KSchex Posted November 6, 2016 Posted November 6, 2016 Hi All, I am trying to add a Z Wave Linear WADWAZ-1 Door Sensor to my ISY994. Unfortunately all I see is the Tamper Alarm and Notify Sensor (battery level) in the list. These work fine but I don't see the alarm or aux contact alarm. I have tried all combinations of excluding and including, letting it sit for a few hours then move the magnet to generate an alarm, etc. No luck. Can any one recommend anything that might fix this or possibly a sensor that works properly with the ISY? I have loaded the latest ISY software and ZWave firmware. Thanks....
G W Posted November 6, 2016 Posted November 6, 2016 It may not be supported. What ISY firmware version are you running? I. S. B. S. P. Best regards, Gary Funk
KSchex Posted November 6, 2016 Author Posted November 6, 2016 Thanks for the reply. The Zwave Firmware Ver is 4.55. I would agree with possibly not being supported. I will need to find a like unit that is..
KSchex Posted November 6, 2016 Author Posted November 6, 2016 Thanks for the reply. The Zwave Firmware Ver is 4.55. I would agree with possibly not being supported. I will need to find a like unit that is.. Not sure I answered the question...ISY Firmware: Insteon_UD994_OADR v.4.5.1 (2016-06-15-14:06:00).
G W Posted November 6, 2016 Posted November 6, 2016 Not sure I answered the question...ISY Firmware: Insteon_UD994_OADR v.4.5.1 (2016-06-15-14:06:00).You could try 4.5.4 but I'm not sure the version 4 code can support some Z-Wave devices. Version 5 is currently being developed to support more devices. I. S. B. S. P. Best regards, Gary Funk
larryllix Posted November 6, 2016 Posted November 6, 2016 Not sure I answered the question...ISY Firmware: Insteon_UD994_OADR v.4.5.1 (2016-06-15-14:06:00). ...and be sure your UI version matches too. That is a major cause of things working flakey and disappearing.
Chris Jahn Posted November 6, 2016 Posted November 6, 2016 Thanks for the feedback everyone, we'll add the new problems you have reported to the list. Hopefully we will be able to recreate them all ... sometimes I wonder if there is some magic bubble around our lab that kills all bugs that we try to bring to test
larryllix Posted November 6, 2016 Posted November 6, 2016 Thanks for the feedback everyone, we'll add the new problems you have reported to the list. Hopefully we will be able to recreate them all ... sometimes I wonder if there is some magic bubble around our lab that kills all bugs that we try to bring to test I sent you some real bugs. You'll find out tomorrow!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.