FlaParrotHead Posted March 17, 2018 Posted March 17, 2018 Adding never used 2457D2 LampLinc dimmers. ISY-994i and UI both at v4.6.2. Any ideas? Sat 03/17/2018 17:40:21 : Start Insteon Device Linking Mode Sat 03/17/2018 17:40:21 : [LNK-BGN ] 02 64 01 00 06 Sat 03/17/2018 17:40:47 : [LNK-STAT ] 02 53 M(01) gid=00 2E.68.7E 010E 43 Sat 03/17/2018 17:40:47 : [2E.68.7E 00] Linked device type=01.0E fw=43 Sat 03/17/2018 17:40:47 : [2E 68 7E 0 ] Added to list of devices to link to ISY Sat 03/17/2018 17:40:47 : [LNK-BGN ] 02 64 01 00 06 Sat 03/17/2018 17:41:29 : Stop Insteon Device Linking Mode, Final processing to follow Sat 03/17/2018 17:41:29 : [INST-TX-I1 ] 02 62 2E 68 7E 0F 0D 00 Sat 03/17/2018 17:41:29 : [LNK-END ] 02 65 06 Sat 03/17/2018 17:41:29 : [Std MH ] Unexpected Ack imCmd=65 cmd1= 0x7E Sat 03/17/2018 17:41:30 : [INST-ACK ] 02 62 7E.0F.00 0F 11 00 06 LTONRR (00) Sat 03/17/2018 17:41:34 : [INST-TX-I1 ] 02 62 2E 68 7E 0F 0D 00 Sat 03/17/2018 17:41:34 : [INST-ACK ] 02 62 68.7E.0F 0D 00 00 06 (00) Sat 03/17/2018 17:41:43 : [INST-TX-I1 ] 02 62 2E 68 7E 0F 0D 00 Sat 03/17/2018 17:41:43 : [UNKNOWN ] 02 2E Sat 03/17/2018 17:41:47 : [2E 68 7E 0 ] Failed to add device, reason 3 Sat 03/17/2018 17:41:48 : [ Time] 17:41:49 0(0) Sat 03/17/2018 17:41:48 : [All ] Writing 0 bytes to devices Sat 03/17/2018 17:41:48 : [All ] Writing 0 bytes to devices
Michel Kohanim Posted March 18, 2018 Posted March 18, 2018 Hi FlaParrotHead, This is due to signal noise. Please try moving the PLM to a different outlet and one which is not shared with other transformers and power supplies. With kind regards, Michel
Recommended Posts