abuttino Posted July 11, 2017 Posted July 11, 2017 Does anyone in this forum have any idea about hooking a meter up to the ISY) or, any way to interface with the mPower or any other meter provided by SRP? Sent from my Pixel XL using Tapatalk
bgrubb1 Posted July 11, 2017 Posted July 11, 2017 No direct way that I know of I am on SRP and use a GEM and dashboard for monitoring and it feeds the isy
abuttino Posted July 12, 2017 Author Posted July 12, 2017 Do you have URLs for those things? Sent from my Pixel XL using Tapatalk
larryllix Posted July 12, 2017 Posted July 12, 2017 Does anyone in this forum have any idea about hooking a meter up to the ISY) or, any way to interface with the mPower or any other meter provided by SRP? Sent from my Pixel XL using Tapatalk Some utilities use ZigBee protocol transmitters that can be monitored and there was a lot of thread about that in the past. The best thing would be to call the Utility and ask but getting past the monitor reading support can be difficult. Most of them have never seen a kilowatthour yet.
bgrubb1 Posted July 12, 2017 Posted July 12, 2017 Both the GEM and the dash box can send channel info to the ISY I use the info to help control my peak hour usage from SRP from 3 to 6 pm Examples are sound alarm if either washer or dryer are running on peak, turn off dishwasher, turn off all lights and fans etc Doing so allows me to draw 1kw per hour on peak which makes the bill 20 some percent less than the standard rate
Recommended Posts
Archived
This topic is now archived and is closed to further replies.