EZSnsRF with IR-3000 / Nighttime operation?

[kcrossley]

Thanks to 2.7.7, I was finally able to get my EZSnsRF to play nicely with my IR-3000 infrared detector. Both devices are now in a scene and trigger outdoor lights when a guest and/or intruder approaches the house. I only have one problem remaining. How can I only get this to operate at night?

 

Thanks,

Kelly

[Michel Kohanim]

Hi Kelly,

 

Good to know and thanks so very much for the update.

 

For that to work, you will have to use programs (not scenes) ...

 

With kind regards,

Michel

Thanks to 2.7.7, I was finally able to get my EZSnsRF to play nicely with my IR-3000 infrared detector. Both devices are now in a scene and trigger outdoor lights when a guest and/or intruder approaches the house. I only have one problem remaining. How can I only get this to operate at night?

 

Thanks,

Kelly

[jbwood1]

Hi, I just got my ISY99i and all works very well, except for one thing.

 

I bought an EZSnsRF & Dakota Transmitter. I was able to get the device recognized by the ISY99i, but it does not report any on/off status, and I can't get it to work in a program. If I use it it a scene, it works most of the time but the responders in the scene do not update their on/off status.

 

Any help with this would be appreciated.

 

Firmware version 2.7.7