800F00014F]...Wed 02/18/2015 19:13:00 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-RX ] [012001800E000000]...Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:00 : [ZW-SHOW ] Node 15 - ZW 015 Repeater has the following neighborsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - - Node 1 - [This ISY]Wed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:13:00 : [ZW-SHOW ] - Repeater - Node 4 - Front BalconyWed 02/18/2015 19:13:00 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:13:00 : [ZW-SHOW ] - - Node 14 - Front Lever LockWed 02/18/2015 19:13:00 : [ZW-SHOW ] - - Node 19 - BackDoor DeadBoltWed 02/18/2015 19:13:00 : [ZW-SHOW ]Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] [0107008010000050]...Wed 02/18/2015 19:13:00 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-RX ] [0120018000000000]...Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-TX ] [0107008010010051]...Wed 02/18/2015 19:13:00 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:00 : [ZWAVE-RX ] [0120018000000000]...Wed 02/18/2015 19:13:00 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-TX ] [0107008010000152]...Wed 02/18/2015 19:13:01 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-RX ] [0120018000000000]...Wed 02/18/2015 19:13:01 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:01 : [ZW-SHOW ] Node 16 - ZW 016 Remote Control has the following neighborsWed 02/18/2015 19:13:01 : [ZW-SHOW ] No NeighborsWed 02/18/2015 19:13:01 : [ZW-SHOW ]Wed 02/18/2015 19:13:01 : [ZWAVE-TX ] [0107008013000053]...Wed 02/18/2015 19:13:01 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-RX ] [0120018006410000]...Wed 02/18/2015 19:13:01 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-TX ] [0107008013010054]...Wed 02/18/2015 19:13:01 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-RX ] [0120018006410000]...Wed 02/18/2015 19:13:01 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-TX ] [0107008013000155]...Wed 02/18/2015 19:13:01 : [ZWAVE-RX ] ACKWed 02/18/2015 19:13:01 : [ZWAVE-RX ] [0120018006400000]...Wed 02/18/2015 19:13:01 : [ZWAVE-TX ] ACKWed 02/18/2015 19:13:01 : [ZW-SHOW ] Node 19 - BackDoor DeadBolt has the following neighborsWed 02/18/2015 19:13:01 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:13:01 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:13:01 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:13:01 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:13:01 : [ZW-SHOW ]Wed 02/18/2015 19:13:01 : [ZW-SHOW ] ----------------------------------------------Wed 02/18/2015 19:13:01 : [uZW-CMD 39 ] Show Node Network : All
Scyto Posted February 19, 2015 Posted February 19, 2015 Here is the query all for Node 19, the retries are interesting... especially as the lock claims to see neighbors at the far front of the house in addition to the ones at the back of the house... Wed 02/18/2015 19:14:37 : [ZW-SHOW ] ----------------------------------------------Wed 02/18/2015 19:14:37 : [ZW-SHOW ] ZW019_1 uid=19 type=4.64.3 mid=59 tid=25409 pid=20548 model=2Wed 02/18/2015 19:14:37 : [ZW-SHOW ] - x22 V0 APPLICATION_STATUSWed 02/18/2015 19:14:37 : [ZW-SHOW ] - x72 V1 MANUFACTURER_SPECIFICWed 02/18/2015 19:14:37 : [ZW-SHOW ] - x7A V2 FIRMWARE_UPDATE_MDWed 02/18/2015 19:14:37 : [ZW-SHOW ] - x98 V0 SECURITYWed 02/18/2015 19:14:37 : [ZW-SHOW ] - x86 V0 VERSIONWed 02/18/2015 19:14:37 : [ZW-SHOW ]Wed 02/18/2015 19:14:37 : [ZWAVE-TX ] [0107008013000056]...Wed 02/18/2015 19:14:37 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:37 : [ZWAVE-RX ] [0120018006410000]...Wed 02/18/2015 19:14:37 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:38 : [ZWAVE-TX ] [0107008013010057]...Wed 02/18/2015 19:14:38 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:38 : [ZWAVE-RX ] [0120018006410000]...Wed 02/18/2015 19:14:38 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:38 : [ZWAVE-TX ] [0107008013000158]...Wed 02/18/2015 19:14:38 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:38 : [ZWAVE-RX ] [0120018006400000]...Wed 02/18/2015 19:14:38 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:38 : [ZW-SHOW ] Node 19 - BackDoor DeadBolt has the following neighborsWed 02/18/2015 19:14:38 : [ZW-SHOW ] - Repeater - Node 2 - Front Porch and LanternsWed 02/18/2015 19:14:38 : [ZW-SHOW ] - Repeater - Node 3 - Back Porch LanternsWed 02/18/2015 19:14:38 : [ZW-SHOW ] - - Node 9 - Front DeadboltWed 02/18/2015 19:14:38 : [ZW-SHOW ] - Repeater - Node 15 - ZW 015 RepeaterWed 02/18/2015 19:14:38 : [ZW-SHOW ]Wed 02/18/2015 19:14:38 : [ZWAVE-TX ZW019_1] ...Wed 02/18/2015 19:14:38 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:38 : [ZWAVE-RX ] [0104011301E8]Wed 02/18/2015 19:14:38 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:40 : [ZWAVE-RX ] [010500135900B0]Wed 02/18/2015 19:14:40 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:40 : [ZWAVE-RX ZW019_1] ...Wed 02/18/2015 19:14:40 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:40 : [ZWAVE-TX ZW019_1] ...Wed 02/18/2015 19:14:40 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:40 : [ZWAVE-RX ] [0104011301E8]Wed 02/18/2015 19:14:40 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:41 : [ZWAVE-RX ] [010500135A00B3]Wed 02/18/2015 19:14:41 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:45 : [ZWAVE-TX ] ZWAVE-WAIT Waiting for retry 1 of 2Wed 02/18/2015 19:14:45 : [ZWAVE-TX ZW019_1] ...Wed 02/18/2015 19:14:45 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:45 : [ZWAVE-RX ] [0104011301E8]Wed 02/18/2015 19:14:45 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:46 : [ZWAVE-RX ] [010500135B00B2]Wed 02/18/2015 19:14:46 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:46 : [ZWAVE-RX ZW019_1] ...Wed 02/18/2015 19:14:46 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:46 : [ZWAVE-TX ZW019_1] ...Wed 02/18/2015 19:14:46 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:46 : [ZWAVE-RX ] [0104011301E8]Wed 02/18/2015 19:14:46 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:47 : [ZWAVE-RX ] [010500135C00B5]Wed 02/18/2015 19:14:47 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:51 : [ZWAVE-TX ] ZWAVE-WAIT Waiting for retry 2 of 2Wed 02/18/2015 19:14:52 : [ZWAVE-TX ZW019_1] ...Wed 02/18/2015 19:14:52 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:52 : [ZWAVE-RX ] [0104011301E8]Wed 02/18/2015 19:14:52 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:53 : [VAR 2 10 ] 1Wed 02/18/2015 19:14:53 : [ZWAVE-RX ] [010500135D00B4]Wed 02/18/2015 19:14:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:53 : [ZWAVE-RX ZW019_1] ...Wed 02/18/2015 19:14:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:53 : [ZWAVE-TX ZW019_1] ...Wed 02/18/2015 19:14:53 : [ZWAVE-RX ] ACKWed 02/18/2015 19:14:53 : [ZWAVE-RX ] [0104011301E8]Wed 02/18/2015 19:14:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:53 : [ZWAVE-RX ] [010500135E00B7]Wed 02/18/2015 19:14:53 : [ZWAVE-TX ] ACKWed 02/18/2015 19:14:58 : [ZW-SHOW ] Node 19 - BackDoor DeadBolt cannot retrieve association groupsWed 02/18/2015 19:14:58 : [ZW-SHOW ]Wed 02/18/2015 19:14:58 : [ZW-SHOW ] ----------------------------------------------Wed 02/18/2015 19:14:58 : [uZW-CMD 37 ] Show All Node Details : ZW019_1
MWareman Posted February 19, 2015 Posted February 19, 2015 So node 19 cannot (directly) talk to ISY, and is relying on a repeater. Also, node 1 (ISY) is also relying on a repeater to talk to node 19. I've had the same issue with Kwikset not routing reliably back to ISY thru Aeon 'repeaters'. Something is going on with these repeater devices. As soon as I replaced a repeater with an Aeon siren (newer 500 series zwave chip) then the lock suddenly became 100% reliable. I strongly feel the issue is the Aeon repeater devices not handling secure devices properly.
