tibbar Posted October 23, 2017 Posted October 23, 2017 Hi. I have nodelink and emoncms running on raspberry. Nodelink is configure on ISY according to instructions. I've put in "Write API Key" from emoncms. Under Node ID I have : ZW057_143.ST Installed devices I have: ISY Data Data Logger What else do I have to do(configure) so emoncms would recieve feed(data)? Do I put anything in nodeling in :Use custom address. Just started with nodelink so have no idea what I'm doing, forgive the ignorance. Thanks.
io_guy Posted October 23, 2017 Posted October 23, 2017 Node ID should be 0, that's not where you log. It's a generic setup. Custom address is IP address of your Pi. ISY Data logs nothing to Emon. Data Logger will log the variables you create in it's config. If you want to see a Zwave device value, you'll need to copy it to a variable via an ISY program.
tibbar Posted October 24, 2017 Author Posted October 24, 2017 Well.. My network resources stopped working. Here is the post I've made in Network Resources section of forum. https://forum.universal-devices.com/topic/22723-network-resources-not-working/
tibbar Posted October 24, 2017 Author Posted October 24, 2017 Well.. My network resources stopped working. Here is the post I've made in Network Resources section of forum. https://forum.universal-devices.com/topic/22723-network-resources-not-working/ Thanks to Michel I got it resolved. It was some bad programing on my behalf.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.