jahn Posted January 13, 2018 Posted January 13, 2018 I get an unsupported device adding this one. Will it be added or how can I add it?
stusviews Posted January 13, 2018 Posted January 13, 2018 Neither the siren nor motion sensor are supported in v.4. The motion sensor has partial support (you can't change the defaults). Both will probably have support in v.5. In the interim, you can manually create links,
Brian H Posted January 13, 2018 Posted January 13, 2018 The short time period it was sold. The Alert Module is also not in V4. firmware.
larryllix Posted January 14, 2018 Posted January 14, 2018 I ahve been using v5 ever since it started three years ago. The version have been beta and alpha but I have never seen a problem worth complaining about or affecting it's operation..
Techman Posted January 14, 2018 Posted January 14, 2018 I ahve been using v5 ever since it started three years ago. The version have been beta and alpha but I have never seen a problem worth complaining about or affecting it's operation.. Version 5.x.x has only be released as alpha.
larryllix Posted January 14, 2018 Posted January 14, 2018 Version 5.x.x has only be released as alpha. Almost. V5.0.1 and V5.02 were beta versions. V5.02 had the most problems I have ever had with ISY. Even that wasn't that bad, and alpha / beta assignment is not all that meaningful. I have had other devices with much more buggy code that were final releases. https://forum.universal-devices.com/forum/108-50/
Techman Posted January 14, 2018 Posted January 14, 2018 I stand corrected, I guess I missed the "beta" release.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.