Scyto Posted February 19, 2015 Posted February 19, 2015 Gah, guess I need to buy one to test, also that makes me think all the older aeon devices acting as repeaters may have the same issue....
Michel Kohanim Posted February 20, 2015 Posted February 20, 2015 Hi Scyto, I am with Michael on this. But, can you leave it as is for a day and simply log or email the lock states? There's is definitely a problem with Schlage not responding for 15 seconds when too busy. I just want to make sure all the queries and node info commands are not contributing to the issue. With kind regards, Michel
Scyto Posted February 20, 2015 Posted February 20, 2015 Ok, I will setup a notification. Lock and unlocks from the console worked 100% reliably - I did 10 or so in sequence no issues. I remember that revolv could only program one user code every 10 seconds or so on schlage - IIRC they put a fix in their UI to stop too many code reprograms in fast sequence.. Interesting I have issues to the front door lock too.. (though locking and ulokcing remotely work) Fri 02/20/2015 17:15:11 : [ZWAVE-TX ZW014_1] ...Fri 02/20/2015 17:15:11 : [ZWAVE-RX ] ACKFri 02/20/2015 17:15:11 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:15:11 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-RX ] [010500130D00E4]Fri 02/20/2015 17:15:12 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:12 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-TX ZW014_1] ...Fri 02/20/2015 17:15:12 : [ZWAVE-RX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:15:12 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-RX ] [010500130E00E7]Fri 02/20/2015 17:15:12 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:12 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:12 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:13 : [ZWAVE-RX ] ACKFri 02/20/2015 17:15:13 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:15:13 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:13 : [ZWAVE-RX ] [010500130F00E6]Fri 02/20/2015 17:15:13 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:13 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:13 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:13 : [D2D EVENT ] Event [ZW014_1] [sT] [0] uom=11 prec=0Fri 02/20/2015 17:15:13 : [ ZW014_1] ST 0 (uom=11 prec=0)Fri 02/20/2015 17:15:13 : [D2D-CMP 0015] STS [ZW014_1] ST op=1 Event(val=0 uom=11 prec=0) is Condition(val=0 uom=11 prec=-1) --> trueFri 02/20/2015 17:15:17 : [ZWAVE-TX ZW014_1] ...Fri 02/20/2015 17:15:17 : [ZWAVE-RX ] ACKFri 02/20/2015 17:15:17 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:15:17 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:21 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:21 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:21 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:21 : [ZWAVE-RX ] ACKFri 02/20/2015 17:15:21 : [ZWAVE-RX ] [0104011300E9]Fri 02/20/2015 17:15:21 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:21 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:21 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:21 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:21 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:21 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:22 : [ZWAVE-TX ] ZWAVE-WAIT Waiting for retry 1 of 2Fri 02/20/2015 17:15:22 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:22 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:22 : [ZWAVE-TX ZW014_1] ...Fri 02/20/2015 17:15:22 : [ZWAVE-TX ] ZWAVE-WAIT Waiting for retry 2 of 2Fri 02/20/2015 17:15:22 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:22 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:23 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:23 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:23 : [ZWAVE-TX ZW014_1] ...Fri 02/20/2015 17:15:23 : [D2D EVENT ] Event [ZW014_1] [ERR] [1] uom=0 prec=-1Fri 02/20/2015 17:15:23 : [ ZW014_1] ERR 1Fri 02/20/2015 17:15:23 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:23 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:23 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:23 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:24 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:24 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:24 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:24 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:24 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:24 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:24 : [ZWAVE-RX ] ACKFri 02/20/2015 17:15:24 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:15:24 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:24 