Migrated to Polisy (having some issues)

[joedunn]

ISY Firmware 5.3.0

Polisy Version 2

Polisy Version 2.2.13

Exported backup from polygot running on virtual machine. Powered off virtual machine.

Connected Polisy, logged in, uploaded backup and restored. Installed polygots (I guess restore does not fetch them). Polygots are running but not working. For example, when I attempt to turn off Caseta lights or Hue bulbs aren't responding. I get various errors, like the screen shots attached. Polisy also shows the following: ISY Version: 0.0.0.

 

I see things like this from the logs for the hue polygot:

 

2021-05-26 16:40:18,941 Controller polyinterface INFO polyinterface:reportDriver: Updating Driver 880100d5cc380b - GV6: 0, uom: 2 2021-05-26 16:40:33,947 Controller polyinterface INFO polyinterface:reportDriver: Updating Driver 880100d5cc380b - GV6: 1, uom: 2

Not sure what I did wrong but any pointers appreciated. 

[hart2hart]

One thing to look at is the IP address. I set the IP address of the Polisy the same as the RPi polyglot was installed on. And cut off RPi before bringing up the Polisy and doing the restore.

The ISY store s IP address of nodes.

[joedunn]

When i go to the Polisy configuration it just hangs saying "Please wait, getting configuration"

[joedunn]

Well I got the configuration working by following the steps in this post 

I changed the IP to my old polygot server, still no dice with the nodes working though. I also get the following error when attempting to turn on a Hue light via the ISY interface (see attached)

 

 

 

[asbril]

I use some 10 nodeservers and I make great use of them. Unfortunately a few nodeservers need an occasional restart in the Polisy dashboard, when they stop working in my ISY. That can create havoc to my wake-up programs.

I wonder whether it is possible, either in ISY or in Polisy, to set an automatic restart of nodeservers. I tried a program with Re-Discover, but that does not resolve the issue.

[Michel Kohanim]

@asbril,

No. A better question is: why do they. Please send logs to support@universal-devices.com.

With kind regards,
Michel