pyrorobert Posted February 18, 2021 Posted February 18, 2021 Hello io_guy, I recently had my Raspberry Pi that was running Nodelink totally crash, so I decided to install Nodelink on my PC that runs my cameras. I read through your instructions but I have run into a few issues. You mentioned in some of your instructions that I need to download a zip file. I have only been able to download the JSON and DLL files. I do have NET core 3.1 installed. It seems like I am missing a few steps. Any other information you can provide would greatly be appreciated. Thank you Regards, Robert Sent from my SM-N986U using Tapatalk Quote
macjeff Posted February 18, 2021 Posted February 18, 2021 (edited) You need .net v5 installed first. It no longer works with 3.1. I ran it on a mac for a while and now on a pi. I would highly recommend fixing or replacing your Pi. But if you did not see it, you can download a short setup guide here http://automationshack.com/Files/NodeLink_Setup.pdf Edited February 18, 2021 by macjeff Quote
io_guy Posted February 19, 2021 Posted February 19, 2021 Latest versions require .NET 5 installed. Download http://automationshack.com/Files/NodeLink.cmd and put/run it in your NodeLink dir. Quote
pyrorobert Posted February 19, 2021 Author Posted February 19, 2021 I will give that a shot. Thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.