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:24 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:24 : [ZWAVE-TX ] ...Fri 02/20/2015 17:15:24 : [ZWAVE-RX ] [010500131900F0]Fri 02/20/2015 17:15:24 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:24 : [ZWAVE-RX ] CANFri 02/20/2015 17:15:24 : [ZWAVE-RX ZW014_1] ...Fri 02/20/2015 17:15:24 : [ZWAVE-TX ] ACKFri 02/20/2015 17:15:24 : [D2D EVENT ] Event [ZW014_1] [ERR] [0] uom=0 prec=-1Fri 02/20/2015 17:15:24 : [ ZW014_1] ERR 0Fri 02/20/2015 17:15:24 : [D2D EVENT ] Event [ZW014_1] [sT] [100] uom=11 prec=0Fri 02/20/2015 17:15:24 : [ ZW014_1] ST 100 (uom=11 prec=0)Fri 02/20/2015 17:15:24 : [D2D-CMP 0015] STS [ZW014_1] ST op=1 Event(val=100 uom=11 prec=0) is Condition(val=0 uom=11 prec=-1) --> false
Scyto Posted February 21, 2015 Posted February 21, 2015 Should the front door lock have two association groups? Fri 02/20/2015 17:18:44 : [ZW-SHOW ] ----------------------------------------------Fri 02/20/2015 17:18:44 : [ZWAVE-TX ZW014_1] [010900130E028505]...Fri 02/20/2015 17:18:44 : [ZWAVE-RX ] ACKFri 02/20/2015 17:18:44 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:18:44 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ] [010500132200CB]Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ZW014_1] [01090004000E0385]...Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZW-SHOW ] Node 14 - Front Lever Lock has 2 association groupsFri 02/20/2015 17:18:45 : [ZWAVE-TX ZW014_1] [010A00130E038502]...Fri 02/20/2015 17:18:45 : [ZWAVE-RX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ] [010500132300CA]Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ZW014_1] [010C0004000E0685]...Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZW-SHOW ] Associations for group 001 of ZW014_1 Front Lever LockFri 02/20/2015 17:18:45 : [ZW-SHOW ] - Node 1 - [This ISY]Fri 02/20/2015 17:18:45 : [ZW-SHOW ]Fri 02/20/2015 17:18:45 : [ZWAVE-TX ZW014_1] [010A00130E038502]...Fri 02/20/2015 17:18:45 : [ZWAVE-RX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ] [0104011301E8]Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ] [010500132400CD]Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:45 : [ZWAVE-RX ZW014_1] [010C0004000E0685]...Fri 02/20/2015 17:18:45 : [ZWAVE-TX ] ACKFri 02/20/2015 17:18:46 : [ZW-SHOW ] Associations for group 002 of ZW014_1 Front Lever LockFri 02/20/2015 17:18:46 : [ZW-SHOW ] - Node 1 - [This ISY]Fri 02/20/2015 17:18:46 : [ZW-SHOW ]Fri 02/20/2015 17:18:46 : [ZW-SHOW ] ----------------------------------------------Fri 02/20/2015 17:18:46 : [uZW-CMD 38 ] Show Node Links : ZW014_1
Scyto Posted February 22, 2015 Posted February 22, 2015 Michael I am pretty convinced there is some sort of issue routing the secure keys at include / exclude in my mesh. Would it be helpful if I: excluded all my other z-wave devices, removed the nodes and test with just the aeon siren as a repeater? create a similar setup with a smartthings or vera (i.e. make sure the lock can only be reached by those hubs via a repeater)? alex
Michel Kohanim Posted February 23, 2015 Posted February 23, 2015 Hi Alex, The associations look good. It's quite possible that it's a timing issue: nonce/key exchange should not take more than 10 seconds otherwise they get invalidated. So, it seems that the key is not being transported and propagated properly. Both #1 and #2 are excellent. I do very much appreciate all the help and support as we definitely have to get to the bottom of this issue. With kind regards, Michel
andyf0 Posted February 23, 2015 Posted February 23, 2015 I believe that the Jasco switches don't send status when they are changed locally - because (I think) they do not have the ability to support associations (something to do with a Lutron patent I seem to recall...) My whole house is populated with Jasco switches (mostly on/off) and they do report status to the ISY when operated locally. However, I believe they have to be in range of the ISY directly to do so. I wish I totally understood why these do and others don't. Jasco does not use "Instant Status". If you use Jasco (GE) dimmers, either switches or outlets, there is a fixed delay before they report status, presumably too lazy to actually determine when they have reached their target dim level so they just delay a fixed amount of time. Jasco (GE) plug-in modules do not report status when operated locally at the module. Wow! Don't know how I ended up responding to an 8 day old post. Sorry!
MWareman Posted February 24, 2015 Posted February 24, 2015 No problem! I think the delay may be to do with working around Lutrons patent on instant notifications. Glad that it works at all! Michael.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.