Honeywell SD8100 with C072

[Swede1973]

Hello everyone.

I have got a problem that I could need some help with.

Some time ago I closed my shop (plumbing) and took down the alarm system before I left.

I is a Honeywell SD8100 with a C072 and PIR, door contacts, smoke detectors and sirens.

Stupid me never checked how to whole system was set up or wired (i just cut all the cords and packed it in a box).

However, now i would like to set this alarmsystem up at my house and could need some help on how to connect all the devices.

All the devices are labeled and i have some sort of indications what goes where but need som expert help.

I would also like to know if its possible to reprogram the central unit with a new SIM card that phones my mobile i case of an alarm.

And of course if its possible to monitor the whole alarm with an app on iPhone.

 

The system in question is an all wired:

Honeywell SD8100 Main panel (C007-L-SD) x 1,

Honeywell Rio (C072) x 1

Honeywell Keypad ( CP051) x 1

Interlogix PIR (DDV1016AM) x 6

Aritech smokedetectors (DP721RT) x 2

Interlogix Siren (AS210N-L) x 2

Alarmtech magnet contacts (B-582-0013) x 3

Axis Companion Switch 4CH x 1

Axis Camera (M1145L) x 1

All the devices are already installed with EOL resistors etc so I only need the wiring diagram on how to connect all the things and in particular the C072.

 

If you know how to please do not hesitate to contact me.

Oh, this system was originally install by the Swedish Security company Securitas Direct (same as the English Securitas/ G4S), but they of course do not want to help at all.