GGITech Posted March 18, 2015 Share Posted March 18, 2015 So I like the look of the GE/Jasco GE Jasco Iris switches at Lowes. The old versions in the Bubble pack are on sale for $36.50 (10% off if you buy 4 or more) and you can buy a %10 off from e-bay and then get them down to like $32.50 each... So I bought 16 of them to do all the dimmers in the house. I say "old version" because these have a standard size square LED on them, and the "new version" has a hold that just seems smaller, and is 1/10th the size. The new version are in Green boxes, not the bubble packs. The Evolve have a Clear Air Gap switch, so I sent all 16 of those back to Amazon....since I had GE Jasco already. They work well, 3 way, 3 way dimmer, dimmer, and switch. My biggest question, is can you DISABLE the LED completly? I would really like this for the Wall Plugs, since it is a full size (round) blue LED and in the bedroom, it is bright.... I can't find a parmeter that disables the led completly, anyone have a solution, outside of putting white tape over it? Just to note, you can change the LED config with this: LEDWhen shipped from the factory, the LED is set to turn ON when theconnected light is turned OFF. This allows the LED to indicate theswitch location in a dark room. To make the LED turn ON whenthe light is turned ON, change parameter 3 value to 1Parameter No: 3Length: 1 ByteValid Values = 0 or 1 (default 0) 0 = On when Off 1 = Off when device is on Link to comment
Scyto Posted March 21, 2015 Share Posted March 21, 2015 I had a quick look on the pepper z-wave libarary I don't see any other attributes, so I guess the answer is "no you can't"... (unless there are secret attributes?) http://www.pepper1.net/zwavedb/?sort=name&sort_type=desc&filter_cmd_class=&filter_frequency=&filter_language=&filter_manufacturer=58&filter_generic_class= Link to comment
DavidG Posted March 22, 2015 Share Posted March 22, 2015 This might be more relies in the ZWave section. Not sure if an admin can move it or not. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.