stillen_i30 Posted July 9, 2019 Posted July 9, 2019 My ISY started acting weird yesterday morning, lights were on and programs not working. Got the 403-Library error and asking if I agree to the licensing agreement, no device status in ISY. Removed and re-inserted SD card which solved the issue. Now my Z-wave devices are out of whack. Every time I log in, it cannot communicate with 3 of the 4 Zwave locks. I have two repeaters. I did a "repair links" command for each repeater and lock and still not working. I know the zwave stuff can be really finicky if one little thing goes wrong with the system. Anyone know what else I could try before I have to delete and re-install each of the z-wave devices again? I'm on 5.0.13C TIA
lilyoyo1 Posted July 9, 2019 Posted July 9, 2019 I would check your repeaters to make sure they are working and do a heal. The problem with having the bare minimum when it comes to repeaters is when something goes wrong. The self healing properties of zwave can't bail you out since there are no alternatives
Recommended Posts