Jump to content

Remotelinc On/Off does not work


ggodding

Recommended Posts

Posted

I have a problem with the Remotelinc 2440 buttons not sending on/off commands. If you hold button the down it will brighten/dim the linked insteon device. When I first added remote linc, everything worked OK except buttons 4 and 6 (which had the on/off problem). I then removed the device from ISY, did a factory reset on the remotelinc. On/Off then stopped working for all buttons.

 

The all off/all on buttons work as expected for the linked devices.

 

My setup is using 6 scenes, making a remotelinc button a controller in each scene and setting the other devices as responders.

 

Has anyone else seen this problem?

Posted

Hello ggodding,

 

Yes, I have seen this problem very many times. In most cases, factory reset fixes this issue but in some cases only a replacement will fix it. i2 problems do exacerbate the issue.

 

My first question is: what version of ISY firmware do you have? If 2.6.8 and below, then I strongly recommend getting a replacement. If not, then I recommend the following:

1. Remove your RL from ISY

2. Do a factory reset on it

3. Link Management -> Advanced Options -> i1 Only Mode

4. Add back the RL to ISY

5. Link Management -> Advanced Options -> Automatic

6. Try adding it to a scene

 

With kind regards,

Michel

 

 

I have a problem with the Remotelinc 2440 buttons not sending on/off commands. If you hold button the down it will brighten/dim the linked insteon device. When I first added remote linc, everything worked OK except buttons 4 and 6 (which had the on/off problem). I then removed the device from ISY, did a factory reset on the remotelinc. On/Off then stopped working for all buttons.

 

The all off/all on buttons work as expected for the linked devices.

 

My setup is using 6 scenes, making a remotelinc button a controller in each scene and setting the other devices as responders.

 

Has anyone else seen this problem?

Guest
This topic is now closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
  • Who's Online (See full list)

  • Forum Statistics

    • Total Topics
      37k
    • Total Posts
      371.4k
×
×
  • Create New...