jetfan101 Posted August 14, 2015 Share Posted August 14, 2015 How to shift primary control to aeotec stick .so I can upgrade firmware. it is not being picked up by isy at all thanks Tom Link to comment
Michel Kohanim Posted August 14, 2015 Share Posted August 14, 2015 Hi jetfan, http://wiki.universal-devices.com/index.php?title=ISY_Z-Wave_GenII_-_Instructions#Shift_Primary_Control_from_ISY_to_a_different_Controller With kind regards, Michel Link to comment
jetfan101 Posted August 14, 2015 Author Share Posted August 14, 2015 Hi Michel , i tried several different ways . usb pluged into computer ,not pluged in , add device and change primary. This is z stick gen 5 zw090-A will this work? Thanks again Link to comment
jetfan101 Posted August 14, 2015 Author Share Posted August 14, 2015 Hi Michel, how close does the stick have to be near isy Thanks Tom Link to comment
MWareman Posted August 14, 2015 Share Posted August 14, 2015 For controller shift, my stick needs to be 2-3' from ISY to work. Link to comment
stusviews Posted August 15, 2015 Share Posted August 15, 2015 Typographical error (typo): Put the other controller in Learn Mode. Refer to the user guid for your product on how to do this. Put the other controller in Learn Mode. Refer to the user guide for your product on how to do this. Link to comment
jetfan101 Posted August 16, 2015 Author Share Posted August 16, 2015 aotec 5 not recognized. And now z wave dongle .does not have add device anymore. and I cannot control any zwave device. do i have to factory reset and add evrything back? Or is there any other way. Thanks Link to comment
Michel Kohanim Posted August 18, 2015 Share Posted August 18, 2015 Hi jetfan101, It seems that the primary has been shifted to the other controller (that's why the menu is gone). Please try shifting it back ... I suspect aeotec 5 does not support all the nodes and/or secure devices you have. With kind regards, Michel Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.