dismania Posted October 8, 2018 Share Posted October 8, 2018 I have 2 locations where I have fanlinc fan controllers installed and 6 button controllers replacing the switch. I basically want the buttons to be as follows: Top - Fan light on 2nd left - fan high 2nd right- fan medium 3rd left - fan low 3rd right - fan off Bottom Fan light off I am struggling with this. How do I program them so that they do what I want, AND the lights on the keypad show the current state of the Fanlinc? Advice accepted freely! Dismania Link to comment
dbuss Posted October 8, 2018 Share Posted October 8, 2018 @dismania, Check this out. https://wiki.universal-devices.com/index.php?title=ISY994i:INSTEON_Device:FanLinc-KPL_FanLinc_KeypadLinc_Configuration Link to comment
dismania Posted October 8, 2018 Author Share Posted October 8, 2018 I am trying this. I have also created a scene with Fan Light and Switch -On in it. Made switch On the controller for the light, light is a responder. But, the light is on and the button on the controller is off, how do they get synchronized? Link to comment
dbuss Posted October 8, 2018 Share Posted October 8, 2018 8 minutes ago, dismania said: I am trying this. I have also created a scene with Fan Light and Switch -On in it. Made switch On the controller for the light, light is a responder. But, the light is on and the button on the controller is off, how do they get synchronized? Read through this post. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.