Scene Problem

[Joe Dunn]

My home irrigation system consists of an EZRain Irrigation Controller that is controlled by an ISY program.

 

I want to add an 8 button On/Off Keypad  to show which sprinklers are on and to be able to command them by pushing the appropriate button.

 

I created a Scene containing a button and the appropriate Irrigation Controller interface.  I can call up the Scene but nothing happens.

 

Any suggestions?

 

Do I need to use a Scene?

 

Would it be better to do this all by program?

[oberkc]

All you are trying to do is manually control an irrigation zone from a keypad button?  Sounds like you have done everything correct to me, but make sure you added the KPL button as a "controller" of the scene.  I believe controllers show up as red in the scene listing.

[Joe Dunn]

It turns out that the problem was in the wire connecting the irrigation controller to the valve.  The wire came loose and fell out.

 

Thanks for the help.