stephan Posted September 17, 2017 Share Posted September 17, 2017 I have the same issue as this post but did not find any solution. http://forum.universal-devices.com/topic/14045-cant-add-z-wave-devices/ Before I explain the issue I would like to say that I have a bunch of Bali Z-Wave Motorized Shades already working and I also tried removing and adding them again, and they work just fine. But this last one that I am trying to add I get the following issue: In the admin console, I go to Z-wave then Add. I put the shade into link mode and it seems to link just fine: Sun 09/17/2017 14:17:21 : Listening for Z-Wave devices to add to the network Sun 09/17/2017 14:17:39 : [ZWAVE-RX ] [0107004A19020000]... Sun 09/17/2017 14:17:39 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:39 : Z-Wave device detected, retrieving info 2 Sun 09/17/2017 14:17:39 : [ZWAVE-RX ] [0115004A1903130E]... Sun 09/17/2017 14:17:39 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:39 : Z-Wave device detected, retrieving info 3 Sun 09/17/2017 14:17:51 : [ZWAVE-RX ] [0107004A19051300]... Sun 09/17/2017 14:17:51 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:51 : Z-Wave device detected, retrieving info 5 Sun 09/17/2017 14:17:51 : [ZWAVE-TX ] [0105004A851A2F] Sun 09/17/2017 14:17:51 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:17:51 : [ZWAVE-RX ] [0107004A1A061300]... Sun 09/17/2017 14:17:51 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:51 : Adding Z-Wave devices stopped Sun 09/17/2017 14:17:51 : [ZWAVE-TX ] [01030020DC] Sun 09/17/2017 14:17:51 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:17:51 : [ZWAVE-RX ] [01080120EC772964]... Sun 09/17/2017 14:17:51 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] [01030002FE] Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] [0125010205001DBD]... Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] [01030005F9] Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] [0104010508F7] Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:52 : Device 24 of type 4.17.7 included into Z-Wave network Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] [0109001313027204]... Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] [0104011301E8] Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] [010500131B00F2] Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:52 : [ZWAVE-RX ] [010E000400130872]... Sun 09/17/2017 14:17:52 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:17:52 : Adding ISY node(s) for new Z-Wave device 24 type 4.17.7 Sun 09/17/2017 14:17:52 : [ZWAVE-ADD-NODE ] Add device: mfg 026E.4353.5A31, basic=0x04 gen=0x11 spec=0x07 I know that the linking was successful because the shade jogs which is the shade's tell for it. I can also exclude the device successfully, and try to add again, but same problem. The devices never show up in the tree, though the ISY seems to remember them. When I Sync New & Deleted Nodes I get this output for it. Sun 09/17/2017 14:52:44 : [ZWAVE-NODE-SYNC] ---- Start Processing Z-Wave Node 24 (0x18) ---- Sun 09/17/2017 14:52:44 : [ZWAVE-TX ] [010400601883] Sun 09/17/2017 14:52:44 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:52:44 : [ZWAVE-RX ] [01040160019B] Sun 09/17/2017 14:52:44 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:52:45 : [ZWAVE-RX ] [0114004984180E04]... Sun 09/17/2017 14:52:45 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:52:45 : [ZWAVE-TX ] [0109001318027204]... Sun 09/17/2017 14:52:45 : [ZWAVE-RX ] ACK Sun 09/17/2017 14:52:45 : [ZWAVE-RX ] [0104011301E8] Sun 09/17/2017 14:52:45 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:52:45 : [ZWAVE-RX ] [01050013900079] Sun 09/17/2017 14:52:45 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:52:45 : [ZWAVE-RX ] [010E000400180872]... Sun 09/17/2017 14:52:45 : [ZWAVE-TX ] ACK Sun 09/17/2017 14:52:45 : [ZWAVE-DB ] Warning: Database already exists for uid=24 0x18 Sun 09/17/2017 14:52:45 : Adding ISY node(s) for new Z-Wave device 24 type 4.17.7 Sun 09/17/2017 14:52:45 : [ZWAVE-ADD-NODE ] Add device: mfg 026E.4353.5A31, basic=0x04 gen=0x11 spec=0x07 Sun 09/17/2017 14:52:45 : [ZWAVE-NODE-SYNC] Processing Z-Wave Node 24 (0x18) Failed, node ignored How can I fix this ? Any help would be greatly appreciated Link to comment
stusviews Posted September 18, 2017 Share Posted September 18, 2017 Have you tried heal? synchronize? Link to comment
