tmorse305 Posted May 18, 2017 Share Posted May 18, 2017 (edited) All of my devices have a blank Current State in the Admin Console. I can control the devices but the state remains blank. I also tried to query the devices but the state remains blank. I am getting an error "Maximum Subscribers Reached". I rebooted ISY but that did not help. Also, I cannot connect via the Mobilinc app, it will not connect via the portal. I can log into the portal without a problem Are these thing related? What's going on? Thanks Edited May 18, 2017 by tmorse305 Link to comment
Techman Posted May 18, 2017 Share Posted May 18, 2017 All of my devices have a blank Current State in the Admin Console. I can control the devices but the state remains blank. I also tried to query the devices but the state remains blank. I am getting an error "Maximum Subscribers Reached". I rebooted ISY but that did not help. Also, I cannot connect via the Mobilinc app, it will not connect via the portal. I can log into the portal without a problem Are these thing related? What's going on? Thanks Try removing power from both the ISY and the PLM, then power up the PLM, wait 10 seconds then power up the ISY About how many devices do you have? What's the date code and version of your PLM Do a PLM link count and let me know what the result is. Which ISY are you using, what is the firmware and UI versions? Link to comment
tmorse305 Posted May 18, 2017 Author Share Posted May 18, 2017 (edited) Thanks for the reply Techman, See answers below Try removing power from both the ISY and the PLM, then power up the PLM, wait 10 seconds then power up the ISY I did that but no change in the issues. About how many devices do you have? 50-100 What's the date code and version of your PLM V2.1, 1534 Do a PLM link count and let me know what the result is. Count returns 0. Sounds like a problem... Device Link table also returns a 0 fro any device ISY Link table also returns 0 for any device I choose Which ISY are you using, what is the firmware and UI versions? ISY 994i/IR Pro. 4.5.4 for both PLM reports to be connected, v9E I can still control devices from the console, however after I query for links I lose control of the devices Update I was away for a while since I reported the status above. When I came back, I brought up the Console and the current status was there. Also I did not get the subscriber error message. I was able to query the PLM links (256) and the ISY and device links. So I closed the console and then reopened it. This time I got the error and status I listed above. Can this error message be related? How do I reset the # of Subscribers? Update #2 Problem solved. The "Maximum Subscribers Reached" was causing the Console problem and appears to have solved the Mobilinc problem as well. Maybe smarter heads can figure out why. I solved the "Maximum Subscribers Reached" error when I discovered the Automation Shack app, ISYLogger was trying to resubscribe to the ISY every minute because of a heartbeat timeout. I had seen this behavior before but never with this intensity. I killed the app and all problems went away. Edited May 18, 2017 by tmorse305 Link to comment
Techman Posted May 18, 2017 Share Posted May 18, 2017 Thanks for the reply Techman, See answers below Try removing power from both the ISY and the PLM, then power up the PLM, wait 10 seconds then power up the ISY I did that but no change in the issues. About how many devices do you have? 50-100 What's the date code and version of your PLM V2.1, 1534 Do a PLM link count and let me know what the result is. Count returns 0. Sounds like a problem... Device Link table also returns a 0 fro any device ISY Link table also returns 0 for any device I choose Which ISY are you using, what is the firmware and UI versions? ISY 994i/IR Pro. 4.5.4 for both PLM reports to be connected, v9E I can still control devices from the console, however after I query for links I lose control of the devices Update I was away for a while since I reported the status above. When I came back, I brought up the Console and the current status was there. Also I did not get the subscriber error message. I was able to query the PLM links (256) and the ISY and device links. So I closed the console and then reopened it. This time I got the error and status I listed above. Can this error message be related? How do I reset the # of Subscribers? Update #2 Problem solved. The "Maximum Subscribers Reached" was causing the Console problem and appears to have solved the Mobilinc problem as well. Maybe smarter heads can figure out why. I solved the "Maximum Subscribers Reached" error when I discovered the Automation Shack app, ISYLogger was trying to resubscribe to the ISY every minute because of a heartbeat timeout. I had seen this behavior before but never with this intensity. I killed the app and all problems went away. Glad to hear you got it all resolved. Link to comment
Recommended Posts