Plau Posted March 8, 2016 Posted March 8, 2016 Hi Guys Prowl notification doesn't work since a couple days, I meet this issue a coupole years ago http://forum.universal-devices.com/topic/9347-resolved-network-resource-prowl-error/where solution was under settings the Verify checkbox under the section "HTTPS Server Settings." But I'm unable to located this box !
jerlands Posted March 8, 2016 Posted March 8, 2016 You need to download the Dashboard then upper right hand corner you'll see a wrench looking icon. In admin console (Help > About) then download from Current Release, Betas, and Bug Reports for the correct firmware version you have installed. Link to dashboard is located bottom of page. Jon...
Plau Posted March 8, 2016 Author Posted March 8, 2016 I must be blind, unable to see "HTTPS Server Settings." in the Administrative Console, print screen will be usefull
jerlands Posted March 9, 2016 Posted March 9, 2016 The "Verify" setting is not in the Administration Console. You have to use the Dashboard. See post #2 Jon...
jerlands Posted March 9, 2016 Posted March 9, 2016 Here's an image of the setting in Dashboard > Click wrench Icon > Network Jon...
Plau Posted March 9, 2016 Author Posted March 9, 2016 (edited) Thanks Jon, mine don't look like yours Edited March 9, 2016 by Plau
jerlands Posted March 9, 2016 Posted March 9, 2016 I didn't realize you were using the 99i... Couple things I noticed. 1.) The Dashboard and Admin Console UI used needs to be the same version as your firmware (see your first image "version.jpg.") You need to clear your Java Cache then download the correct versions (if your Admin Console is also wrong see Help > About) 2.) Your network settings are UPnP. You might change this to DHCP and reserve the address in your router (after you install the correct Dashboard and if needed Admin Console.) That could be your problem. Jon...
Plau Posted March 9, 2016 Author Posted March 9, 2016 Unfortunately the dashboard for 3.3.10 is missing, anyway I'm not sure issue came from this side, the system was up and running for more than 3 years.I did not notice any change on my network or hardwares since issue.
jerlands Posted March 9, 2016 Posted March 9, 2016 Unfortunately the dashboard for 3.3.10 is missing, anyway I'm not sure issue came from this side, the system was up and running for more than 3 years. I did not notice any change on my network or hardwares since issue. You might look at the network and see if ISY is visible. Jon...
Plau Posted March 10, 2016 Author Posted March 10, 2016 (edited) he is accessible by admin console or dashboard, I'm not sure to understand where you want going ? Edited March 10, 2016 by Plau
jerlands Posted March 10, 2016 Posted March 10, 2016 You are using UPnP and not DHCP. You might research this a little on the Forum or look at this thread. The fact Prowl notifications isn't working possibly has to do with network issue. Jon..
Plau Posted March 11, 2016 Author Posted March 11, 2016 I switched to dhcp and made ip reservation in my router, but still the same error message, I use another ha software (domoticz) and prowl work as it is (same api key) I have no idea where investigated now!
MWareman Posted March 11, 2016 Posted March 11, 2016 (edited) 3.3.10 non-pro cannot connect to most SSL servers now - because it only supports ciphers that are now considered so insecure that most web sites have now removed them. To use any of the network notification services you'll either have to upgrade to a 994 - or setup a reverse proxy to handle SSL for the old ISY. Michael. Edited March 11, 2016 by MWareman
Recommended Posts