stusviews Posted April 18, 2015 Posted April 18, 2015 ISY 994i Pro, Release 4.2.30. The Hub PLM appears identical to the original Hub. As best as I could count, 96 wired Insteon devices, 17 wireless. Seven of the wireless devices are RemoteLincs (2440) that I've mentioned elsewhere. I replaced my PLM with the Hub PLM and then went back to the original PLM. Some details omitted for brevity. Here's the results including the procedures: SmartHome HUB version 1 PLM.pdf Edit: corrected PDF
Brian H Posted April 18, 2015 Posted April 18, 2015 Thank you for the information. It appears that the HUB PLM module is now in beta status.
Teken Posted April 18, 2015 Posted April 18, 2015 The fact that you got an All On concerns me. When I read your reply I thought this pertained to the HUB PLM! After reviewing the PDF it was related to the hardware 2 v.9E PLM. Let's see if the new HUB PLM resolves this ALL ON / ALL OFF issue moving forward. Ideals are peaceful - History is violent
Brian H Posted April 19, 2015 Posted April 19, 2015 Teken; The way I read it. The HUB version PLM1 is the beta new HUB style PLM and is the list on the left side of the information.
Teken Posted April 19, 2015 Posted April 19, 2015 Teken; The way I read it. The HUB version PLM1 is the beta new HUB style PLM and is the list on the left side of the information. Correct, but based on the PDF that unit (HUB PLM) did not experience a ALL ON event, right?
stusviews Posted April 19, 2015 Author Posted April 19, 2015 Correct, but based on the PDF that unit (HUB PLM) did not experience a ALL ON event, right? Neither has the 2413S PLM since a few weeks ago. I used the Hub PLM for only about a week and a half, so there's no real conclusion.
Teken Posted April 19, 2015 Posted April 19, 2015 Neither has the 2413S PLM since a few weeks ago. I used the Hub PLM for only about a week and a half, so there's no real conclusion. Well, I am certainly interested to see how this unfolds in the next few months. What have they indicated is different in this HUB PLM that may possibly resolve this ALL ON / ALL OFF issue? I ask because the hardware 2 v.9E had already removed the ALL ON / ALL OFF commands from the firmware yet it still experienced the same issues. Is there another flag that has been removed?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.