Insteon Controller & Responder Question

[cfluser]

I can manually connect my insteon devices to be both controller & responders, and it shows up perfectly within ISY console.  I can't seem to find out how to add devices via the ISY console to be both controller & responder.  I add the device as controller to a scene, works fine - then I go back and try to add again as a resonder, no go.  Says already in scene.  Yet, as I already mentioned, I can go manually and link devices together as controller and responder and it works and looks perfectly under the ISY console. 

Any help would be great!

 

[oberkc]

In the case of ISY-994, a controller is, by default, also a responder.

[LarryM]

For example with a 2477D added to a Scene as a Controller only:

When you click on the Scene ‘itself’ you should see, on the lower right hand side of the screen, the device and it’s settings as as a Responder.

When you make changes to these settings, then when the device is toggled ON these settings become active.

 

 

 

 

[Brian H]

When you are using an ISY994i. Do not use manual linking of modules. Allow the ISY994i to do everything.

Also a good idea to do a Factory Reset on all new modules before using them. Test links are sometimes in a module from the factory and it can cause issues.

[LarryM]

And, do a factory reset on your devices before proceeding to use them with the ISY.