jleves Posted April 16, 2016 Posted April 16, 2016 I need to restore my PLM as some devices are not updating the status in ISY when they are turned on/off locally. When I open the Restore PLM from the Main menu, it says to make sure battery powered devices are in Programming Mode. Do I need to do something to my Schlage Z-Wave locks before I start the PLM Restore process? Thanks in advance.
LeeG Posted April 16, 2016 Posted April 16, 2016 A simple File | Restore Modem (PLM) only rebuilds the link database in the PLM. The Wiki instructions are for restoring a new PLM that has replaced a failing PLM.
stusviews Posted April 16, 2016 Posted April 16, 2016 Battery powered devices need to be restored one-at-a-time. Take the device out of linking mode before restoring another. Z-Wave device need to be healed, not restored.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.