macbannai Posted May 31, 2021 Share Posted May 31, 2021 I'd like to control the color changing bulbs I have with Wiz just like I am able to with Philips Hue. I'm curious if anyone has had any success in creating a nodeserver to integrate polisy with the Wiz multi-color smart lights? https://www.wizconnected.com/en-US/consumer/ From their website it appears the integrate with IFTT, Alex and Google. Link to comment Share on other sites More sharing options...
lilyoyo1 Posted May 31, 2021 Share Posted May 31, 2021 59 minutes ago, macbannai said: I'd like to control the color changing bulbs I have with Wiz just like I am able to with Philips Hue. I'm curious if anyone has had any success in creating a nodeserver to integrate polisy with the Wiz multi-color smart lights? https://www.wizconnected.com/en-US/consumer/ From their website it appears the integrate with IFTT, Alex and Google. Currently is not supported. While there's no guarantee a developer will take this on as a project, it'll help your chances if you could find out if they have an open API to use to develop against. If there is an open API, i would post that. The more you assist with providing the necessary documentation, the heater the chance someone will be in helping you Link to comment Share on other sites More sharing options...
macbannai Posted June 1, 2021 Author Share Posted June 1, 2021 Understood lilyoyo1, I would be curious if it's possible to leverage access to their API through their WizPro? https://docs.pro.wizconnected.com/#introduction If not, I'll keep looking. Link to comment Share on other sites More sharing options...
lgilsenberg Posted July 10, 2021 Share Posted July 10, 2021 I know this is probably not the most elegant way to do it, but . . . I have 10 wiz bulbs that I control with the ISY through a roundabout way. I set variables to be motion detectors that Alexa picks up in Routines. These routines set the scene and/or brightness of the Wiz bulbs. Link to comment Share on other sites More sharing options...
brandwidth Posted September 1, 2021 Share Posted September 1, 2021 On 7/10/2021 at 5:35 PM, lgilsenberg said: I know this is probably not the most elegant way to do it, but . . . I have 10 wiz bulbs that I control with the ISY through a roundabout way. I set variables to be motion detectors that Alexa picks up in Routines. These routines set the scene and/or brightness of the Wiz bulbs. It's better than nothing, for sure. What typical latency do you see for controlling the bulbs? Link to comment Share on other sites More sharing options...
lgilsenberg Posted September 1, 2021 Share Posted September 1, 2021 I'm seeing about a 1 second delay. Link to comment Share on other sites More sharing options...
Recommended Posts