jetfan101 Posted August 14, 2015 Posted August 14, 2015 How to shift primary control to aeotec stick .so I can upgrade firmware. it is not being picked up by isy at all thanks Tom
Michel Kohanim Posted August 14, 2015 Posted August 14, 2015 Hi jetfan, http://wiki.universal-devices.com/index.php?title=ISY_Z-Wave_GenII_-_Instructions#Shift_Primary_Control_from_ISY_to_a_different_Controller With kind regards, Michel
jetfan101 Posted August 14, 2015 Author Posted August 14, 2015 Hi Michel , i tried several different ways . usb pluged into computer ,not pluged in , add device and change primary. This is z stick gen 5 zw090-A will this work? Thanks again
jetfan101 Posted August 14, 2015 Author Posted August 14, 2015 Hi Michel, how close does the stick have to be near isy Thanks Tom
MWareman Posted August 14, 2015 Posted August 14, 2015 For controller shift, my stick needs to be 2-3' from ISY to work.
stusviews Posted August 15, 2015 Posted August 15, 2015 Typographical error (typo): Put the other controller in Learn Mode. Refer to the user guid for your product on how to do this. Put the other controller in Learn Mode. Refer to the user guide for your product on how to do this.
jetfan101 Posted August 16, 2015 Author Posted August 16, 2015 (edited) aotec 5 not recognized. And now z wave dongle .does not have add device anymore. and I cannot control any zwave device. do i have to factory reset and add evrything back? Or is there any other way. Thanks Edited August 16, 2015 by jetfan101
Michel Kohanim Posted August 18, 2015 Posted August 18, 2015 Hi jetfan101, It seems that the primary has been shifted to the other controller (that's why the menu is gone). Please try shifting it back ... I suspect aeotec 5 does not support all the nodes and/or secure devices you have. With kind regards, Michel
Recommended Posts