TJF1960 Posted August 6, 2021 Posted August 6, 2021 I have Polisy, on v5.0.4, has been running for 3 days or so. Have 8 poly nodes onboard and am feeding nodelink to the onboard ISY from rpi4. I went to open Poly and it wouldn't open. I ssh'ed in to reboot polisy and got this message: Quote [admin@polisy ~]$ sudo shutdown now sudo: unable to write to /var/run/sudo/ts/admin: No space left on device Password: So then ran df -h to check disk space and reported this: [admin@polisy ~]$ df -h Filesystem Size Used Avail Capacity Mounted on zudi/ROOT/default 25G 25G 0B 100% / devfs 1.0K 1.0K 0B 100% /dev procfs 4.0K 4.0K 0B 100% /proc zudi 24K 24K 0B 100% /zudi zudi/var/empty 24K 24K 0B 100% /var/empty zudi/tmp 27K 27K 0B 100% /tmp zudi/usr/home 34K 34K 0B 100% /usr/home zudi/var/polyglot 20M 20M 0B 100% /var/polyglot zudi/var/log 249K 249K 0B 100% /var/log zudi/var/db 30M 30M 0B 100% /var/db zudi/var/run 43K 43K 0B 100% /var/run zudi/var/crash 24K 24K 0B 100% /var/crash zudi/var/tmp 24K 24K 0B 100% /var/tmp zudi/var/db/pkg 9.3M 9.3M 0B 100% /var/db/pkg [admin@polisy ~]$ After reboot the ssh screen greeting is much different and this is the df -l report Using username "admin". Keyboard-interactive authentication prompts from server: | Password for admin@polisy: End of keyboard-interactive prompts from server [admin@polisy ~]$ df -l Filesystem 1K-blocks Used Avail Capacity Mounted on zudi/ROOT/default 26064973 26064973 0 100% / devfs 1 1 0 100% /dev procfs 4 4 0 100% /proc zudi/tmp 26 26 0 100% /tmp tmpfs 32768 348 32420 1% /var zudi/usr/home 34 34 0 100% /usr/home tmpfs 32768 348 32420 1% /var tmpfs 32768 348 32420 1% /var zudi 24 24 0 100% /zudi tmpfs 32768 348 32420 1% /var tmpfs 32768 348 32420 1% /var tmpfs 32768 348 32420 1% /var zudi/tmp 26 26 0 100% /tmp zudi/var/polyglot 20521 20521 0 100% /var/polyglot tmpfs 32768 348 32420 1% /var tmpfs 32768 348 32420 1% /var [admin@polisy ~]$ I cannot still gain access to Poly and now I cannot access ISY thru the launcher either. Any thoughts on how I should proceed? Thanks, -Tim Quote
Bumbershoot Posted August 6, 2021 Posted August 6, 2021 You'll probably need to open a support ticket. 1
Recommended Posts