Techman Posted July 17, 2017 Share Posted July 17, 2017 I have a motion sensor within about 15 feet of a Switchlinc. Recently when the motion sensor was triggered the switchlinc turned on. The motion sensor and the switchlinc have no relationship. The ISY was unaware that the switchlinc was on until I ran a query. My PLM is the current and latest release. I'm wondering if the false ON was strictly an RF issue, and not a powerline or plm issue, between the two devices. UPDATE: I just took a second look at my Admin Console and it showed almost all of my 10 RF only device as ON Rebooted the PLM and ISY, the Admin console is now showing them as OFF. This is the first time I've come across this problem Link to comment Share on other sites More sharing options...
stusviews Posted July 18, 2017 Share Posted July 18, 2017 I don't know about your other RF devices, but if the MS is set to send On only, then it will always show as On unless it's reset or you reset the ISY (as you did). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.