Jump to content
View in the app

A better way to browse. Learn more.
Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Everspring ST814-2 temp sensor - no nodes created in 5.3.3

madmartian
in Z-Wave - Series 300/500

Featured Replies

Posted

Just got this on ebay. Reset it first. Then tried to include it. Inclusion worked, but no nodes were created. Weird, So then I excluded it, then included it again. Both appeared to work with no errors, but again no nodes created. Is 5.3.3 broken with respect to the Everspring ST814-2? I can tell from old threads it was working in the past (2015, likely with the 300 board). I have the 500 series Z-Wave board. I know this is not a "Plus" device, but in theory it should still work.

8 hours ago, madmartian said:

Just got this on ebay. Reset it first. Then tried to include it. Inclusion worked, but no nodes were created. Weird, So then I excluded it, then included it again. Both appeared to work with no errors, but again no nodes created. Is 5.3.3 broken with respect to the Everspring ST814-2? I can tell from old threads it was working in the past (2015, likely with the 300 board). I have the 500 series Z-Wave board. I know this is not a "Plus" device, but in theory it should still work.

Are you sure it's not the device? Its did come from ebay

Guest
This topic is now closed to further replies.
https://forum.universal-devices.com/topic/32872-everspring-st814-2-temp-sensor-no-nodes-created-in-533/
Go to topic listing

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.