stephan Posted September 18, 2017 Author Share Posted September 18, 2017 Thanks for the reply. yes I tried heal and synchronize. On synchronize I get the message as pasted above Sun 09/17/2017 14:52:45 : [ZWAVE-DB ] Warning: Database already exists for uid=24 0x18 Sun 09/17/2017 14:52:45 : Adding ISY node(s) for new Z-Wave device 24 type 4.17.7 Sun 09/17/2017 14:52:45 : [ZWAVE-ADD-NODE ] Add device: mfg 026E.4353.5A31, basic=0x04 gen=0x11 spec=0x07 Sun 09/17/2017 14:52:45 : [ZWAVE-NODE-SYNC] Processing Z-Wave Node 24 (0x18) Failed, node ignored Link to comment
Michel Kohanim Posted September 18, 2017 Share Posted September 18, 2017 Hi stephan, What's the firmware version? With kind regards, Michel Link to comment
stephan Posted September 18, 2017 Author Share Posted September 18, 2017 Do you need the ISY firmware or the zwave dongle ? I'll check as soon as I am back home Link to comment
stephan Posted September 18, 2017 Author Share Posted September 18, 2017 ISY: v4.6.2 Z-Wave Version 4.55 Bootloader Version 1.03 Also, just want make sure my comment from above was noticed. I have the exact same model already working and I can remove and add it. But this last one that was part of my order doesn't seem to work to connect. Shd I send you some trace information ? Or do I need a reset ? I was trying to avoid a reset and re-enroll of all my devices -Stephan Link to comment
stusviews Posted September 19, 2017 Share Posted September 19, 2017 Is the ISY firmware and UI both 4.6.2? What's the result if you exclude the device (more than once)? Link to comment
stephan Posted September 19, 2017 Author Share Posted September 19, 2017 Hi, yes it is 4.6.2 for both the UI and the ISY firmware. I just did the add and then two removes and I get this ADD Mon 09/18/2017 22:01:00 : [ZWAVE-TX-NR ] [0105004AC16110] Mon 09/18/2017 22:01:00 : [UZW-CMD 1 ] Start Include Mon 09/18/2017 22:01:00 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:01:00 : [ZWAVE-RX ] [0107004A61010000]... Mon 09/18/2017 22:01:00 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:00 : Listening for Z-Wave devices to add to the network Mon 09/18/2017 22:01:10 : [ZWAVE-RX ] [0107004A61020000]... Mon 09/18/2017 22:01:10 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:10 : Z-Wave device detected, retrieving info 2 Mon 09/18/2017 22:01:10 : [ZWAVE-RX ] [0115004A6103190E]... Mon 09/18/2017 22:01:10 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:10 : Z-Wave device detected, retrieving info 3 Mon 09/18/2017 22:01:22 : [ZWAVE-RX ] [0107004A61051900]... Mon 09/18/2017 22:01:22 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:22 : Z-Wave device detected, retrieving info 5 Mon 09/18/2017 22:01:22 : [ZWAVE-TX ] [0105004A856257] Mon 09/18/2017 22:01:23 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:01:23 : [ZWAVE-RX ] [0107004A62061900]... Mon 09/18/2017 22:01:23 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:23 : Adding Z-Wave devices stopped Mon 09/18/2017 22:01:23 : [ZWAVE-TX ] [01030020DC] Mon 09/18/2017 22:01:23 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:01:23 : [ZWAVE-RX ] [01080120EC772964]... Mon 09/18/2017 22:01:23 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] [01030002FE] Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] [0125010205001DBD]... Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] [01030005F9] Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] [0104010508F7] Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:24 : Device 25 of type 4.17.7 included into Z-Wave network Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] [0109001319027204]... Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] [0104011301E8] Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] [0105001363008A] Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:24 : [ZWAVE-RX ] [010E000400190872]... Mon 09/18/2017 22:01:24 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:01:24 : Adding ISY node(s) for new Z-Wave device 25 type 4.17.7 Mon 09/18/2017 22:01:24 : [ZWAVE-ADD-NODE ] Add device: mfg 026E.4353.5A31, basic=0x04 gen=0x11 spec=0x07 SYNC Mon 09/18/2017 22:04:16 : [ZWAVE-NODE-SYNC] ---- Start Processing Z-Wave Node 25 (0x19) ---- Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] [010400601982] Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] [01040160019B] Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] [0114004984190E04]... Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] [0109001319027204]... Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] [0104011301E8] Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] [0105001364008D] Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-RX ] [010E000400190872]... Mon 09/18/2017 22:04:16 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:04:16 : [ZWAVE-DB ] Warning: Database already exists for uid=25 0x19 Mon 09/18/2017 22:04:16 : Adding ISY node(s) for new Z-Wave device 25 type 4.17.7 Mon 09/18/2017 22:04:16 : [ZWAVE-ADD-NODE ] Add device: mfg 026E.4353.5A31, basic=0x04 gen=0x11 spec=0x07 Mon 09/18/2017 22:04:16 : [ZWAVE-NODE-SYNC] Processing Z-Wave Node 25 (0x19) Failed, node ignored Mon 09/18/2017 22:04:16 : [ZWAVE-NODE-SYNC] -- Finished -- ISY/Z-Wave Node Sync -- REMOVE 1 Mon 09/18/2017 22:05:55 : [ZWAVE-TX-NR ] [0105004B0165D5] Mon 09/18/2017 22:05:55 : [UZW-CMD 2 ] Start Exclude Mon 09/18/2017 22:05:55 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:05:55 : [ZWAVE-RX ] [0107004B65010000]... Mon 09/18/2017 22:05:55 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:05:55 : Listening for Z-Wave devices to remove from the network Mon 09/18/2017 22:06:05 : [ZWAVE-RX ] [0107004B65020000]... Mon 09/18/2017 22:06:05 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] [0115004B6503190E]... Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] [0115004B6506190E]... Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:06 : Removing Z-Wave devices stopped Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] [01030020DC] Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] [01080120EC772964]... Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] [01030002FE] Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] [0125010205001DBD]... Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] [01030005F9] Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:06 : [ZWAVE-RX ] [0104010508F7] Mon 09/18/2017 22:06:06 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:06 : Device 25 excluded from Z-Wave network REMOVE 2 Mon 09/18/2017 22:06:34 : [ZWAVE-TX-NR ] [0105004B0166D6] Mon 09/18/2017 22:06:34 : [UZW-CMD 2 ] Start Exclude Mon 09/18/2017 22:06:34 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:34 : [ZWAVE-RX ] [0107004B66010000]... Mon 09/18/2017 22:06:34 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:34 : Listening for Z-Wave devices to remove from the network Mon 09/18/2017 22:06:43 : [ZWAVE-RX ] [0107004B66020000]... Mon 09/18/2017 22:06:43 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] [0115004B6603000E]... Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] [0115004B6606000E]... Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:44 : Removing Z-Wave devices stopped Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] [01030020DC] Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] [01080120EC772964]... Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] [01030002FE] Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] [0125010205001DBD]... Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] [01030005F9] Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] ACK Mon 09/18/2017 22:06:44 : [ZWAVE-RX ] [0104010508F7] Mon 09/18/2017 22:06:44 : [ZWAVE-TX ] ACK Hope any of that helps I really would like to get to the bottom of this. Very annoying that I cannot control this blind but the others work flawlessly. -Stephan Link to comment
stusviews Posted September 19, 2017 Share Posted September 19, 2017 Sometimes excluding a Z-Wave device first enables including the device correctly. Link to comment
stephan Posted September 19, 2017 Author Share Posted September 19, 2017 I tried that as well in my last attempt that I shared above, I just didn't get the logs for it Link to comment
stusviews Posted September 19, 2017 Share Posted September 19, 2017 What you posted shows adding first, then excluding. My suggestion was the reverse, exclude before include. In particular, after selecting exclude and pressing the device button, usually once or twice rapidly, the exclude panel should close if the exclude was successful. Link to comment
stephan Posted September 19, 2017 Author Share Posted September 19, 2017 Sorry for not being clear @stusviews. I did remove it first before adding when I did my testrun because I know it sometimes works in that case, but I did not capture the logs. Because of that I did not write it down in my earlier post. Link to comment
stephan Posted September 20, 2017 Author Share Posted September 20, 2017 I got this resolved. FYI for anyone who is interested: I opened a support ticket with UDI and Michael figured out that I hit the node limits of the basic version. Unfortunately the logs didn't say anything about that I upgraded now to the pro version and I can successfully add that device now Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.